Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 355. (Read 487870 times)

I tried it now and it is fast and no hiccups so far.
I've been trying for a week to set up an account and browse different hubs and what not.
I was always ending with the aforementioned problem.

Can you tell us what page do you get this message often?
We will investigate on it and find if any bottle-neck exists.

And, your mining rig is connected independently to web server.
Web server is running under very limited resource and sometimes it can't handle massive connections.
You'll not suffer from disconnection with mining rigs. It is peace and calm, super efficient.


P.S. We will fix some insufficient web server resource within 2~3 days. It was temporary state.

It looks like every time open the site the first couple of pages load fine,
and then I get "site not available" bla-bla-bla... The DDOS protection thingy...
So how can I use it for mining if I can even open the site?!

Or I get some version of the site and this:

hi please add metal music coin in your pool. we are looking for some mining pool. we are listed in cryptopia and yobit. hope you add us. cheers mate

You're welcome.

You can also send email to [email protected] whenever you need support.
We will reply within one hour at day and few hours at night.

Have a nice weekend!

Thanks a lot . it works now and I was very lucky that you were here

Fee is 2%.

Sorry.
There was typo error.


    {
        "poolname" : "scrypt",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12001",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "zuikkis",
        "nfactor" : "10"
    },
    {
        "poolname" : "scryptn",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12002",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "zuikkis",
        "nfactor" : "11"
    }
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}


There was comma related error around "nfactor" lines. Replace with above configuration instead.
And don't forget to replace all username to your id.
It should work then.

Sorry again.

i cant seem to see what the fee is

I did all of these but when i open *.bat file it said press any key to continue and when i press Enter or any key the window of cmd became closed .

See this picture :

Happy to hear you like our service.
Thanks!

To find the best services, I'm a pool hopping miner. At times it almost been like a disease, and I certainly lost money
do this. However, a this point I have a handfull of services that I really appreciator. So:

Thank you, Mining Pool Hub!

Improved vardiff logic.

Your miners will get to appropriate difficulty level faster and accurately than before.

make a "default.conf" file and copy & paste below lines.

{
"pools" : [
    {
        "poolname" : "neoscrypt",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12012",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "neoscrypt"
    },
    {
        "poolname" : "x15",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12009",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "bitblock"
    },
    {
        "poolname" : "x13",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12008",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "marucoin-mod"
    },
    {
        "poolname" : "x11",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12007",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "darkcoin-mod"
    },
    {
        "poolname" : "myriadcoin-groestl",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12005",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "myriadcoin-groestl"
    },
    {
        "poolname" : "keccak",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12003",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "maxcoin"
    },
    {
        "poolname" : "scrypt",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12001",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "zuikkis"
        "nfactor" : "10",
    },
    {
        "poolname" : "scryptn",
        "url" : "stratum+tcp://hub.miningpoolhub.com:12002",
        "user" : "username.workername",
        "pass" : "x",
        "algorithm" : "zuikkis"
        "nfactor" : "11",
    }
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}


and run this config file with below command

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe -c default.conf
pause



Above config file content is already written at
https://miningpoolhub.com/?page=gettingstarted



Sad thing is that sgminer5 doesn't support all algos.
For example, to mine skein you need custom cgminer for it.

Cryptsy related auto exchange issue is resolved, and much coins are credited already.

What coins are you missing still? We will investigate deeper on it.

Hi
Good to see you.

1) You can see more info about normalized profit by mouse over the green text "Norm. Profit" from the homepage.

--------
Normalized Profit

Measured each algo's hashrate based on AMD R9 280x
and normalized relatively to compare profitability across different algos.

Groestl = 4.8
Keccak = 486
Lyra2RE = 1.2
Myriad-Groestl = 24.4
NeoScrypt = 0.3
Scrypt = 1
Scrypt-N = 0.46
Skein = 347.2
Quark = 6
Qubit = 7.84
X11 = 5.5
X13 = 3.8
X15 = 3.4
-------
I think it's enough to say about normalization and not normalization.

If you want to compare it with westhash, then switch to "No Norm." which is next to "AMD", "Nvidia"
Here is direct url for it.
https://miningpoolhub.com/?page=home&normalize=none
(I frequently see many algos that are profitable. Sometimes you would get more coins than before when you just rent and mine)

"No normalization means", we calculate the expected profit and it shows plain BTC / GH / Day.

Calculation is based on "net difficulty, coin amount per block, coin price, coin amount on buying orders at exchange sites, block finding luck". In real world, there's delay on network and expected profit don't match as ideal actually. So "block finding luck" which is retrieved from few weeks of mining statistics from our pool is also applied. So this expected profit is more accurate than other statistics from just coin wallet calculation.


2. I think I have inform you mining types.

Connection is closed only when algo changes.
Algo switch mining don't close connection and it just smoothly changes between coins. If you mine only x11 algo, then it will switch dash, startcoin, fractalcoin with no interrupt, no waiting time, and with optimized vardiff value continually.
You can try this type of mining. These are called Algo switch mining and port range is 17XXX

Multi-algo switch (port range is 12XXX) changes between algo time to time and connection is closed time to time too. It doesn't close connection if it doesn't have to (like changing same algo coins) but, it will eventually need to disconnect sometime to change algo and your diff level will be reset.
At this situation, you can set starting difficulty for each algo by setting like d=0.01

Setting starting diff value info is written here.
https://bitcointalksearch.org/topic/m.10596890


I think you would like both.

ANY prepared profit switching CONFIG FILE FOR sgminer 5.1 ? i couldn't write these command lines .

any news about my coins ?

Hi
ok, still new at your pool.
if this has been asked before, sorry; but with 29 pages of forum talk, I could not find it.

1) can you tell me how you get " Norm. Profit " from the hub page?
I have just come from westhash and need some idea as how to compare your listing of payout and their posting of payout.

2) is there a way to slow down the coin changing when doing an ALog mining?
my miners loose so much through put changing and then running up through the Vair. Diff.
and no the two coins do not use the same, Vair. Diff.  .
thanks

Sorry for auto exchange delays.

Currently Cryptsy API is broken and coins already sent to Cryptsy is not movable right now.
We will investigate and correct these errors as soon as possible.

Balance overview is still under development. We had to deal with some server load, optimization problem. It will not take long.