If you can run one claymore miner on system, you should be able to configure right eg. claymore zcash miner without any problems, system do not need any updates.
Surely something in bat.
Just tested for last 12h claymore 11.1 on several different config. rigs -- stabil, more hash, working great like 99% always.
so -- just tested in mph and multipoolminer 11.1 -- of course, worked.
if in multipoolminer a miner will not work -it will also not work in single test! if you want use mph or multipoolminer, just delete the miners which do not work or you do not like
then all will be fine
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 291. (Read 487870 times)
January 17, 2017, 02:58:20 PM
January 17, 2017, 01:49:42 PM
to re-benchmark
just delete the file in stats folder
just delete the file in stats folder
January 17, 2017, 11:38:25 AM
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
Miner works well if i start it directly from the miner folder (Any of the Claymore miner).
There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.
I Did test that... zecminer windows pops up and computer crashes. The is nothing else than Claymore file in the miners folder.
Also is there a way to re-benchmark? If I add change gpu(s).
I will add zcash miner 11.1 when I finally upload MultiPoolMiner 2.4 as a release but you can update the zec miner manually in the bin folder if that helps. (Hopefully upload tonight after I check it's working correctly now; will mark as a pre-release though. )
It's dynamic enough to adjust to small changes in performance but if you add a whole graphics card then you'll want to delete the stats files.
January 17, 2017, 10:47:57 AM
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
Miner works well if i start it directly from the miner folder (Any of the Claymore miner).
There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.
I Did test that... zecminer windows pops up and computer crashes. The is nothing else than Claymore file in the miners folder.
Also is there a way to re-benchmark? If I add change gpu(s).
January 17, 2017, 03:06:24 AM
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
Miner works well if i start it directly from the miner folder (Any of the Claymore miner).
There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.
January 17, 2017, 01:58:16 AM
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
Miner works well if i start it directly from the miner folder (Any of the Claymore miner).
January 16, 2017, 01:14:22 PM
Any ETA for adding LBRY?
+1 LBRY would be nice! is doing very good on NVIDIA GPUs right now
January 16, 2017, 01:13:26 PM
Any ETA for adding LBRY?
January 16, 2017, 12:45:20 PM
Hello Miningpoolhub
I have 17 x GTX 1070 mining zcash with you, last payment was 03 UTC, now at 17:40 UTC i have 0 zcash and 0 BTC exchanged and there as been no payments so far.
what is going on?, i am mining at a constant 6000 Sols, and blocks has been found, several of them in that time.
can you please investigate?, my username in that account is lightman
thank you
indkt.
I have 17 x GTX 1070 mining zcash with you, last payment was 03 UTC, now at 17:40 UTC i have 0 zcash and 0 BTC exchanged and there as been no payments so far.
what is going on?, i am mining at a constant 6000 Sols, and blocks has been found, several of them in that time.
can you please investigate?, my username in that account is lightman
thank you
indkt.
January 15, 2017, 11:58:57 PM
happens for me also sometimes,
it was never the pool, something in software, most time a restart helps.
One time made a fresh install of system
it was never the pool, something in software, most time a restart helps.
One time made a fresh install of system
January 15, 2017, 05:49:30 PM
Hi,
i am mining with the nheqminer from nicehash and getting this:
[23:40:15][0x00007fb37d6db700] stratum | Target set to 0001caa093ad8fcf000000000000000000000000000000000000000000000000
[23:40:15][0x00007fb37d6db700] stratum | Ignoring non-clean job #11d8
[23:40:25][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:35][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:45][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:55][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:56][0x00007fb37d6db700] stratum | Ignoring non-clean job #11d9
[23:41:05][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:15][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:25][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:35][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:45][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:51][0x00007fb37d6db700] stratum | Target set to 00028f2e89d35fba000000000000000000000000000000000000000000000000
[23:41:51][0x00007fb37d6db700] stratum | Ignoring non-clean job #11da
[23:41:55][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:42:05][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:42:15][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
This is strange, because it worked in the last few days. I am using europe.equihash-hub.miningpoolhub.com:17023 and i suppose it was on the ZClassic-Pool.
i am mining with the nheqminer from nicehash and getting this:
[23:40:15][0x00007fb37d6db700] stratum | Target set to 0001caa093ad8fcf000000000000000000000000000000000000000000000000
[23:40:15][0x00007fb37d6db700] stratum | Ignoring non-clean job #11d8
[23:40:25][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:35][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:45][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:55][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:40:56][0x00007fb37d6db700] stratum | Ignoring non-clean job #11d9
[23:41:05][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:15][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:25][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:35][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:45][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:41:51][0x00007fb37d6db700] stratum | Target set to 00028f2e89d35fba000000000000000000000000000000000000000000000000
[23:41:51][0x00007fb37d6db700] stratum | Ignoring non-clean job #11da
[23:41:55][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:42:05][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
[23:42:15][0x00007fb37ff8b740] Speed [15 sec]: 0 I/s, 0 Sols/s
This is strange, because it worked in the last few days. I am using europe.equihash-hub.miningpoolhub.com:17023 and i suppose it was on the ZClassic-Pool.
January 15, 2017, 03:53:54 PM
miningpoolhub,
would it be possible to implement a feature to set a percentage at which newly mined coins are auto-exchanged?
Example: Currenty when mining XMR and setting auto-exchange to BTC, all newly mined XMR will be exchanged to BTC. But what if I don't want all my XMR to be exchanged? Not possible. With this feature you could set e.g. auto-exchange 50%. That means, 50% of my mined coins will stay on my XMR wallet and the other 50% will be transferred to the auto-exchange wallet.
What do you think?
cheers
would it be possible to implement a feature to set a percentage at which newly mined coins are auto-exchanged?
Example: Currenty when mining XMR and setting auto-exchange to BTC, all newly mined XMR will be exchanged to BTC. But what if I don't want all my XMR to be exchanged? Not possible. With this feature you could set e.g. auto-exchange 50%. That means, 50% of my mined coins will stay on my XMR wallet and the other 50% will be transferred to the auto-exchange wallet.
What do you think?
cheers
January 15, 2017, 09:09:57 AM
It seems that email notification does not work properly or the time of reaction is too high.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
What coin did you mine?
I'll check the email notification check interval. Sometimes email notification checking would be delayed because pool checks each coin pool one by one.
Maybe I would set shorter period for some coins if it's too late than expected.
OK. I've changed notification check interval for monero.
Thanks.
100% notification does not work
my miner is still offline for half a day - no email.
/xmr
January 14, 2017, 10:55:20 PM
It seems that email notification does not work properly or the time of reaction is too high.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
What coin did you mine?
I'll check the email notification check interval. Sometimes email notification checking would be delayed because pool checks each coin pool one by one.
Maybe I would set shorter period for some coins if it's too late than expected.
OK. I've changed notification check interval for monero.
Thanks.
January 14, 2017, 04:10:52 PM
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
January 14, 2017, 03:48:01 PM
It seems that email notification does not work properly or the time of reaction is too high.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
What coin did you mine?
I'll check the email notification check interval. Sometimes email notification checking would be delayed because pool checks each coin pool one by one.
Maybe I would set shorter period for some coins if it's too late than expected.
January 14, 2017, 12:49:40 PM
January 14, 2017, 08:07:03 AM
January 14, 2017, 07:50:57 AM
aaronsace,
I tryied multipoolminer last night, but too many problems/error to keep it going...
First it keeps asking me time to time
"Confirm
Are you sure you want to perform the Stop-Process operation on the following item: (2616)?
&Yes Yes to &All &No No to A&ll &Suspend"
and i get loads of different errors like ..
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server"
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep
tion
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc
eption
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server"
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep
tion
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc
eption
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "The request was aborted: Could not create SSL/TLS secure channel."
I Can start the script in windows 7 from start.bat but in 8.1 it doesn't work...althought in 8.1 it works directly from script.
PS. I did delete everything else but Claymore from Miners folder
I tryied multipoolminer last night, but too many problems/error to keep it going...
First it keeps asking me time to time
"Confirm
Are you sure you want to perform the Stop-Process operation on the following item: (2616)?
&Yes Yes to &All &No No to A&ll &Suspend"
and i get loads of different errors like ..
Code:
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server"
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep
tion
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc
eption
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server"
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep
tion
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
Invoke-WebRequest : Unable to connect to the remote server
At MultiPoolMinerV2\Include.ps1:202 char:24
+ ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc
eption
+ FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:203 char:13
+ $Data = ($Request.Content.Substring($Request.Content.Inde ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression.
At MultiPoolMinerV2\Include.ps1:204 char:16
+ if($Request.Content.Contains("ETH:"))
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Cannot index into a null array.
At MultiPoolMinerV2\Include.ps1:213 char:13
+ [Decimal]$Data[4].Split(";")[0]*$Multiplier
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "The request was aborted: Could not create SSL/TLS secure channel."
I Can start the script in windows 7 from start.bat but in 8.1 it doesn't work...althought in 8.1 it works directly from script.
PS. I did delete everything else but Claymore from Miners folder
January 14, 2017, 06:10:50 AM
It seems that email notification does not work properly or the time of reaction is too high.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
About 1 hour my miners were offline and there was no email.
By the way - suggest to make more flexible the Graphs opt. The scale is fixed=every 1 hour per only 1 day. It is impossible to detail speed for some selected hours nor to watch stats before current day.
What coin did you mine?
I'll check the email notification check interval. Sometimes email notification checking would be delayed because pool checks each coin pool one by one.
Maybe I would set shorter period for some coins if it's too late than expected.
I'll make Graphs much more better.
Hew.. lots of work to do
Jump to: