Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 199. (Read 487870 times)
August 31, 2017, 06:45:59 AM
why does exchange to eth take so long time? i have since yesterday coins ready but nothing happens
August 29, 2017, 05:12:53 PM
i like this pool. its nice for me. but sometimes little bit different calculate. but everything its good.
August 29, 2017, 04:13:05 PM
To MPH Admin
I've been using the 12xxx ports with a custom batch file to rotate through the most profitable algos when a port disconnects, a lot like what you have on the site.
I notice the ports are not disconnecting as the profit list changes.
for example, Groestl is top of the list now, and i'm mining zCash.
what's the criteria for the auto-switch to kick in?
I've been using the 12xxx ports with a custom batch file to rotate through the most profitable algos when a port disconnects, a lot like what you have on the site.
I notice the ports are not disconnecting as the profit list changes.
for example, Groestl is top of the list now, and i'm mining zCash.
what's the criteria for the auto-switch to kick in?
August 29, 2017, 11:41:38 AM
Admin, miningpoolhub. Any plans to add more scrypt coins? I'd really like to point a couple L3+'s that way, but the coins you have are less than nicehash will buy from me 
August 28, 2017, 02:44:33 PM
This may or may not answer your question, but payout also depends on actually finding blocks. Yesterday was a bad day for that as it took about 130% of expected time to find monero blocks, so your payout would be about 30% less than expected. Luck is important but it all averages out in the end.
Hi.
Admin miningpoolhub, look at that for the problem.
USER ID 109050
Why is today produced much less XMR and this despite the fact that the complexity has decreased
C 9.4 KH / s only shows = Last 24 Hours 0.14251491? Must be at least 0.21 XMR! what happened to the difference?
Admin miningpoolhub, look at that for the problem.
USER ID 109050
Why is today produced much less XMR and this despite the fact that the complexity has decreased
C 9.4 KH / s only shows = Last 24 Hours 0.14251491
? Must be at least 0.21 XMR! what happened to the difference? August 28, 2017, 01:33:06 PM
Hi.
Admin miningpoolhub, look at that for the problem.
USER ID 109050
Why is today produced much less XMR and this despite the fact that the complexity has decreased
C 9.4 KH / s only shows = Last 24 Hours 0.14251491? Must be at least 0.21 XMR! what happened to the difference?
Admin miningpoolhub, look at that for the problem.
USER ID 109050
Why is today produced much less XMR and this despite the fact that the complexity has decreased
C 9.4 KH / s only shows = Last 24 Hours 0.14251491
? Must be at least 0.21 XMR! what happened to the difference? 
August 28, 2017, 12:47:46 PM
For Claymore Eth/Sia/DCR miner, what URL:PORT for ETH and SIA should be used?
As well as the connection method variable for Claymore; proxy, stratum, etc
As well as the connection method variable for Claymore; proxy, stratum, etc
Just an example but, this command line is dual mining Ethereum-Classic, using a direct port, and SIA, using an algo port.
Yours might need to be a little different.
Code:
EthDcrMiner64.exe -r -1 -epool us-east.ethash-hub.miningpoolhub.com:20555 -ewal-epsw x -esm 3 -allpools 1 -allcoins 1 -dpool hub.miningpoolhub.com:17022 -dwal -dpsw x -dcoin sc -dcri 40
August 28, 2017, 10:37:19 AM
Are there issues with the front end?
I am unable to login and view anything.
I can get to the login, but once I type in my credentials and click to login, it goes to a blank screen.
Tried another computer, same issue.
For Claymore Eth/Sia/DCR miner, what URL:PORT for ETH and SIA should be used?
As well as the connection method variable for Claymore; proxy, stratum, etc
I am unable to login and view anything.
I can get to the login, but once I type in my credentials and click to login, it goes to a blank screen.
Tried another computer, same issue.
For Claymore Eth/Sia/DCR miner, what URL:PORT for ETH and SIA should be used?
As well as the connection method variable for Claymore; proxy, stratum, etc
No issues at my end.
If you have been away for a longer period, your account may be locked for security reasons.
August 28, 2017, 07:17:41 AM
Are there issues with the front end?
I am unable to login and view anything.
I can get to the login, but once I type in my credentials and click to login, it goes to a blank screen.
Tried another computer, same issue.
For Claymore Eth/Sia/DCR miner, what URL:PORT for ETH and SIA should be used?
As well as the connection method variable for Claymore; proxy, stratum, etc
I am unable to login and view anything.
I can get to the login, but once I type in my credentials and click to login, it goes to a blank screen.
Tried another computer, same issue.
For Claymore Eth/Sia/DCR miner, what URL:PORT for ETH and SIA should be used?
As well as the connection method variable for Claymore; proxy, stratum, etc
August 28, 2017, 02:56:05 AM
User Id is 35954
The last transaction for BCC is 8068636
Still no autoexchange about one week
Now i can't autoexchange BCC to BTC, is it works?
Auto exchange is working well but BCC needs more amount for exchange.
Pool doesn't send little amount each time.
Sadly BCC is not mining pool, there's not much demands for auto exchange.
I recommend you to transfer that amount to normal credit wallet and withdraw, manually exchange to BTC.
If autoexchange working well but BCC needs more amount for exchange, you must define value of bitcoincash coin for autoexchange and specify this value as minimum for autoexchange and say it for us.
For example: "Bitcoincash autoexchange is working, but minimum value for autoexchange is 0,01...or 0,5 bitcoincash etc."
Minimum amount is not per account. It's calculated among all pool miner's requested amounts.
Currently BCC's minimum auto exchange amount is around 4.
Ahh...So no difference if i want to autoexchange 0,1 Bitcoincash or 3,9 bitcoincash if no autoexchange other miners request...
But if i have 0,02 bitcoincash and other miners make a 3,98 bitcoincash autoexchange request, autoexchange will ends successfully, right?
August 28, 2017, 01:48:02 AM
Hey mister Miningpoolhub,
Any chance for UBIQ and Decred in your to do list?
The last seven times this was asked, DCR is on his to do list and UBIQ was on his watch list.Any chance for UBIQ and Decred in your to do list?
That is exactly the point, we have been asking for new coins for so long (at least since May). I know issues have to be resolved but it feels like they will just keep coming and we will never get anything new and be missing out on so much.
Keep on asking people!
FYI
Any plans for adding LBRY?
On that note, any news on Decred?
[.......]
Please don't forget about Decred, Pascal and LBRY.
Please don't forget about Decred, Pascal and LBRY.
August 28, 2017, 01:38:52 AM
User Id is 35954
The last transaction for BCC is 8068636
Still no autoexchange about one week
Now i can't autoexchange BCC to BTC, is it works?
Auto exchange is working well but BCC needs more amount for exchange.
Pool doesn't send little amount each time.
Sadly BCC is not mining pool, there's not much demands for auto exchange.
I recommend you to transfer that amount to normal credit wallet and withdraw, manually exchange to BTC.
If autoexchange working well but BCC needs more amount for exchange, you must define value of bitcoincash coin for autoexchange and specify this value as minimum for autoexchange and say it for us.
For example: "Bitcoincash autoexchange is working, but minimum value for autoexchange is 0,01...or 0,5 bitcoincash etc."
Minimum amount is not per account. It's calculated among all pool miner's requested amounts.
Currently BCC's minimum auto exchange amount is around 4.
August 28, 2017, 01:35:33 AM
I'm trying to implement failover on AUTO SWITCHING for ethash algo using ethproxy by dwarfpool.
It doesn't seem to be working. Port 17020 does not support ethproxy? What port to use?
Thanks for miningpoolhub!
See my conf below:
It doesn't seem to be working. Port 17020 does not support ethproxy? What port to use?
Thanks for miningpoolhub!
See my conf below:
Code:
DEBUG = True
LOG_TO_FILE = False
MONITORING = False
COIN = "ETH"
HOST = "0.0.0.0"
PORT = 8080
WALLET = "0x0000000000000000000000000000000000000000"
ENABLE_WORKER_ID = True
POOL_HOST = "us-east.ethash-hub.miningpoolhub.com"
POOL_PORT = 17020
POOL_HOST_FAILOVER1 = "europe.ethash-hub.miningpoolhub.com"
POOL_PORT_FAILOVER1 = 17020
17020 is not compatible with dwarf's eth-proxy.
It's compatible with coinotron-proxy.
But I recommend you to not use eth-proxy. As it uses polling, it is about 9% inefficient. which mean you would lose hashrate and earnings about 9%.
August 28, 2017, 12:34:38 AM
User Id is 35954
The last transaction for BCC is 8068636
Still no autoexchange about one week
Now i can't autoexchange BCC to BTC, is it works?
Auto exchange is working well but BCC needs more amount for exchange.
Pool doesn't send little amount each time.
Sadly BCC is not mining pool, there's not much demands for auto exchange.
I recommend you to transfer that amount to normal credit wallet and withdraw, manually exchange to BTC.
If autoexchange working well but BCC needs more amount for exchange, you must define value of bitcoincash coin for autoexchange and specify this value as minimum for autoexchange and say it for us.
For example: "Bitcoincash autoexchange is working, but minimum value for autoexchange is 0,01...or 0,5 bitcoincash etc."
August 27, 2017, 11:31:38 PM
I'm trying to implement failover on AUTO SWITCHING for ethash algo using ethproxy by dwarfpool.
It doesn't seem to be working. Port 17020 does not support ethproxy? What port to use?
Thanks for miningpoolhub!
See my conf below:
It doesn't seem to be working. Port 17020 does not support ethproxy? What port to use?
Thanks for miningpoolhub!
See my conf below:
Code:
DEBUG = True
LOG_TO_FILE = False
MONITORING = False
COIN = "ETH"
HOST = "0.0.0.0"
PORT = 8080
WALLET = "0x0000000000000000000000000000000000000000"
ENABLE_WORKER_ID = True
POOL_HOST = "us-east.ethash-hub.miningpoolhub.com"
POOL_PORT = 17020
POOL_HOST_FAILOVER1 = "europe.ethash-hub.miningpoolhub.com"
POOL_PORT_FAILOVER1 = 17020
August 27, 2017, 10:37:58 PM
Hey mister Miningpoolhub,
Any chance for UBIQ and Decred in your to do list?
Any chance for UBIQ and Decred in your to do list?
Yeah I'll add those coins.
Sorry for late.
Lately, I fixed monero wallet issue, added 5 more servers around the world.
Now I have to fix some hashrate statistics updating performance issue and add some monero related underlying issue again.
I'm not playing around, but workload is high.
I transferred monero yesterday out from miningpoolhub to my wallet, my balance or unconfirmed balance still not show up in monero wallet! What the hell? I am 100% my address is correct.
My GUI wallet is 100% synced now and my monero i sent from miningpoolhub 12+ hours ago is STILL not showing up anywere. I double and triple checked address, its 100% correct.
Have you check that it is on the blockchain, if it is then it will turn up in your wallet - eventually.My GUI wallet is 100% synced now and my monero i sent from miningpoolhub 12+ hours ago is STILL not showing up anywere. I double and triple checked address, its 100% correct.
If it's on blockchain, then everything is fine. You should check your local wallet's sync. Maybe you are running old monero wallet?
Still not recieved monero into my fully synced gui wallet, 30 hours after withdrawal! I have to consider them lost, since they are not returned to my wallet balance at miningpoolhub either.
Ive double and tripled checked the address several times, and its the identical one on both miningpoolhub and my gui wallet.
conclusion is
DO NOT MINE MONERO ON THIS POOL!!!
Ive double and tripled checked the address several times, and its the identical one on both miningpoolhub and my gui wallet.
conclusion is
DO NOT MINE MONERO ON THIS POOL!!!
Let me know your account id.
If you inserted invalid address then I can resend you again. There's some miners who inputted wrong wallet addresses.
Hi MPH, Can you kindly add DCR and UBQ in the future. Thanks
Sure.
August 27, 2017, 10:27:51 PM
why does it say that monero is the most profitable when everywhere It is not. autoswitch it mining expanse when musiccoin is more profitable right now
It depends time to time. Miningpoolhub uses average hardware hashrate for calculation and applies overall block finding statistics to lower the difference from real mining and calculation.
Should we stop mining Cryptonight until resolved?
I'm thinking so if you can't exchange it.
Maybe you should shut down the port?
I'm thinking so if you can't exchange it.
Maybe you should shut down the port?
It's resolved.
Should we stop mining Cryptonight until resolved?
I'm thinking so if you can't exchange it.
Maybe you should shut down the port?
I'm thinking so if you can't exchange it.
Maybe you should shut down the port?
I'd hate to have to switch to another pool but if there is no word of when the Monero wallet problem is going to get resolved then it maybe time to switch to another pool; dev said he has asked for help in github so it's pretty much in the hands of someone else who may not be as helpful as MPH has always been.
I asked about issue to Monero dev because they know underlying logic better than me.
Monero works far different than any other cryptocurrencies.
Monero dev helped and things are resolved. It was not perfect solution but better than before.
Will it be possible to use cgnat ipv4 behind?
I don't understand what you are asking. Can you tell me what are you trying to do?
hope monero will be fixed soon? so i guess manual payout don't work ether
Yeah fixed.
User Id is 35954
The last transaction for BCC is 8068636
Still no autoexchange about one week
Now i can't autoexchange BCC to BTC, is it works?
Auto exchange is working well but BCC needs more amount for exchange.
Pool doesn't send little amount each time.
Sadly BCC is not mining pool, there's not much demands for auto exchange.
I recommend you to transfer that amount to normal credit wallet and withdraw, manually exchange to BTC.
When works Monero? I see on Gifthub the Problem was found!
It's resolved.
When works Monero? I see on Gifthub the Problem was found!
*****************************************************************************************
EDIT to below earlier post: The 'missing' Monero has just shown up as 'On Exchange' must have been some delay there.
*****************************************************************************************
The message on the MPH page says the Monero wallet is now fixed, but my Monero has vanished.
I set it to auto-exchange to Bitcoion, the Bitcoin amount does not increase but the Monero amount decreases.
The missing Monero is showing up as a the red amount in the transaction section.
Here is a screen shot of the transactions - where has my Monero gone ?
I hope the dev is not using Poloniex for the transactions as it has become very unreliable recently; a friend had $1000's stuck in limbo on Poloniex for over 3 weeks before the coins got transfered - many have been waiting much longer.
Edit: Here is what I had/have as shown on the Balances page (note the missing Monero and no increase in Bitcoin).
Coin Credited Credited for Auto Exchange On Exchange
26Aug17 13:40 hrs
Bitcoin 0.00439630
Monero 0 0.22775705 (0.00411867) 0
26Aug17 19:20 hrs
Bitcoin 0.00439630
Monero 0 0 (0.03382274) 0
I see most confirmed XMR coins are exchanged correctly now. There's some delay between real coin distribution and Balances page updates.
You can see exchanged coins at Bitcoin pool's Transactions page.
Let me know if you think something's wrong.
August 27, 2017, 10:05:42 PM
Hi MPH, Can you kindly add DCR and UBQ in the future. Thanks
August 27, 2017, 09:48:12 PM
Still not recieved monero into my fully synced gui wallet, 30 hours after withdrawal! I have to consider them lost, since they are not returned to my wallet balance at miningpoolhub either.
Ive double and tripled checked the address several times, and its the identical one on both miningpoolhub and my gui wallet.
Ive double and tripled checked the address several times, and its the identical one on both miningpoolhub and my gui wallet.
August 27, 2017, 07:22:45 PM
Start2gb.bat is for gpu's with 2gb of memory and did you change the username ? 
Jump to: