Please check the latest release of MultiPoolMiner:
https://github.com/aaronsace/MultiPoolMiner/releases
The bugs and features that people posted on GitHub have now been addressed.
Most notably the issue with pool and miner statistics that caused a multitude of problems.
As requested, you can now specify not to mine with CPU.
Bitcoin Donations: 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH
Note: Current users, be sure to download the latest release (version 2.2.3) as many issues have been addressed.
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 301. (Read 487870 times)
January 01, 2017, 05:25:19 PM
January 01, 2017, 05:18:34 PM
how do i set up command line and worker for auto switch for zcash and zclassic i have an idea but i want to make sure i do it correctly, plus i cant remember the port, thanks in advance love mining pool hub
i am using claymore and EWBF mining software
i am using claymore and EWBF mining software
You don't need to set anything. Just use port 17023 as listed on the main page.
January 01, 2017, 04:22:14 PM
how do i set up command line and worker for auto switch for zcash and zclassic i have an idea but i want to make sure i do it correctly, plus i cant remember the port, thanks in advance love mining pool hub
i am using claymore and EWBF mining software
i am using claymore and EWBF mining software
December 30, 2016, 09:51:01 PM
Siacoin Mining Pool Hub
Many of you would have not noticed, but there was some internal error at Siacoin pool.
I modified some source code for monero and it affected Siacoin pool logic a bit and couldn't find a block for two days.
Oh my bad. I didn't make bug like this before.
I compensated coins for this mistake.
84403 block found at 27/12 10:23:00 (UTC).
-- pool had internal problem this period and no block --
84801 block found at 30/12 16:50:50 (UTC).
Pool credited x8 of 84403, 84801 block's reward each.
Total, (block reward) x 16 are distributed to miners already.
x16 calculation is based on accumulated shares that are expected to find a block + some compensation bonus.
I gathered distribution info for each miner shares from 84403 and 84801 because it is the most fair method to distribute I could think of.
Thanks.
Many of you would have not noticed, but there was some internal error at Siacoin pool.
I modified some source code for monero and it affected Siacoin pool logic a bit and couldn't find a block for two days.
Oh my bad. I didn't make bug like this before.
I compensated coins for this mistake.
84403 block found at 27/12 10:23:00 (UTC).
-- pool had internal problem this period and no block --
84801 block found at 30/12 16:50:50 (UTC).
Pool credited x8 of 84403, 84801 block's reward each.
Total, (block reward) x 16 are distributed to miners already.
x16 calculation is based on accumulated shares that are expected to find a block + some compensation bonus.
I gathered distribution info for each miner shares from 84403 and 84801 because it is the most fair method to distribute I could think of.
Thanks.
December 30, 2016, 06:10:35 PM
could you guys let me no where you bought your baikal miners from I was looking but heard of a few sites that are a scam Thanks
i bought mine straight from baikalminer.com, contact has been done via skype
December 30, 2016, 06:04:38 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
Let me know if that helps.
i had the same problem some time back
for me my baikal miners were running the first multi-algo image (v2.1 orange pi image) and an upgrade to the v2.2 image fixed it (v2.2 is the image with nicehash, mph and zpool multi-algo switching officially supported)
might be worth a try if you are running v2.1
December 30, 2016, 06:00:33 PM
could you guys let me no where you bought your baikal miners from I was looking but heard of a few sites that are a scam Thanks
i bought mine straight from baikalminer.com, contact has been done via skype
December 30, 2016, 05:53:49 PM
could you guys let me no where you bought your baikal miners from I was looking but heard of a few sites that are a scam Thanks
i bought mine straight from baikalminer.com, contact has been done via skype
December 30, 2016, 05:50:54 PM
could you guys let me no where you bought your baikal miners from I was looking but heard of a few sites that are a scam Thanks
i bought mine straight from baikalminer.com, contact has been done via skype
December 30, 2016, 05:47:39 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
Let me know if that helps.
i had the same problem some time back
for me my baikal miners were running the first multi-algo image (v2.1 orange pi image) and an upgrade to the v2.2 image fixed it (v2.2 is the image with nicehash, mph and zpool multi-algo switching officially supported)
might be worth a try if you are running v2.1
December 30, 2016, 09:20:53 AM
Hm.... so what is the final difficulty level you got after several minutes?
I want to know the difficulty level when it is stabilized.
Actually monero is quite difficult to deal about difficulty value because there's no "set difficulty" command in monero's stratum protocol. I don't know who wrote this stratum protocol, just I couldn't find the appropriate command for it.
New difficulty is sent by every work job, and this job need to be sent rarely to not disturb already running job.
I would have to limit difficulty increase/decrease level.
I'll test more and find optimal solution.
Thanks.
stabilized diff is 5k, i believe it would go lower if the server would allow it (5k gives approx 2.4 shares per minute with 240H/s and 0.9 shares per minute with 80H/s)
Thank you for detailed info.
I fixed some issues that didn't start with last difficulty value and manual starting difficulty hint (d=XXX) option. It worked well before, but broken after I changed some other stuffs.
Also I lowered minimum difficulty value from 5000 to 2000. I hope you like it.
Thanks.
thanks working fine
have not tested d=xxx option as the last diff (2k) got picked up correctly after a 30 minute pause, thanks
December 30, 2016, 07:50:55 AM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
Server pool is restarted rarely time to time. Maybe this can affect for 1~5 minutes.
Today I restarted the pool few hours ago.
Also I would like to recommend you to upgrade your firmware if you didn't do it yet.
December 30, 2016, 07:45:50 AM
I have a problem with Monero. Yesterday I deposit approx 0.01557345 to nicehash. I put in all setting properly for miningpoolhub US-east1 server. At nicehash I use speed of 0.2 MH/S which give me about 1hr45mins of hashing power. I then check dashboard at miningpoolhub to make sure everything was ok. Everything looked fine, yesterday I was showing up as #2 in pool for hashing power, miningpoolhub recognize my worker from nicehash ok.
Problem is I never earned any Monero, not even in unconfirmed. As far as I know I did everything correctly, I have mined other coins in past with nicehash and miningpoolhub. All connections showed good yesterday when mining Monero. Can someone please explain? I hope I didn't lose $15usd worth of btc that I put into nicehash.
My user id 31942
Problem is I never earned any Monero, not even in unconfirmed. As far as I know I did everything correctly, I have mined other coins in past with nicehash and miningpoolhub. All connections showed good yesterday when mining Monero. Can someone please explain? I hope I didn't lose $15usd worth of btc that I put into nicehash.
My user id 31942
Sorry about that. You have to mine much much longer as pool size so small.
You would not get any credits if you stop mining before you find a block because pool calculates shares backward from the time block is found.
Some blocks took nearly 12 hours, your shares could be out of calculation scope.
I credited 0.015 BTC to your bitcoin account. You can fiind that with 'Bonus' filtering at Transactions page.
Please keep in mind that, this is not usual. I got nothing from your hash rental, only nicehash got profit from it.
I hope you mine longer. Monero pool's hashrate is still small and it's too fluctuating.
Thanks.
OK thank you so much for credit so it's not complete loss. So if I understand correctly you suggest to mine for longer? Even if I use big hashing power?
Thanks again
It is good to have big hashing power than small hashing power but it can't be guaranteed to find a block at that time period.
Mining longer makes things to happen closely to mathematical expectation.
You have to mine longer with this sized pool. You will get appropriate coins eventually.
December 30, 2016, 07:40:32 AM
Hm.... so what is the final difficulty level you got after several minutes?
I want to know the difficulty level when it is stabilized.
Actually monero is quite difficult to deal about difficulty value because there's no "set difficulty" command in monero's stratum protocol. I don't know who wrote this stratum protocol, just I couldn't find the appropriate command for it.
New difficulty is sent by every work job, and this job need to be sent rarely to not disturb already running job.
I would have to limit difficulty increase/decrease level.
I'll test more and find optimal solution.
Thanks.
stabilized diff is 5k, i believe it would go lower if the server would allow it (5k gives approx 2.4 shares per minute with 240H/s and 0.9 shares per minute with 80H/s)
Thank you for detailed info.
I fixed some issues that didn't start with last difficulty value and manual starting difficulty hint (d=XXX) option. It worked well before, but broken after I changed some other stuffs.
Also I lowered minimum difficulty value from 5000 to 2000. I hope you like it.
Thanks.
December 30, 2016, 04:10:01 AM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
Let me know if that helps.
i had the same problem some time back
for me my baikal miners were running the first multi-algo image (v2.1 orange pi image) and an upgrade to the v2.2 image fixed it (v2.2 is the image with nicehash, mph and zpool multi-algo switching officially supported)
might be worth a try if you are running v2.1
December 29, 2016, 11:11:08 PM
More miners have now been added to MultiPoolMiner.
The bugs and features that people posted on GitHub have also been addressed in V2.1.
https://github.com/aaronsace/MultiPoolMiner/releases
Bitcoin Donations: 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH
The bugs and features that people posted on GitHub have also been addressed in V2.1.
https://github.com/aaronsace/MultiPoolMiner/releases
Bitcoin Donations: 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH
December 29, 2016, 09:36:46 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
Let me know if that helps.
December 29, 2016, 09:32:24 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
December 29, 2016, 07:33:05 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
December 29, 2016, 07:19:47 PM
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
https://s29.postimg.org/lbgmaqznb/Baikal.jpg
No problems here... But I am only mining dash atm..
Jump to: