[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 290.

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: miningpoolhub on January 19, 2017, 07:54:11 AM

Quote from: rozsada on January 15, 2017, 09:09:57 AM

no result
100% notification does not work
my miner is still offline for half a day - no email. Sad

/xmr

Sorry for late reply.

Hmm...
Maybe in spam folder?
I've tested with it several times but worked well.

Can you leave your workername that didn't receive email?

Keep in mind that pool sends only one email per worker until that rig join to pool again.

i disable mine in December, i can confirm that the last few month the e-mail notification did not work correctly

in december i was getting mail from workers what did not work on the pool for couple of days, and when a miner was offline did not get the mail or a day or 2-3 after

before June or something like that it was working fine, got an e mail i less than 15 minutes

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: aaronsace on January 19, 2017, 04:00:33 AM

Quote from: alekki on January 19, 2017, 03:49:17 AM

Hi,
BTC/Day ~ 0.008 for 170Mh
Ok lets see how it goes today
Tnx for the reply, can we expect version 2.4 today?

PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard

Apologies about they delays. I noticed a bug so I'll have another go tonight.

The estimates change like every 5 minutes. I'm hoping that 24 hour actual figures are added at some point to MiningPoolHub.

Sorry for delays.
I have list of things to complete/improve currently. I'll do it one by one.

Thank you for your powershell project and efforts.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: Yanakitu Tenatako on January 18, 2017, 06:51:30 AM

What is wrong with monero payouts on pool?
on 18/janaury I got only 3.368 with hashrate over 70 khash/sec ?! It should be around 9 XMR, like days before.

There are two reasons.

(1) Monero pool is still small, rewards fluctuate time to time.
   block height 1226278 took more than 6 hours.
   https://monero.miningpoolhub.com/index.php?page=statistics&action=blocks&height=1226685&prev=1

   I see that last 24 hours, 7 days stats seems in normal range. So you get more some day, get less the other day.
It will be better when pool gets bigger.

(2) Reward calculation was stopped due to some little error which needed admin to check.
There was some delay for XMR credit too

Sorry for inconvenience.
Thanks.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: induktor on January 16, 2017, 01:14:22 PM

Quote from: avirdoz on January 16, 2017, 01:13:26 PM

Any ETA for adding LBRY?

+1
LBRY would be nice! is doing very good on NVIDIA GPUs right now

I'm afraid that I can't say specific ETA for now as I'm doing other coin pool work and I haven't even look into LBRY codes.
What I know is that LBRY is python based and it may need additional works to make it compatible with current pool environment.

Anyway I'll do works everyday, one by one.

Thanks.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: induktor on January 16, 2017, 12:45:20 PM

Hello Miningpoolhub

I have 17 x GTX 1070 mining zcash with you, last payment was 03 UTC, now at 17:40 UTC i have 0 zcash and 0 BTC exchanged and there as been no payments so far.

what is going on?, i am mining at a constant 6000 Sols, and blocks has been found, several of them in that time.

can you please investigate?, my username in that account is lightman
thank you
indkt.

Sorry for late reply.
I found that your zcash credits were correctly logged.

Auto exchange is delayed time to time. Sometimes pool withdraw them 4~6 hour interval but sometimes it takes more to reduce withdrawal fee.

Sorry for inconvenience. I'll monitor auto exchange flow more frequently.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: watson2316 on January 15, 2017, 03:53:54 PM

miningpoolhub,

would it be possible to implement a feature to set a percentage at which newly mined coins are auto-exchanged?
Example: Currenty when mining XMR and setting auto-exchange to BTC, all newly mined XMR will be exchanged to BTC. But what if I don't want all my XMR to be exchanged? Not possible. With this feature you could set e.g. auto-exchange 50%. That means, 50% of my mined coins will stay on my XMR wallet and the other 50% will be transferred to the auto-exchange wallet.
What do you think?

cheers

Great idea.
I'll implement that. It will satisfy other miners too who asked about turning off specific coin exchange.

Thanks.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: rozsada on January 15, 2017, 09:09:57 AM

no result
100% notification does not work
my miner is still offline for half a day - no email. Sad

/xmr

Sorry for late reply.

Hmm...
Maybe in spam folder?
I've tested with it several times but worked well.

Can you leave your workername that didn't receive email?

Keep in mind that pool sends only one email per worker until that rig join to pool again.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: alekki on January 19, 2017, 04:52:56 AM

My stats average 6 gpu rig rx480:
ETH: 170
Zec: 1600
XMR: 4500

Auto exchange is set to bitcoin.

Software screens:

Type: {AMD, NVIDIA}

Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Claymore Ethash 170 MH/s 0.00790 0.04665 MiningPoolHub

Type: AMD

Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Claymore Equihash 2 KH/s 0.00825 5,227.95492 MiningPoolHub <---- curent mining, giving most profit (auto switching ON)
Claymore Cryptonight 5 KH/s 0.00769 1,694.09777 MiningPoolHub

As I said before it's ~ 0.008 BTC by software

What I get from the pool is much less now.

That's the question could I estimate at least ~0.007-8 BTC with no downtimes

?

Did you actually run it for 24 hours or have you just opened it after being down for hours? I've fixed that bug in the new version as it giving to much weighting the first reading.

What does the 'MiningPoolHub_Equihash_Profit.txt' contain?
5,227 BTC/GH/Day sounds about right to me for a daily average but it will be static for a few hours if it is that bug.

You can calculate it yourself:
1.57 KH/s x 5,227 BTC/GH/Day = 0.00825 BTC
(I know it says 2 KH/s on the software because it's rounded; is fixed in the next version. )

alekki

newbie

Activity: 7

Merit: 0

My stats average 6 gpu rig rx480:
ETH: 170
Zec: 1600
XMR: 4500

Auto exchange is set to bitcoin.

Software screens:

Type: {AMD, NVIDIA}

Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Claymore Ethash 170 MH/s 0.00790 0.04665 MiningPoolHub

Type: AMD

Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Claymore Equihash 2 KH/s 0.00825 5,227.95492 MiningPoolHub <---- curent mining, giving most profit (auto switching ON)
Claymore Cryptonight 5 KH/s 0.00769 1,694.09777 MiningPoolHub

As I said before it's ~ 0.008 BTC by software

What I get from the pool is much less now.

That's the question could I estimate at least ~0.007-8 BTC with no downtimes

?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: alekki on January 19, 2017, 03:49:17 AM

Hi,
BTC/Day ~ 0.008 for 170Mh
Ok lets see how it goes today
Tnx for the reply, can we expect version 2.4 today?

PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard

Apologies about they delays. I noticed a bug so I'll have another go tonight.

The estimates change like every 5 minutes. I'm hoping that 24 hour actual figures are added at some point to MiningPoolHub.

alekki

newbie

Activity: 7

Merit: 0

Hi,
BTC/Day ~ 0.008 for 170Mh
Ok lets see how it goes today
Tnx for the reply, can we expect version 2.4 today?

PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: alekki on January 19, 2017, 03:29:45 AM

Hello.
New user on pool. Please confirm numbers (seems low a bit

ETH 170mh(6 gpu rig) - 0.42089892(4 eur) per 24h?

MultiPoolMiner shows ~0.008BTC(6.7 eur) per 24h

MultiPoolMiner is not accurate or pool issue?

Are you mixing up the BTC/Day and BTC/GH/Day? They don't match on your post.

The MultiPoolMiner figures are taken from the pool. MultiPoolMiner also makes use of 24 average but stable pools like Ethereum are mostly live.

Where are you getting the figures from as there are no 24 hour stats available?

alekki

newbie

Activity: 7

Merit: 0

Hello.
New user on pool. Please confirm numbers (seems low a bit

ETH 170mh(6 gpu rig) - 0.42089892(4 eur) per 24h?

MultiPoolMiner shows ~0.008BTC(6.7 eur) per 24h

MultiPoolMiner is not accurate or pool issue?

Yanakitu Tenatako

sr. member

Activity: 328

Merit: 250

What is wrong with monero payouts on pool?
on 18/janaury I got only 3.368 with hashrate over 70 khash/sec ?! It should be around 9 XMR, like days before.

carlo_0000

legendary

Activity: 1281

Merit: 1003

ouch i found the problem was something wrong with my username Roll Eyes

i notice miner doesn't change clock speed

905 MH/s 00:16 1 Time(s) Bin\Reorder\cgminer.exe --api-listen --skein -o stratum+ssl://europe1.digibyte-skein.miningpoolhub.com:20527 -u carlo0000.sapphire -p x -I 11 -g 2 -w 64 --gpu-engine 1048 --gpu-memclock 1400

but clock still running at 1020/1490

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: carlo_0000 on January 17, 2017, 07:16:55 PM

i was benchmarking on 2 computers but i have this

[01:12:49] Press any key to exit, or cgminer will try again in 15s.
[01:13:04] Pool 0 JSON stratum auth failed: (null)
[01:14:04] No servers were found that could be used to get work from.
[01:14:04] Please check the details from the list below of the servers you have
input
[01:14:04] Most likely you have input the wrong URL, forgotten to add a port, o
have not set up workers
[01:14:04] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17016 User
carlo_0000.rx-470x6 Password: x
[01:14:04] Press any key to exit, or cgminer will try again in 15s.
[01:14:19] Pool 0 JSON stratum auth failed: (null)

i notice it try connect with ssl? how to remove that ?

Is that the issue? You can edit 'reorder.txt' in the miners folder.
I don't appear to be getting that error message; although it may not support ssl, it doesn't break it.

BTW, I'll release v2.4 once the windows release of sgminer-gm 5.5.5 is available for download. They had some issues compiling.

carlo_0000

legendary

Activity: 1281

Merit: 1003

i was benchmarking on 2 computers but i have this

[01:12:49] Press any key to exit, or cgminer will try again in 15s.
[01:13:04] Pool 0 JSON stratum auth failed: (null)
[01:14:04] No servers were found that could be used to get work from.
[01:14:04] Please check the details from the list below of the servers you have
input
[01:14:04] Most likely you have input the wrong URL, forgotten to add a port, o
have not set up workers
[01:14:04] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17016 User
carlo_0000.rx-470x6 Password: x
[01:14:04] Press any key to exit, or cgminer will try again in 15s.
[01:14:19] Pool 0 JSON stratum auth failed: (null)

i notice it try connect with ssl? how to remove that ?

melloyellow

full member

Activity: 176

Merit: 100

Quote from: aaronsace on January 17, 2017, 06:13:36 PM

Quote from: melloyellow on January 17, 2017, 06:10:21 PM

Is there a way to 'delete' algos? E.g. I have no interest in mining scrypt or x11 coins. Will deleting the kernel files be sufficient?

I doubt they will be most profitable after benchmarking but you can edit the files in the 'miners' folder for any adjustments like deleting algorithms. There is no simple filter at the moment.

True, I was just trying to cut down on the benchmarking time. Also some of the lesser used algos crash my drivers and then I would have to restart the benchmarking process all over again.

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: melloyellow on January 17, 2017, 06:10:21 PM

Is there a way to 'delete' algos? E.g. I have no interest in mining scrypt or x11 coins. Will deleting the kernel files be sufficient?

I doubt they will be most profitable after benchmarking but you can edit the files in the 'miners' folder for any adjustments like deleting algorithms. There is no simple filter at the moment.

melloyellow

full member

Activity: 176

Merit: 100

Quote from: aaronsace on January 17, 2017, 11:38:25 AM

Quote from: DrX on January 17, 2017, 10:47:57 AM

Quote from: aaronsace on January 17, 2017, 03:06:24 AM

Quote from: DrX on January 17, 2017, 01:58:16 AM

Quote from: aaronsace on January 14, 2017, 04:10:52 PM

Quote from: DrX on January 14, 2017, 12:49:40 PM

Update was already installed.

Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.

It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.

Miner works well if i start it directly from the miner folder (Any of the Claymore miner).

There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.

I Did test that... zecminer windows pops up and computer crashes. The is nothing else than Claymore file in the miners folder.

Also is there a way to re-benchmark? If I add change gpu(s).

I will add zcash miner 11.1 when I finally upload MultiPoolMiner 2.4 as a release but you can update the zec miner manually in the bin folder if that helps. (Hopefully upload tonight after I check it's working correctly now; will mark as a pre-release though. )

It's dynamic enough to adjust to small changes in performance but if you add a whole graphics card then you'll want to delete the stats files.

Is there a way to 'delete' algos? E.g. I have no interest in mining scrypt or x11 coins. Will deleting the kernel files be sufficient?

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 290. (Read 487870 times)