Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 160. (Read 487800 times)

+1
ETH: Received error: {"id":10,"result":null,"error":[21,"jobnotfound"]}

ETC and Music

restart = ok

I will test it if a worker is going into that failed state again, currently all running

Hi, just started using the multipoolminer by aaronsace with my 2 gtx1070 and it works great so far. Still waiting to see the profits compared to mining a single coin, but I am hopeful.
Is this the best miner for multipool mining?
Is there any way to monitor the current mining besides using remote desktop?

1) Maybe extending your Virtual memory size would help?
2) Have you tried it on other ETC pool?

Did not help, it is nothing with the fee, because error comes on the first share. Also it looks like not all worker having this trouble.
Yesterday it helped me as I deleted the Worker on miningpool under Hub Workers

here the same error
https://www.reddit.com/r/EtherMining/comments/7g4kk7/constantly_hitting_this_errorplease_help/


Edit: I rebooted the miner computer, after it all normal

Edit2: Finally it did not help, a worker switched again into the state jobnotfound, only computer reboot helps here again, I don't know whats the error

I'm still not sure at this moment.... but....

I think that this is problem related to DAG size increase from ETC.
ETC block 4924220 jumped to next DAG few hours ago.
http://gastracker.io/block/4924220


ETC dag increases faster than ETH so their limit will come faster.
So it may caused some problem on maintaining two DAG from claymore. (It uses two DAG for main mining and devfee mining)

I would recommend you to restart the miner.
If it doesn't help, check if it works if -nofee 1 and --allcoins 0 option

Or maybe try other ETC pool from your hardware and tell me the result. I don't see similar error from my gpu, so I don't know what the problem is.

You're welcome 





Thanks. 





I have no idea about ccminer and lyra2 related algo hashrates.
If you look at the dashboard, you would see high invalid share rate sometimes.
Shares are coming to server quite lately. Which means those were valid from miner but came late on server and judged as invalid.

The problem is that it depends on miner gpu.
AMD sgminers don't suffer this problem. Some NVIDIA ccminer users also works well.
I don't know what things are making this difference.






BTG needs confirmation time.
I found that you successfully withdrew your 0.08816222 BTG.






change worker.name as your actual username.workername.
e.g.) hello.rig1

17007 will work as you stated.






It would be possible if bittrex lists electroneum too.
Currently miningpoolhub doesn't support cryptopia.










I'm still not sure at this moment.... but....

I think that this is problem related to DAG size increase from ETC.
ETC block 4924220 jumped to next DAG few hours ago.
http://gastracker.io/block/4924220


ETC dag increases faster than ETH so their limit will come faster.
So it may caused some problem on maintaining two DAG from claymore. (It uses two DAG for main mining and devfee mining)

I would recommend you to restart the miner.
If it doesn't help, check if it works if -nofee 1 and --allcoins 0 option








I think current main homepage is complex enough that newbie miners don't even want to come.
I'll consider it anyway.

Thank you for suggestion.

Getting the same errors today on my miners. New issue has never happened tried a few things that seemed to help for a bit but always seem to get back into the rut of stale shares. This is not a network issue the latency between my miners and the pool is sub 50 ms.

I am new to mining can a reset clock setting in MSI after burner? I can mine every other algo fine so i hope it is not hardware. do i need core clock for neo? maybe +180 core is too much

Overclocking or faulty hardware. Reset the clock settings; to be safe, you can try increasing the fan speeds and capping the power usage.

How do they get corrupted? I mean i did mine 100 FTC or so with the same miner
How do i stop them from being calculated wrong.

Nearly always corruption; your shares are rejected because they are calculated wrong.

Hi All

I was wondering if anyone having a similar problem with MPH and Feathercoin
My problem is after a few mins to a few hours of mining MPH stops excepting shares. miner will run all night just no shares excepted
I've lost 8 hours mining last week and 8 hours mining last night on 6 x 1070 rig. Using ccminer 8.12-cuda8-x64, TDP 80, +180 core, 550 mem, getting 1.1MH/s per card. too much over clock maybe? I wouldn't think so.

any help would be appreciated.

Deleting the Worker in the Hub Overview helped, but now the error comes slowly back on the first worker again

ETH: 11/29/17-03:17:50 - SHARE FOUND - (GPU 3)
ETH: Received error: {"id":4,"result":null,"error":[21,"jobnotfound"]}

don't know if the hub send job twice, maby internal problems with ids ?

Eidt:  ETC via ethash 17020 port

Try this

delete the workers on the Hub Worker overview, restart the Miner, the error is gone, I made this, worked

I can confirm the same. ETC via ethash 17020 port report all shares error. Hasrate dropped to zero.
Eth port 20535 works fine.

To MPH Admin

one item to request, on the dashboard page for the coins, can you add a % which would be the pool hashrate as a percentage of the net hashrate.

I always like that as I look at when it might be a good time to switch coins.

Getting the same on ETC

ETH: 11/29/17-00:50:48 - SHARE FOUND - (GPU 4)
ETH: Received error: {"id":14,"result":null,"error":[21,"jobnotfound"]}
ETH: 11/29/17-00:50:57 - SHARE FOUND - (GPU 2)
ETH: Received error: {"id":12,"result":null,"error":[21,"jobnotfound"]}
ETH: 11/29/17-00:50:57 - SHARE FOUND - (GPU 0)
ETH: Received error: {"id":10,"result":null,"error":[21,"jobnotfound"]}

on the most shares, whats wrong ?

Also calculated Hashrate on the dashboard dropped by 80%

Seems the pool don't accept the shares :/

Checked Worker Page, 3 Worker working normal all other are makred as offline and all have the same error, jobnotfound

Edit: I deleted now the workers on the Hub Worker overview, restarted the Miner, the error is gone, perhaps this helps

Nothing was found; you have just given your money away to NiceHash.

That's how NiceHash works; no risk for miners, no risk for NiceHash, all the risk for the buyer.

If you could make money then NiceHash would buy their own hash; instead they profit from buyers bad luck.

Does the owner of the pool can see please ? Where went my money?