[ANN][POOL] [min payout 0.005BTC][0.1%FEES]StarPool - Multi Mining Pool - page 8.

1manshow

newbie

Activity: 68

Merit: 0

Quote from: fuaimo3 on March 10, 2018, 12:38:22 AM

Quote from: 1manshow on March 09, 2018, 11:52:33 PM

Quote from: fuaimo3 on March 09, 2018, 11:14:22 PM

Quote from: 1manshow on March 09, 2018, 06:28:52 AM

I want to use this pool for my Baikal Giant X10, does anyone know the proper configuration parameters for this device? I tried instructions from previous posts but miner gets down several times and very low earnings over few hours. There is not much help documentation available on the pool website itself. Undecided

Earnings should be measured in 24 hour increments for better accuracy. Yesterday was a great day on the pool still pull over 25 per miner per day on the x10.

First field put your wallet address next in password field put c=btc,quark,qubit,myr-gr,skien=.5

Then add each algo server so it will need 4 spots. There's config info here as well to better explain.

https://bitcointalk.org/index.php?topic=2170308.2460

First of all, let me thank you for reading and replying to my post. Very much grateful to you for your help.

I already configured according to that post, just used LTC as coin but my past 24 hour earnings were meager as you can see from this address - https://www.starpool.biz/?address=LiE3WVDzcWBg3T9aZpwTcX9i74V9Pp6gke

Can you please show me your Baikal X10 miner settings page screenshot so that I can check and review what I did wrong? Since configuring this pool details yesterday, my miner is unable to stay online for more than 5 mins and most of the times it's miner down. Mining pool hub and nicehash never had this issue with same miner when configured, they could simply run forever. Any way I can reset the miner to factory defaults other than reflashing via SDcard? I can do SSH access and run commands if required.

Thanks for your help once again, hope I can do the same like you on this pool soon.

Weird, non of my miners ever go down due to the pool just to getting stuck between switching. Maybe you have a dud?

Anyway under user I just have my wallet address, under pass I don't use a factor of 1 like they show configured in the post, I use the built in factors only cutting skien in half due to 5ghz rate limit.

so my pass looks like this: c=BTC,quark,qubit,myr-gr,skein=.5

Then I simply have the 4 servers added with that password entered in each for the auto algo switching. I have 100 percent up time for nearly a month. Good luck.

Thanks for your help mate. I've reflashed new firmware for X10 from December via SDCARD and it works fine thereafter with pool, let's see how it pans out for next day. Hope it earns better than MPH which I was using for this past month since getting this miner.

Selector79

newbie

Activity: 87

Merit: 0

Hello.

Is it possible in the settings to disable only one coin of algorithm?

In a Quark algorithm I would disable a quarkcoin. It takes only miner capacity and do not earn something.

Are there some commands for Baikal Giant X10 to disable this coin, but mine other coins in an algorithm?

Thanks in advance

fuaimo3

newbie

Activity: 46

Merit: 0

Quote from: 1manshow on March 09, 2018, 11:52:33 PM

Quote from: fuaimo3 on March 09, 2018, 11:14:22 PM

Quote from: 1manshow on March 09, 2018, 06:28:52 AM

I want to use this pool for my Baikal Giant X10, does anyone know the proper configuration parameters for this device? I tried instructions from previous posts but miner gets down several times and very low earnings over few hours. There is not much help documentation available on the pool website itself. Undecided

Earnings should be measured in 24 hour increments for better accuracy. Yesterday was a great day on the pool still pull over 25 per miner per day on the x10.

First field put your wallet address next in password field put c=btc,quark,qubit,myr-gr,skien=.5

Then add each algo server so it will need 4 spots. There's config info here as well to better explain.

https://bitcointalk.org/index.php?topic=2170308.2460

First of all, let me thank you for reading and replying to my post. Very much grateful to you for your help.

I already configured according to that post, just used LTC as coin but my past 24 hour earnings were meager as you can see from this address - https://www.starpool.biz/?address=LiE3WVDzcWBg3T9aZpwTcX9i74V9Pp6gke

Can you please show me your Baikal X10 miner settings page screenshot so that I can check and review what I did wrong? Since configuring this pool details yesterday, my miner is unable to stay online for more than 5 mins and most of the times it's miner down. Mining pool hub and nicehash never had this issue with same miner when configured, they could simply run forever. Any way I can reset the miner to factory defaults other than reflashing via SDcard? I can do SSH access and run commands if required.

Thanks for your help once again, hope I can do the same like you on this pool soon.

Weird, non of my miners ever go down due to the pool just to getting stuck between switching. Maybe you have a dud?

Anyway under user I just have my wallet address, under pass I don't use a factor of 1 like they show configured in the post, I use the built in factors only cutting skien in half due to 5ghz rate limit.

so my pass looks like this: c=BTC,quark,qubit,myr-gr,skein=.5

Then I simply have the 4 servers added with that password entered in each for the auto algo switching. I have 100 percent up time for nearly a month. Good luck.

1manshow

newbie

Activity: 68

Merit: 0

Quote from: fuaimo3 on March 09, 2018, 11:14:22 PM

Quote from: 1manshow on March 09, 2018, 06:28:52 AM

I want to use this pool for my Baikal Giant X10, does anyone know the proper configuration parameters for this device? I tried instructions from previous posts but miner gets down several times and very low earnings over few hours. There is not much help documentation available on the pool website itself. Undecided

Earnings should be measured in 24 hour increments for better accuracy. Yesterday was a great day on the pool still pull over 25 per miner per day on the x10.

First field put your wallet address next in password field put c=btc,quark,qubit,myr-gr,skien=.5

Then add each algo server so it will need 4 spots. There's config info here as well to better explain.

https://bitcointalk.org/index.php?topic=2170308.2460

First of all, let me thank you for reading and replying to my post. Very much grateful to you for your help.

I already configured according to that post, just used LTC as coin but my past 24 hour earnings were meager as you can see from this address - https://www.starpool.biz/?address=LiE3WVDzcWBg3T9aZpwTcX9i74V9Pp6gke

Can you please show me your Baikal X10 miner settings page screenshot so that I can check and review what I did wrong? Since configuring this pool details yesterday, my miner is unable to stay online for more than 5 mins and most of the times it's miner down. Mining pool hub and nicehash never had this issue with same miner when configured, they could simply run forever. Any way I can reset the miner to factory defaults other than reflashing via SDcard? I can do SSH access and run commands if required.

Thanks for your help once again, hope I can do the same like you on this pool soon.

fuaimo3

newbie

Activity: 46

Merit: 0

Quote from: 1manshow on March 09, 2018, 06:28:52 AM

I want to use this pool for my Baikal Giant X10, does anyone know the proper configuration parameters for this device? I tried instructions from previous posts but miner gets down several times and very low earnings over few hours. There is not much help documentation available on the pool website itself. Undecided

Earnings should be measured in 24 hour increments for better accuracy. Yesterday was a great day on the pool still pull over 25 per miner per day on the x10.

First field put your wallet address next in password field put c=btc,quark,qubit,myr-gr,skien=.5

Then add each algo server so it will need 4 spots. There's config info here as well to better explain.

https://bitcointalk.org/index.php?topic=2170308.2460

tufail_74

newbie

Activity: 72

Merit: 0

dear i know google helps. i tried but could get clear idea hence posted here.
if you cannot help no need to reply. this request was for the starpool admin or any other who can write help.

narousberg

legendary

Activity: 1753

Merit: 1007

Quote from: tufail_74 on March 09, 2018, 12:13:47 PM

i wanna mine with my 1070ti but no help on the pool page.

google help you

tufail_74

newbie

Activity: 72

Merit: 0

i wanna mine with my 1070ti but no help on the pool page.

narousberg

legendary

Activity: 1753

Merit: 1007

Hi Dev
please improve your pool API and increase in BTC/GH/DAY parameter accuracy. At the moment we can read only 5 digits after "," but need 8 digits.

Awesome Miner app has added possibility for adding yiimp based pools in statistic and profit switching procedure. I have added starpool.biz and BTC/GHS/DAY param deliver us only 5 digits after coma. This accuracy is not enough today. Or this trouble on AM side?

Regards

1manshow

newbie

Activity: 68

Merit: 0

I want to use this pool for my Baikal Giant X10, does anyone know the proper configuration parameters for this device? I tried instructions from previous posts but miner gets down several times and very low earnings over few hours. There is not much help documentation available on the pool website itself. Undecided

nightpainter

newbie

Activity: 37

Merit: 0

Quote from: ?? on ??

Just to verify, if I set a LTC wallet address in my worker field i will be paid in LTC right? Does it HAVE to be a BTC address like the website says? Thx...also I left out a difficulty argument. Is that ok (adjust automatically) or is d=128000 still recommended for an L3+?

This tripped me up, also. The literal documentation is incongruous.

But my experience has shown that setting 'LTC' with an LTC payment address works out, as one would logically assume.

Welcome to the pool.

servantes173

newbie

Activity: 8

Merit: 0

Can you guys explain and list fee's, TX fees for each currency and conversion fee's, i cant find this information anywhere and i cant switch our farms over if i dont have these numbers.

Thanks!

Quote from: StarPoolBiz on October 30, 2017, 09:34:05 AM

From March 6, the pool fee will be 0.1%.

StarPool.Biz

- BTC Payouts
- 70+ Scrypt currencies
- 50+ X11 currencies
- 20+ Sha256 currencies
- DDoS Protected
- AutoSwitch pool
- Auto Exchange
- EU(DE) based pool

Payouts occur every 8 hours for balances over 0.005BTC. If you don't earn that much, every Sunday miners with 0.001BTC or more are paid out.

X11 Mining
Bitmain D3 Settings:

Code:

URL: x11.starpool.biz:3533#xnsub
Worker: 
Password: c=,d=92

Scrypt Mining
Bitmain L3+ Settings:

Code:

URL: scrypt.starpool.biz:3433#xnsub
Worker: 
Password: c=,d=128000

SHA256 Mining

Code:

URL: sha256.starpool.biz:3333#xnsub
Worker: 
Password: c=

X13 Mining

Code:

URL: x13.starpool.biz:3633#xnsub
Worker: 
Password: c=

Qubit Mining

Code:

URL: qubit.starpool.biz:4733#xnsub
Worker: 
Password: c=

Quark Mining

Code:

URL: quark.starpool.biz:4033#xnsub
Worker: 
Password: c=

Lyra2REv2 Mining

Code:

URL: lyra2v2.starpool.biz:4533#xnsub
Worker: 
Password: c=

NeoScrypt Mining

Code:

URL: neoscrypt.starpool.biz:4233#xnsub
Worker: 
Password: c=

Myriad-Groestl Mining

Code:

URL: myr-gr.starpool.biz:5433#xnsub
Worker: 
Password: c=

Skein Mining

Code:

URL: skein.starpool.biz:4933#xnsub
Worker: 
Password: c=

X17 Mining

Code:

URL: x17.starpool.biz:3737#xnsub
Worker: 
Password: c=

Blake2S Mining

Code:

URL: blake2s.starpool.biz:5766#xnsub
Worker: 
Password: c=

NIST5 Mining

Code:

URL: nist5.starpool.biz:3833#xnsub
Worker: 
Password: c=

www.starpool.biz
HAPPY MINING, KEEP TO GET THE PROFIT

brokerods

newbie

Activity: 5

Merit: 0

Hi Starpool.

Is this correct? The value of the mined Digibyte is less than what was actually mined?

https://imgur.com/a/PxTx8

Thanks!

Merlig

member

Activity: 143

Merit: 11

Quote from: Merlig on March 05, 2018, 01:27:41 PM

Quote from: StarPoolBiz on March 05, 2018, 11:30:20 AM

Quote from: Merlig on March 05, 2018, 10:51:07 AM

Hello I'am mining Phils so far so good.
But today I got problems with the last 2 payments they don't arrive my wallet.
When I look for the transaction ID, I got an error in the Blockexplorer the ID is unknown.

Search found no results for: xxxxxxx

Please tell me your wallet.

send you a PM

I received my coins.
Thank you for your help.

1DryVallley

newbie

Activity: 18

Merit: 0

I have 2 miner logged in.
D3 (X11) that found 20 blocks in the last 24 hours

T9+ (SHA256) that found 14 blocks in the past 24 hours.

The T9 shows only about 0.5 utility and is not making me much money. D I did not set but shows 262,144 on the work page.

Address is: XnBE3vyMHYfDAyQDgG4JyfEpAuxTHyS94B

What do you suggest to improve utility and profit?

Merlig

member

Activity: 143

Merit: 11

Quote from: StarPoolBiz on March 05, 2018, 11:30:20 AM

Quote from: Merlig on March 05, 2018, 10:51:07 AM

Hello I'am mining Phils so far so good.
But today I got problems with the last 2 payments they don't arrive my wallet.
When I look for the transaction ID, I got an error in the Blockexplorer the ID is unknown.

Search found no results for: xxxxxxx

Please tell me your wallet.

send you a PM

StarPoolBiz

member

Activity: 137

Merit: 10

Quote from: Merlig on March 05, 2018, 10:51:07 AM

Hello I'am mining Phils so far so good.
But today I got problems with the last 2 payments they don't arrive my wallet.
When I look for the transaction ID, I got an error in the Blockexplorer the ID is unknown.

Search found no results for: xxxxxxx

Please tell me your wallet.

Merlig

member

Activity: 143

Merit: 11

Hello I'am mining Phils so far so good.
But today I got problems with the last 2 payments they don't arrive my wallet.
When I look for the transaction ID, I got an error in the Blockexplorer the ID is unknown.

Search found no results for: xxxxxxx

narousberg

legendary

Activity: 1753

Merit: 1007

Wow! nice fee 0.1%

narousberg

legendary

Activity: 1753

Merit: 1007

Dev, check some new coins from this pool: http://minpool.net/site/mining

Topic: [ANN][POOL] [min payout 0.005BTC][0.1%FEES]StarPool - Multi Mining Pool - page 8. (Read 29051 times)