We have done http://miningpoolhub.com site UI renewal.
Some extra works are left but seems better than before.
Hope you miners like it.
Some extra works are left but seems better than before.
Hope you miners like it.
I love it! Thanks!!
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 358. (Read 487921 times)
April 30, 2015, 05:37:52 AM
I love it! Thanks!!
April 29, 2015, 08:50:37 AM
We have done http://miningpoolhub.com site UI renewal.
Some extra works are left but seems better than before.
Hope you miners like it.
Some extra works are left but seems better than before.
Hope you miners like it.
April 28, 2015, 12:23:21 AM
I think I need to write "Getting Started" page more in detail.
Thanks.
That would be a definite plus for those of us that are new to the site. I love the site but there are several features that are not intuitively obvious.
Thanks for your feedback.
We'll make it better.
April 27, 2015, 04:34:52 AM
I think I need to write "Getting Started" page more in detail.
Thanks.
That would be a definite plus for those of us that are new to the site. I love the site but there are several features that are not intuitively obvious.
April 26, 2015, 11:37:38 PM
Hmm.. I've been mining Scrypt on another pool. When I saw your announcement I tried to switch over to mine my Scrypt on your site. But no matter what I try to set on MMR I get "unable to authenticate. Do you wish to add anyway?" Is there a problem with Scrypt? I've tried pointing directly at a coin as well as using the "Hub" feature. Please advise.
Correction: I can mine an individual Scrypt coin fine. It seems that I'm having issues with the "Hub" port 12001
Correction #2: Let me make sure I understand how to use the "Hub". I've clicked on "Hub". Under "My Workers" I create a new worker. "Worker Login"="Workername associated with my account" "Worker Password"="x" "Coin"="The coin I wish to be paid in" and for Scrypt I would point to port 12001.
So this would cause my mining rig to mine the most profitable coin at the moment and to be paid in DogeCoinDark" if I've set my "Coin" value to "DogeCoinDark"?
I just want to make sure I'm doing this right!
Correction #3: Ok I think I see what is going on. You don't set the "Coin" to a specific coin. You set it to the algorithm? And then you set the auto-payout to the coin you wish to be paid in? Am I on the right track?
Correction: I can mine an individual Scrypt coin fine. It seems that I'm having issues with the "Hub" port 12001
Correction #2: Let me make sure I understand how to use the "Hub". I've clicked on "Hub". Under "My Workers" I create a new worker. "Worker Login"="Workername associated with my account" "Worker Password"="x" "Coin"="The coin I wish to be paid in" and for Scrypt I would point to port 12001.
So this would cause my mining rig to mine the most profitable coin at the moment and to be paid in DogeCoinDark" if I've set my "Coin" value to "DogeCoinDark"?
I just want to make sure I'm doing this right!
Correction #3: Ok I think I see what is going on. You don't set the "Coin" to a specific coin. You set it to the algorithm? And then you set the auto-payout to the coin you wish to be paid in? Am I on the right track?
Your correction #3 is right.
You set the coin to mine from worker, and you will be get paid in coin which is selected at "Auto Exchange" page.
12001 port is just endpoint for Scrypt and you select which coin, which auto switch port you want mine.
Maybe 17001 is better if you want simple mining. This port is simple port for auto switching only profitable Scrypt coins. You don't need to set mining coin for it.
I think I need to write "Getting Started" page more in detail.
Thanks.
April 26, 2015, 10:44:01 AM
Mining Pool Reviews, Ratings and Rankings.
Mining Pool Hub is listed on BlockGen, you can review them here: http://blockgen.net/miningPool/88
April 26, 2015, 04:23:53 AM
Hmm.. I've been mining Scrypt on another pool. When I saw your announcement I tried to switch over to mine my Scrypt on your site. But no matter what I try to set on MMR I get "unable to authenticate. Do you wish to add anyway?" Is there a problem with Scrypt? I've tried pointing directly at a coin as well as using the "Hub" feature. Please advise.
Correction: I can mine an individual Scrypt coin fine. It seems that I'm having issues with the "Hub" port 12001
Correction #2: Let me make sure I understand how to use the "Hub". I've clicked on "Hub". Under "My Workers" I create a new worker. "Worker Login"="Workername associated with my account" "Worker Password"="x" "Coin"="The coin I wish to be paid in" and for Scrypt I would point to port 12001.
So this would cause my mining rig to mine the most profitable coin at the moment and to be paid in DogeCoinDark" if I've set my "Coin" value to "DogeCoinDark"?
I just want to make sure I'm doing this right!
Correction #3: Ok I think I see what is going on. You don't set the "Coin" to a specific coin. You set it to the algorithm? And then you set the auto-payout to the coin you wish to be paid in? Am I on the right track?
Correction: I can mine an individual Scrypt coin fine. It seems that I'm having issues with the "Hub" port 12001
Correction #2: Let me make sure I understand how to use the "Hub". I've clicked on "Hub". Under "My Workers" I create a new worker. "Worker Login"="Workername associated with my account" "Worker Password"="x" "Coin"="The coin I wish to be paid in" and for Scrypt I would point to port 12001.
So this would cause my mining rig to mine the most profitable coin at the moment and to be paid in DogeCoinDark" if I've set my "Coin" value to "DogeCoinDark"?
I just want to make sure I'm doing this right!
Correction #3: Ok I think I see what is going on. You don't set the "Coin" to a specific coin. You set it to the algorithm? And then you set the auto-payout to the coin you wish to be paid in? Am I on the right track?
April 25, 2015, 08:42:53 AM
New coin pools
Smartcoin
- http://smartcoin.miningpoolhub.com
MonetaryUnit
- http://monetaryunit.miningpoolhub.com
Securecoin
- http://securecoin.miningpoolhub.com
Quark
- http://quark.miningpoolhub.com
Dogecoindark
- http://dogecoindark.miningpoolhub.com
Geocoin
- http://geocoin.miningpoolhub.com
Myriadcoin (Qubit)
- http://myriadcoin-qubit.miningpoolhub.com
Digibyte (Skein)
- http://digibyte-skein.miningpoolhub.com
Myriadcoin (Skein)
- http://myriadcoin-skein.miningpoolhub.com
Just opened several mining pools.
Mining Pool Hub is N:N multipool, you can mine the most profitable coin and get paid in any coin you select.
Come and mine together!
http://miningpoolhub.com/
~
Smartcoin
- http://smartcoin.miningpoolhub.com
MonetaryUnit
- http://monetaryunit.miningpoolhub.com
Securecoin
- http://securecoin.miningpoolhub.com
Quark
- http://quark.miningpoolhub.com
Dogecoindark
- http://dogecoindark.miningpoolhub.com
Geocoin
- http://geocoin.miningpoolhub.com
Myriadcoin (Qubit)
- http://myriadcoin-qubit.miningpoolhub.com
Digibyte (Skein)
- http://digibyte-skein.miningpoolhub.com
Myriadcoin (Skein)
- http://myriadcoin-skein.miningpoolhub.com
Just opened several mining pools.
Mining Pool Hub is N:N multipool, you can mine the most profitable coin and get paid in any coin you select.
Come and mine together!
http://miningpoolhub.com/
~
April 25, 2015, 12:08:55 AM
Jackpotcoin will be removed soon.
We will also payout after the pool close but you would need to contact us manually then.
We encourage you to withdraw your coin as soon as possible.
Actually we didn't like to close jackpotcoin pool, but jackpotcoin's too frequent PoS block generation hurts our server resource too much. Sorry that we know this notice may discourage jackpotcoin miners and investors, we had no choice at this moment.
Sorry again.
We will also payout after the pool close but you would need to contact us manually then.
We encourage you to withdraw your coin as soon as possible.
Actually we didn't like to close jackpotcoin pool, but jackpotcoin's too frequent PoS block generation hurts our server resource too much. Sorry that we know this notice may discourage jackpotcoin miners and investors, we had no choice at this moment.
Sorry again.
April 24, 2015, 10:21:54 AM
Nutcoin, Friendshipcoin, Kobocoin will be removed soon.
We will also payout after the pool close but you would need to contact us manually then.
We encourage you to withdraw your coin as soon as possible.
We will also payout after the pool close but you would need to contact us manually then.
We encourage you to withdraw your coin as soon as possible.
April 22, 2015, 08:59:39 AM
Thanks, once I can see it working, I'll do some more digging.
Cheers,
K.
Okay - writing this one off. Moving on...
Lifeforce.info works though.
Cheers,
K.
Okay - writing this one off. Moving on...
Lifeforce.info works though.
April 22, 2015, 03:34:05 AM
Hi Folks,
I did a short experimental run with a cudaminer while the pool was apparently autoswitch-mining ARI. I had auto-exchange set for bitcoin and this resulted in these transactions when logged in to http://aricoin.miningpoolhub.com/:
I take it those figures are in ARI? And thus 3.42... ARI have been sent somewhere... but I cannot find them? They are not showing at bicoin.miningpoolhub.com.
I'm just trying to understand the flow through the system and see where the balances go b4 I commit to more mining.
Cheers,
K.
I did a short experimental run with a cudaminer while the pool was apparently autoswitch-mining ARI. I had auto-exchange set for bitcoin and this resulted in these transactions when logged in to http://aricoin.miningpoolhub.com/:
I take it those figures are in ARI? And thus 3.42... ARI have been sent somewhere... but I cannot find them? They are not showing at bicoin.miningpoolhub.com.
I'm just trying to understand the flow through the system and see where the balances go b4 I commit to more mining.
Cheers,
K.
Hi
Debit_AE is debit transaction for auto exchange and these coins are transferred to exchange sites like Cryptsy, Bittrex.
Credit transaction will be created at Bitcoin pool when these auto exchanges are completed.
Auto exchange needs some time because it needs deposit, exchange, and withdraw process. Mining pool hub pile up exchanged coins and withdraw only at a certain situation to reduce the withdraw fee. Exchange sites usually charges small amount of withdraw fee but we try to reduce the rate of it.
In normal situation, your coins will be credited to bitcoin pool within 6 to 24 hours.
We are about to open balance overview page for all coins. Then, things will be more clear.
Thanks.
April 22, 2015, 03:26:22 AM
I have a question about the MiningPoolHub desktop interface. To the bottom left of the Overview box there's a smaller box entitled "Round Information" That typically has two concentric circles inside. What is the function of this box? What are the two concentric circles representing?
Inquiring minds want to know!!
Inquiring minds want to know!!
This two circle represents those values.
Your valid shares, your invalid shares - inner circle
Pool valid shares, pool invalid shares - outer circle
This data doesn't match exactly, because it's updated in certain time interval.
Actually it is not important info though.
Thanks.
That's great info! Thanks! I really like your pool!
Thanks!
April 21, 2015, 10:53:22 PM
Hi Folks,
I did a short experimental run with a cudaminer while the pool was apparently autoswitch-mining ARI. I had auto-exchange set for bitcoin and this resulted in these transactions when logged in to http://aricoin.miningpoolhub.com/:
http://tyfon.info/miningtrans900.jpg
I take it those figures are in ARI? And thus 3.42... ARI have been sent somewhere... but I cannot find them? They are not showing at bicoin.miningpoolhub.com.
I'm just trying to understand the flow through the system and see where the balances go b4 I commit to more mining.
Cheers,
K.
I did a short experimental run with a cudaminer while the pool was apparently autoswitch-mining ARI. I had auto-exchange set for bitcoin and this resulted in these transactions when logged in to http://aricoin.miningpoolhub.com/:
http://tyfon.info/miningtrans900.jpg
I take it those figures are in ARI? And thus 3.42... ARI have been sent somewhere... but I cannot find them? They are not showing at bicoin.miningpoolhub.com.
I'm just trying to understand the flow through the system and see where the balances go b4 I commit to more mining.
Cheers,
K.
April 18, 2015, 04:49:51 AM
I have a question about the MiningPoolHub desktop interface. To the bottom left of the Overview box there's a smaller box entitled "Round Information" That typically has two concentric circles inside. What is the function of this box? What are the two concentric circles representing?
Inquiring minds want to know!!
Inquiring minds want to know!!
This two circle represents those values.
Your valid shares, your invalid shares - inner circle
Pool valid shares, pool invalid shares - outer circle
This data doesn't match exactly, because it's updated in certain time interval.
Actually it is not important info though.
Thanks.
That's great info! Thanks! I really like your pool!
April 18, 2015, 01:39:28 AM
I have a question about the MiningPoolHub desktop interface. To the bottom left of the Overview box there's a smaller box entitled "Round Information" That typically has two concentric circles inside. What is the function of this box? What are the two concentric circles representing?
Inquiring minds want to know!!
Inquiring minds want to know!!
This two circle represents those values.
Your valid shares, your invalid shares - inner circle
Pool valid shares, pool invalid shares - outer circle
This data doesn't match exactly, because it's updated in certain time interval.
Actually it is not important info though.
Thanks.
April 18, 2015, 01:25:33 AM
I'm a little confused about the "Hub" feature.
As I understand it I can point a X11 mining rig at MPH. I can/will in return mine *ALL* X11-based coins?
Then after I've mined some coins I can get paid in Dash? Even though I mined other X11 coins?
Can someone provide some specific instructions on how I would set things to mine ALL X11 coins and be paid in Dash?
Thanks in advance!
UPDATE: I figured it out.
As I understand it I can point a X11 mining rig at MPH. I can/will in return mine *ALL* X11-based coins?
Then after I've mined some coins I can get paid in Dash? Even though I mined other X11 coins?
Can someone provide some specific instructions on how I would set things to mine ALL X11 coins and be paid in Dash?
Thanks in advance!
UPDATE: I figured it out.
Good!
You can mine any coins and your credited coins will be automatically exchanged and credited to the coin you select at "Auto Exchange" page. Of course you can select Dash for it.
Thanks.
April 16, 2015, 02:54:16 PM
I have a question about the MiningPoolHub desktop interface. To the bottom left of the Overview box there's a smaller box entitled "Round Information" That typically has two concentric circles inside. What is the function of this box? What are the two concentric circles representing?
Inquiring minds want to know!!
Inquiring minds want to know!!
April 16, 2015, 08:41:25 AM
I'm a little confused about the "Hub" feature.
As I understand it I can point a X11 mining rig at MPH. I can/will in return mine *ALL* X11-based coins?
Then after I've mined some coins I can get paid in Dash? Even though I mined other X11 coins?
Can someone provide some specific instructions on how I would set things to mine ALL X11 coins and be paid in Dash?
Thanks in advance!
UPDATE: I figured it out.
As I understand it I can point a X11 mining rig at MPH. I can/will in return mine *ALL* X11-based coins?
Then after I've mined some coins I can get paid in Dash? Even though I mined other X11 coins?
Can someone provide some specific instructions on how I would set things to mine ALL X11 coins and be paid in Dash?
Thanks in advance!
UPDATE: I figured it out.
April 13, 2015, 07:06:16 AM
Jump to: