[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 161.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: DrX on November 28, 2017, 04:10:23 PM

Started getting this error today

while mining with claymore dual miner 10.

ETH: Received error: {"id":4,"result":null,"error":[21,"jobnotfound"]}

Problems with pool? or what is that error? Tested both ports 17020 (ETC) and 20535 (ETH).

Program looks like it is mining perfectly besides that error but pool shows no hash or worker?

Hashrate is fine but I confirm that the error message sometimes appears:

Code:

╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.1 ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:17020
LBC: 1 pool is specified
Main LBRY pool is lbry.mine.zpool.ca:3334
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 1
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
POOL/SOLO version
GPU #0: algorithm ASM
Total cards: 1
ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <178.79.168.110> port 17020
DUAL MINING MODE ENABLED: ETHEREUM+LBRY
ETH: nicehash stratum mode
LBC: Stratum - connecting to 'lbry.mine.zpool.ca' <149.56.122.79> port 3334
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management is enabled on port 13333

ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:17020)
LBC: Stratum - Connected (lbry.mine.zpool.ca:3334)
LBC: Authorized
ETH: Authorized
Setting DAG epoch #164...
Setting DAG epoch #164 for GPU0
Create GPU buffer for GPU0
ETH: 11/28/17-21:19:04 - New job from europe.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
LBC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
LBC: GPU0 0.000 Mh/s
GPU0 DAG creation time - 5871 ms
Setting DAG epoch #164 for GPU0 done
LBC: 11/28/17-21:19:21 - New job from lbry.mine.zpool.ca:3334
GPU0 t=64C fan=59%
ETH: 11/28/17-21:19:22 - New job from europe.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 24.027 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 24.027 Mh/s
LBC - Total Speed: 84.094 Mh/s, Total Shares: 0, Rejected: 0
LBC: GPU0 84.094 Mh/s
LBC: 11/28/17-21:19:23 - New job from lbry.mine.zpool.ca:3334
ETH: 11/28/17-21:19:30 - SHARE FOUND - (GPU 0)
ETH: Received error: {"id":10,"result":null,"error":[21,"jobnotfound"]}
ETH: 11/28/17-21:19:39 - New job from europe.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 24.158 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 24.158 Mh/s
LBC - Total Speed: 84.553 Mh/s, Total Shares: 0, Rejected: 0
LBC: GPU0 84.553 Mh/s
LBC: 11/28/17-21:19:49 - New job from lbry.mine.zpool.ca:3334
GPU0 t=64C fan=59%

DrX

member

Activity: 233

Merit: 20

Started getting this error today

while mining with claymore dual miner 10.

ETH: Received error: {"id":4,"result":null,"error":[21,"jobnotfound"]}

Problems with pool? or what is that error? Tested both ports 17020 (ETC) and 20535 (ETH).

Program looks like it is mining perfectly besides that error but pool shows no hash or worker?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: ozoner99 on November 28, 2017, 02:20:21 PM

Quote from: MegoBasha on November 28, 2017, 11:37:55 AM

My etc balance is not updating and the dashboard is showing 0 hash
is there a problem or is it because of me?
thanks

I am seeing this too. My hashrate is showing as 0 and I haven't had any credit applied for the last 5 hours or so.

It will just be a front end issue that won't effect your earnings.

If your miner is getting shares accepted then it's fine.

ozoner99

newbie

Activity: 19

Merit: 1

Quote from: MegoBasha on November 28, 2017, 11:37:55 AM

My etc balance is not updating and the dashboard is showing 0 hash
is there a problem or is it because of me?
thanks

I am seeing this too. My hashrate is showing as 0 and I haven't had any credit applied for the last 5 hours or so.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: ?? on ??

Hi guys, new D3 owner here and I've been mining with Nicehash but want to try something different. Sorry if this has been answered before but I have searched the forum, google, YouTube and haven't found a solution. I have attempted to setup my D3 according to the instructions but get nothing but dead status on mph pool.
Here is my configuration. What is wrong?

URL stratum+tcp://hub.miningpoolhub.com:20465
worker.name 172830.1
password x

I want to try mining Dash directly then try to autoswitch X11 coins. If I understand correctly I need to change the port to 17007?

Any help is really appreciated.
Thanks!

It's port 17007 but there are only 3 coins. You will get better profit than both NiceHash and MiningPoolHub by using Zpool:
URL: x11.mine.zpool.ca:3533#xnsub
Worker: [BTC Wallet]
Password: c=BTC,d=40

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: zeky on November 28, 2017, 11:46:54 AM

Hi,

I'm wondering what are the fees if I'm using auto exchange to BTC? Does it make sense to do it in BTC or should I choose ETH for example?

If you mainly mine Ethereum then you could auto-exchange everything to Ethereum then withdraw as Ethereum. Otherwise just auto-exchange it all to Bitcoin then withdraw.

The pool exchange fee is cheap:
"Additional 0.2% Fee is applied. (Txfee for sending from Mining Pool Hub to exchange site is included in this fee)"

The withdraw fees are set amounts so it's better value to accumulate just one coin:
0.0003BTC
0.0005ETH

zeky

newbie

Activity: 4

Merit: 0

Hi,

I'm wondering what are the fees if I'm using auto exchange to BTC? Does it make sense to do it in BTC or should I choose ETH for example?

MegoBasha

newbie

Activity: 65

Merit: 0

My etc balance is not updating and the dashboard is showing 0 hash
is there a problem or is it because of me?
thanks

agismaniax

newbie

Activity: 49

Merit: 0

I wonder if there is eletroneum, then it can be algo switch mining with monero.

fynxgloire

full member

Activity: 294

Merit: 100

Anyone know any other pool where I can mine using the Lyra2z algorithm?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: fynxgloire on November 28, 2017, 08:55:00 AM

Quote from: aaronsace on November 28, 2017, 07:55:40 AM

Quote from: fynxgloire on November 28, 2017, 07:20:45 AM

Quote from: aaronsace on November 28, 2017, 07:12:16 AM

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

What miner are you using?

I am using the new ccminer from djm here:
https://github.com/djm34/ccminer-msvc2015/releases/

reporting hashrate: https://imgur.com/a/5okQc

Actual hashrate: https://imgur.com/a/YUDya

Why am I losing 1/2 my hashrate?

Look at the daily graphs on MiningPoolHub instead as the pool estimates the speed from share submissions.

That's the best miner; they fixed the share submission problem but there is still a problem with what it's reporting.

Your shares are being sent to the pool but the miner is calculating something wrong.
Sgminer works fine so you need to keep reporting the bug to DJM34 regarding Ccminer.

Ok here is the graph of the 1080:
https://imgur.com/a/RWYs5

It seems to be consistently under 1500, Never goes above it.
So your saying the miner is showing a wrong figure of 2000?

It appears so because Sgminer is correct but neither MiningPoolHub or DJM34 knows what's wrong.

fynxgloire

full member

Activity: 294

Merit: 100

Quote from: aaronsace on November 28, 2017, 07:55:40 AM

Quote from: fynxgloire on November 28, 2017, 07:20:45 AM

Quote from: aaronsace on November 28, 2017, 07:12:16 AM

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

What miner are you using?

I am using the new ccminer from djm here:
https://github.com/djm34/ccminer-msvc2015/releases/

reporting hashrate: https://imgur.com/a/5okQc

Actual hashrate: https://imgur.com/a/YUDya

Why am I losing 1/2 my hashrate?

Look at the daily graphs on MiningPoolHub instead as the pool estimates the speed from share submissions.

That's the best miner; they fixed the share submission problem but there is still a problem with what it's reporting.

Your shares are being sent to the pool but the miner is calculating something wrong.
Sgminer works fine so you need to keep reporting the bug to DJM34 regarding Ccminer.

Ok here is the graph of the 1080:
https://imgur.com/a/RWYs5

It seems to be consistently under 1500, Never goes above it.
So your saying the miner is showing a wrong figure of 2000?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: fynxgloire on November 28, 2017, 07:20:45 AM

Quote from: aaronsace on November 28, 2017, 07:12:16 AM

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

What miner are you using?

I am using the new ccminer from djm here:
https://github.com/djm34/ccminer-msvc2015/releases/

reporting hashrate: https://imgur.com/a/5okQc

Actual hashrate: https://imgur.com/a/YUDya

Why am I losing 1/2 my hashrate?

Look at the daily graphs on MiningPoolHub instead as the pool estimates the speed from share submissions.

That's the best miner; they fixed the share submission problem but there is still a problem with what it's reporting.

Your shares are being sent to the pool but the miner is calculating something wrong.
Sgminer works fine so you need to keep reporting the bug to DJM34 regarding Ccminer.

fynxgloire

full member

Activity: 294

Merit: 100

Quote from: aaronsace on November 28, 2017, 07:12:16 AM

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

What miner are you using?

I am using the new ccminer from djm here:
https://github.com/djm34/ccminer-msvc2015/releases/

reporting hashrate: https://imgur.com/a/5okQc

Actual hashrate: https://imgur.com/a/YUDya

Why am I losing 1/2 my hashrate?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

What miner are you using?

Myth888

full member

Activity: 343

Merit: 102

Quote from: fynxgloire on November 28, 2017, 04:40:55 AM

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

Have you checked the graph page and see if avg is actually close to your hash rate?

brunocrypto

jr. member

Activity: 138

Merit: 2

Globalcurrency -100% backed by gold

Hello there.

I ve been rented a Nicehash 0,5 to 1m equihash power this night on the BTG block 502071 for about a 40 to 50 minutes.
on europe.equihash-hub.miningpoolhub.com:20595

All hashrate was detected on your Miningpoolhub dashboard, and estimate block reward was looking correct, then i got sleep.

Then this morning, i look, and absolutly no reward. Where is my share parts work rewards are ? (0.0000 unconfirmed, and no transaction ?)

as it's look non regular to me, i ve stop my rig mining on Miningpoolhub, till get an answers

login : brunocrypto.nicehash

Thanks
Bruno

fynxgloire

full member

Activity: 294

Merit: 100

Hi,
I have mining almost a week now but I see the reported hashrates on the website for the zcoin that I am mining is really off.
It is reporting for one of my workers that I have 6 MH/s when in fact I am mining at 12.

Why is it displaying 1/2 my hashing rate?

Sure a few hours it goes up to 10 or whatnot, WHY THE INCONSISTENCY?

What the hell are you doing? Throttling data?

Myth888

full member

Activity: 343

Merit: 102

.

Quote from: MiCoSa on November 27, 2017, 03:27:17 PM

I told that already. But it seems noone understands the problem. It‘s a pitty. I would really like to add my X10‘s to that pool. But with that fault, it is waisting a lot of money...

I thought that Baikal X10 performance to be same for every algo as previous baikal ASIC.

I didn't receive any message about skein algo hashrate difference.
Maybe I missed some message.. Sorry about that.
Anyway I fixed its numbers now. Hope you like it.

Like I said just provide the complete details. MPH actually listens well to miners. If it is helpful he will adjust. Just be patient. Running an almost solo operation is tough.

It will save him some time if you provide complete details. Let's him adjust right away without checking for details.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 161. (Read 487870 times)