Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 203. (Read 487870 times)
August 16, 2017, 06:36:42 AM
I'm going to add NiceHash API/Pool tonight to MultiPoolMiner unless someone does a pull request on GitHub before then.
August 16, 2017, 06:15:23 AM
Zpool works fine.
Does NiceHash work fine too?
oh yeah.. I was asking about MiningPoolHub and MiningPoolHubCoin.
All Auto switch pools works fine, Nicahash, Hashrefinery, yiimp,Zpool, ...
Only MPH has a 30 minute delay on updating its api.
August 16, 2017, 01:45:21 AM
Zpool works fine.
Does NiceHash work fine too?
oh yeah.. I was asking about MiningPoolHub and MiningPoolHubCoin.
August 16, 2017, 12:48:59 AM
Zpool works fine.
August 15, 2017, 10:54:07 PM
There is some thing wrong with pool auto switch api...
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Definitely should be 3 minutes, found the post where I remember him saying:
How often does the pool update these statistics?
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
3 minutes. it can be little bit delayed.
http://www.zpool.ca/api/status is still updating regularly.
so... should making the default pool MiningPoolHubCoins take are of that? or does the problem exist with both?
August 15, 2017, 08:58:56 AM
There is some thing wrong with pool auto switch api...
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Definitely should be 3 minutes, found the post where I remember him saying:
How often does the pool update these statistics?
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
3 minutes. it can be little bit delayed.
http://www.zpool.ca/api/status is still updating regularly.
How to disable MiningPoolHub and only mine at Zpool with your MultiPoolMiner ?
August 15, 2017, 08:12:42 AM
Seems like no one cares at miningpoolhub,
I sent email and NO Answer
I sent email and NO Answer
August 15, 2017, 05:56:59 AM
There is some thing wrong with pool auto switch api...
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no one care to fix it or at least gives some news to users about i
Definitely should be 3 minutes, found the post where I remember him saying:
How often does the pool update these statistics?
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
3 minutes. it can be little bit delayed.
http://www.zpool.ca/api/status is still updating regularly.
August 15, 2017, 05:52:24 AM
There is some thing wrong with pool ratings api...
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no noe care to fix it or at least gives some news to users about it
Takes long time to update and the 2 links has different rates
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
its been over 2 days that its like this and no noe care to fix it or at least gives some news to users about it
August 15, 2017, 01:58:07 AM
@aaronsace
Hi, I need help with MPM switch, seems like something is not right.
I have been using MPM for the last week
I feel like its not getting what it can/show in mining from MPH.
So ... here is my setup.
2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75)
MPM sync time 600 (was 300 for 3 days)
coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday)
MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM
which makes 2.3$ a day/card at least
What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card:
So ...
Any idea what I need to do to get it to optimum ?
P.S. You seen some of my logs in github.
Hi, I need help with MPM switch, seems like something is not right.
I have been using MPM for the last week
I feel like its not getting what it can/show in mining from MPH.
So ... here is my setup.
2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75)
MPM sync time 600 (was 300 for 3 days)
coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday)
MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM
which makes 2.3$ a day/card at least
What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card:
Code:
2017-08-15 (UTC) 0.00118331 BTC
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
So ...
Any idea what I need to do to get it to optimum ?
P.S. You seen some of my logs in github.
Please post to GitHub if you think there is an issue with MultiPoolMiner.
August 15, 2017, 01:50:53 AM
@aaronsace
Hi, I need help with MPM switch, seems like something is not right.
I have been using MPM for the last week
I feel like its not getting what it can/show in mining from MPH.
So ... here is my setup.
2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75)
MPM sync time 600 (was 300 for past week , changed to 600 last night)
coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday)
MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM
which makes 2.3$ a day/card at least
What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card:
So ...
Any idea what I need to do to get it to optimum ?
P.S. You seen some of my logs in github.
Hi, I need help with MPM switch, seems like something is not right.
I have been using MPM for the last week
I feel like its not getting what it can/show in mining from MPH.
So ... here is my setup.
2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75)
MPM sync time 600 (was 300 for past week , changed to 600 last night)
coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday)
MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM
which makes 2.3$ a day/card at least
What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card:
Code:
2017-08-15 (UTC) 0.00118331 BTC
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
So ...
Any idea what I need to do to get it to optimum ?
P.S. You seen some of my logs in github.
August 15, 2017, 01:01:08 AM
It seems static difficulty for myr-gr is not working.
Pool been reporting lower hash rate than my actual hash rate over 24 hours....
Yes, Pool been reporting lower hash rate than my actual hash rate over 24 hours....
its been like that for over 2 days
Pool stats gets updated longer than before, dont know if its intentional or bug
read some earlier posts started by me and answered by aaronsace
August 14, 2017, 08:05:27 PM
I got multipoolminer up and running and am starting to get coins in. I haven't set up an auto exchanges yet. Is it possible to auto exchange some coins but not others?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
If you click on the auto_exchange in the left side menu, it will open the auto_exchange page. Then you can activate/deactivate each coin individually from that page by using the sliders, don't forget to click 'update settings'
August 14, 2017, 07:37:08 PM
I got multipoolminer up and running and am starting to get coins in. I haven't set up an auto exchanges yet. Is it possible to auto exchange some coins but not others?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
August 14, 2017, 06:11:06 PM
It seems static difficulty for myr-gr is not working.
Pool been reporting lower hash rate than my actual hash rate over 24 hours....
Pool been reporting lower hash rate than my actual hash rate over 24 hours....
August 14, 2017, 03:33:17 PM
Guys... your sexcoin pool is on a forked chain. Could someone look into this?
August 13, 2017, 04:19:44 PM
Mining Pool Hub support extranonce ?
August 13, 2017, 09:37:43 AM
Is there a problem on MPH or is there a problem on MPM ?
btc/GH/Day values hasnt changed for over 8 hours ...
MPM is mining same coin for 8 hour with no switch....
Any one else noticed this or its just my problem ?
btc/GH/Day values hasnt changed for over 8 hours ...
MPM is mining same coin for 8 hour with no switch....
Any one else noticed this or its just my problem ?
The stats are frozen on MiningPoolHub:
https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
@MiningPoolHub What's happened???
Edit:
Seems to be updating now but it's definitely only every 30 minutes.
Last time I recall the stats updated about every 3 minutes but that was like before Christmas, have things changed?
I've now checked my mining rig but I use this one instead on mine and doesn't seem to be effected:
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
August 13, 2017, 06:38:05 AM
Is there a problem on MPH or is there a problem on MPM ?
btc/GH/Day values hasnt changed for over 8 hours ...
MPM is mining same coin for 8 hour with no switch....
Any one else noticed this or its just my problem ?
btc/GH/Day values hasnt changed for over 8 hours ...
MPM is mining same coin for 8 hour with no switch....
Any one else noticed this or its just my problem ?
August 13, 2017, 04:18:15 AM
Newbee on MPH ...
What does the Hub Worker Configuration do ?
I'm using Multi Pool Miner, Do I need to set the default job for my hub workers ?
What does the Hub Worker Configuration do ?
I'm using Multi Pool Miner, Do I need to set the default job for my hub workers ?
The hub uses the 12xxx ports; it has no effect on MultiPoolMiner as it does not use those ports. Just enter your username and wallet in the 'start.bat' file and your done.
Jump to: