Pages:
Author

Topic: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins - page 45. (Read 57740 times)

newbie
Activity: 5
Merit: 0
until now pool still not get block XZC Cry
my payment need wait until get block but if 3 month still not get block so how about my payment Huh
newbie
Activity: 6
Merit: 0
Zergpool administrators,

Can someone tell me how often the http://api.zergpool.com:8080/api/status page updates, 1 min, 5 min, longer, shorter?  Also could you estimate the delay, i.e. how far back in history was the estimated_current value calculated?  Was the estimated_current value from 1 min ago, 5 min, longer, shorter?  An answer is greatly appreciated.  Great pool so far, thanks.

Hi,

We trigger updated every 15 seconds, to collect data takes like 30-60 sec.
So I would say API refreshes every 1.5 min, however from my mining experience, I would not recommend to switch over more frequently than 5mins. As you spend time to reload miner to different algo(program)

Thank you for the response.  Can I assume the http://api.zergpool.com:8080/api/currencies page is updated about the same, refreshes about every 1.5 min?
member
Activity: 1027
Merit: 19
Hey there, i am wondering if i can run an antminer on zergpool.

I like this pool, running my gpus currently and wondering if there is profit to make with antminers on this pool.

Yes, SHA256 coins has been added, and growing, you can give it a try
newbie
Activity: 8
Merit: 0
Hey there, i am wondering if i can run an antminer on zergpool.

I like this pool, running my gpus currently and wondering if there is profit to make with antminers on this pool.
member
Activity: 1027
Merit: 19
Zergpool administrators,

Can someone tell me how often the http://api.zergpool.com:8080/api/status page updates, 1 min, 5 min, longer, shorter?  Also could you estimate the delay, i.e. how far back in history was the estimated_current value calculated?  Was the estimated_current value from 1 min ago, 5 min, longer, shorter?  An answer is greatly appreciated.  Great pool so far, thanks.

Hi,

We trigger updated every 15 seconds, to collect data takes like 30-60 sec.
So I would say API refreshes every 1.5 min, however from my mining experience, I would not recommend to switch over more frequently than 5mins. As you spend time to reload miner to different algo(program)
member
Activity: 1027
Merit: 19
UPDATE.

1. Zergpool will guarantee payouts in DASH coin from now on


Can you please answer my question in the post previous to this one? Thanks.

Hi,

If noone mines BSD anymore, I will buy some to cover your earnings.
member
Activity: 1027
Merit: 19
Hi Team,

Is it the pass ---> c-DASH username :

Hi,

password
c=DASH

username
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
I too had 30+ BSD and didn't get paid on Sunday.  Roll Eyes


Atm 49 BSD... Sad

The pool is short of bitsend by 80.  Once it finds more blocks the payouts will happen.  Since we haven't hit a block in 5 days I'd say you're best off mining for something else for the time being. 


"Accounts with no mining activity for 3 months are purged - this is done as part of clean up activities to keep health of the pool"

What happens if I don't get my funds within 3 months?

They don't say "accounts that haven't been paid in 3 month", but accounts with no mining activity.
Even if you're mining with a single card 3 hours per day (I don't see any other reason that you wouldn't get paid within 3 months), your account is active. Even if you mine 1 hour per week, you'll get paid after a year or two.
hero member
Activity: 1218
Merit: 534
UPDATE.

1. Zergpool will guarantee payouts in DASH coin from now on


Can you please answer my question in the post previous to this one? Thanks.
newbie
Activity: 6
Merit: 0
Zergpool administrators,

Can someone tell me how often the http://api.zergpool.com:8080/api/status page updates, 1 min, 5 min, longer, shorter?  Also could you estimate the delay, i.e. how far back in history was the estimated_current value calculated?  Was the estimated_current value from 1 min ago, 5 min, longer, shorter?  An answer is greatly appreciated.  Great pool so far, thanks.
newbie
Activity: 25
Merit: 1
Hi Team,

Is it the pass ---> c-DASH username :
member
Activity: 1027
Merit: 19
UPDATE.

1. Zergpool will guarantee payouts in DASH coin from now on
hero member
Activity: 1218
Merit: 534
I too had 30+ BSD and didn't get paid on Sunday.  Roll Eyes


Atm 49 BSD... Sad

The pool is short of bitsend by 80.  Once it finds more blocks the payouts will happen.  Since we haven't hit a block in 5 days I'd say you're best off mining for something else for the time being. 


"Accounts with no mining activity for 3 months are purged - this is done as part of clean up activities to keep health of the pool"

What happens if I don't get my funds within 3 months?
newbie
Activity: 25
Merit: 1
Dear Team,

Now the balance is showing

Thanks for fast respond
member
Activity: 1027
Merit: 19
3 unit X11 - miner here start
for 3 days

Thanks

After 9 hours

Balance still 0

is it normal situation for X11 algo


Thanks

No, something definitely wrong, please specify your wallet address(you can PM it) and command line you are using
member
Activity: 1027
Merit: 19
I was try 1 days
Scrypt for verge
c=XVG,mc=XVG but have problem
I'm follow everyday, working but looking everything " 0 "
Balance, earning or etc.
After of course I was change this pool
is scam pool ?


Hello,

Please send me your wallet address , will check what is an issue

Wallet: DCCPmdCdrDSQkXjn91iTr16SXNCCJ7YCkL
Name   Immature   Confirmed   Total   Value*
   Verge
(total pending)            0.00000000 XVG
   Balance payment threshold is ~114.05 based on 0.001 BTC equivalent; and ~22.81 on Sunday      0.00000000 XVG
   Total Unpaid      0.00000000 XVG
   Total Paid      0.00000000 XVG
   Total Earned      0.00000000 XVG


You see, everything " 0 "
Why?
My L3+ working zergpool and I'm wait wait wait but after I was change
Because machine working for you, not for me
My settings: password: c=XVG,mc=XVG

Weird, none of you connections are registered at pool. I will need some more details to investigate, command line you are using to connect to a pool.
You can also ping me in Discord that would speed up investigation.

And actuall L3+ is for scrypt, if you want to mine XVG in scrypt try following setup c=XVG,mc=XVG-scrypt

newbie
Activity: 25
Merit: 1
3 unit X11 - miner here start
for 3 days

Thanks

After 9 hours

Balance still 0

is it normal situation for X11 algo


Thanks
sr. member
Activity: 404
Merit: 251
I was try 1 days
Scrypt for verge
c=XVG,mc=XVG but have problem
I'm follow everyday, working but looking everything " 0 "
Balance, earning or etc.
After of course I was change this pool
is scam pool ?


Hello,

Please send me your wallet address , will check what is an issue

Wallet: DCCPmdCdrDSQkXjn91iTr16SXNCCJ7YCkL
Name   Immature   Confirmed   Total   Value*
   Verge
(total pending)            0.00000000 XVG
   Balance payment threshold is ~114.05 based on 0.001 BTC equivalent; and ~22.81 on Sunday      0.00000000 XVG
   Total Unpaid      0.00000000 XVG
   Total Paid      0.00000000 XVG
   Total Earned      0.00000000 XVG


You see, everything " 0 "
Why?
My L3+ working zergpool and I'm wait wait wait but after I was change
Because machine working for you, not for me
My settings: password: c=XVG,mc=XVG
newbie
Activity: 25
Merit: 1
3 unit X11 - miner here start
for 3 days

Thanks
hero member
Activity: 1218
Merit: 534

The pool is short of bitsend by 80.  Once it finds more blocks the payouts will happen.  Since we haven't hit a block in 5 days I'd say you're best off mining for something else for the time being. 

Any idea how long it might take to get paid?
Pages:
Jump to: