Guys I've made some calculations and my actual profits (3 day span) are pretty much 62% of what they should be if I were receiving the amount displayed by the miner when mining. The profits are also lower than what whattomine suggests and more in line with what I've been profiting when using Nicehash (pretty much the same $$$ per day as with nicehash a week ago, when it was still working). I've seen ~60% mentioned here before, so that's definitively another case of that.
I'm using aaronsace's miner. Multi algo + Auto exchange to BTC.
For some reason I'm also pretty much mining ZCoin 90% of the time, despite it not being a top algorithm on the mining hub page at a given time, losing to VTC, Mona and some others.
I'm pretty confused. Either there's something messed up, or I messed up. i wish someone could help me with this.
I'm switching to WinMiner for the time being, I can't seem to be able to figure this out. I love the idea of miningpoolhub but losing ~35% profits is too much.
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 134. (Read 487870 times)
December 12, 2017, 03:50:13 AM
December 12, 2017, 03:42:30 AM
Nothing I have tried has enabled me to mine on miningpoolhub.
I've tried Awesome miner. NO dice.
Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.
Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.
So what does one do to make miningpoolhub work?
I've tried Awesome miner. NO dice.
Nemo. red print on screen, no mining, if another BTC address other than his is used. It works and auto-switches just fine as long as Nemo's raking in the coins. Other than that, nope. ONLY thing I switched was the Bitcoin address in the .bat file.
Does anyone make any money on this pool? What software? I am trying to multi-algo, but so far, Nicehash looks better than you all put together, even though it's down.
So what does one do to make miningpoolhub work?
MiningPoolHub is a pool not a miner. There are zero problems with MiningPoolHub.
All miners connect to pools via a stratum connection protocol.
MiningPoolHub requires to use a username, not a BTC address. The -address command (in start.bat of) MultiPoolMiner is irrelevant when using miningpoolhub as your primary pool. Make sure you include your MiningPoolHub username!
December 12, 2017, 03:34:32 AM
hi,
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx
For example I doing mine on MonaCoin and VertCoin, you must see the MonaCoin --> Workers and yourname must be Orange for active and you can see the hashrate and also you can select MonaCoin --> Pool and must find yourname in the Contributor Hashrates. I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx
December 12, 2017, 03:30:13 AM
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
NiceHash blocked MiningPoolHub; MultiPoolMiner works with Excavator miner and can bypass the block.
December 12, 2017, 03:26:19 AM
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
Use of the Claymore for mine daggerhashimoto on Nvidia cards. [
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
December 12, 2017, 03:22:51 AM
hi,
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx
I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted).
Thx
December 12, 2017, 03:19:02 AM
Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)
What is your graphic cards and core freq?Amd cards on crypto needs higher core freq for better performance and GTX 1060 is not profit on crypto.
December 12, 2017, 03:12:31 AM
Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?
I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
Which option did you choose for AutoExchange?I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
Which coin you wanna mining?
December 12, 2017, 03:07:32 AM
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
[
{"time":0,"commands":[
{"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]}
]},
{"time":3,"commands":[
{"id":1,"method":"worker.add","params":["0","0"]}
]},
{"time":10,"loop":10,"commands":[
{"id":1,"method":"worker.print.speed","params":["0"]},
{"id":1,"method":"algorithm.print.speeds","params":["0"]}
]}
December 12, 2017, 02:58:17 AM
Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?
I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
December 12, 2017, 02:06:17 AM
Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)
December 11, 2017, 11:48:47 PM
You've deleted the NiceHash API.
"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder.
Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine? I had to disable Lyra2z to get it stop mining Zcoin. There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now.
December 11, 2017, 11:44:24 PM
You've deleted the NiceHash API.
"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder.
Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine? I had to disable Lyra2z to get it stop mining Zcoin. There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now.
December 11, 2017, 11:28:45 PM
NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin. I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good. https://imgur.com/a/cC3G5
I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsW
This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC.
Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64
This is my batch file to start it.
Here's a log file. http://ge.tt/37QdNhn2
Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance.
I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsW
This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC.
Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64
This is my batch file to start it.
Code:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"
Here's a log file. http://ge.tt/37QdNhn2
Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance.
You've deleted the NiceHash API.
"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
December 11, 2017, 11:22:47 PM
NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin. I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good. https://imgur.com/a/cC3G5
I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsW
This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC.
Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64
This is my batch file to start it.
Here's a log file. http://ge.tt/37QdNhn2
Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance.
I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsW
This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC.
Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64
This is my batch file to start it.
Code:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"
Here's a log file. http://ge.tt/37QdNhn2
Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance.
December 11, 2017, 10:53:13 PM
Anybody using EthOS??
I am wondering how I need to setup my ccminer to auto switch
just list like proxypool1 proxypool2??
should be enough to the auto switch?
I am wondering how I need to setup my ccminer to auto switch
just list like proxypool1 proxypool2??
should be enough to the auto switch?
December 11, 2017, 10:51:52 PM
By the way, I hate the way Microsoft updates production machines while they are working. Next, I hate that afterburner doesn't necessarily restart the fan settings. Sigh...
That's why you don't use Windows on mining rigs.
I have 8 GPUs on my Windows 10 rig, I just turn off the miner for the primary 1080ti, and turn on whatever game I want. Right now its Destiny 2.
Thing is rock solid cause I do minimal overclocking, and have plenty of PSU power spare for loading up the CPU if needed. People crack up when they see me jumping between gaming and mining like its nothing.
I do need to disable all of the automatic updates. Damn fall creative update cost me 30$ in lost mining, plus hours of my time fixing drivers and settings.
I tried the whole linux thing, and I couldnt get it to boot
December 11, 2017, 10:35:07 PM
Quote
Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power and profit (according to my calculations).
You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).
Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.
The miner I use is best for algo lyra2z not for -a lyra2re2 I do mine Zcoin which uses lyra2z. I use 23.21.13.8859 from 05/12/2017 NVIDIA driver already now (as you suggested) but don't see any major difference in hashrate in compare to NVIDIA driver version 23.21.13.8843 from 27/11/2017
December 11, 2017, 09:52:27 PM
Mining BTG for an hour, still no sign of earnings? It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far. Nothing unconfirmed, nothing at all. Is this normal for Bitcoin Gold?
Yes, completely normal, as long as ur hashrate is showing accurately you'll get ur btg.it took me 6 hours once to update. Don't worry about it
December 11, 2017, 09:51:02 PM
Mining BTG for an hour, still no sign of earnings? It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far. Nothing unconfirmed, nothing at all. Is this normal for Bitcoin Gold?
Jump to: