[ANN][POW] 👾Torque👾 - decentralized node list via IPFS & ZeroNet - page 47.

kabi123

full member

Activity: 247

Merit: 100

Quote from: cedricp on April 11, 2018, 04:17:43 PM

Quote from: kabi123 on April 11, 2018, 03:45:21 PM

hi

i cant find right setting for NH

algo cryptonightv7

communitypool.stellite.cash port 6655

password x or worker or email, all the time 100% reject.... im going crazy from this...

ty for any tips

https://i.imgur.com/XPiLXaO.jpg

Hi,

There is a problem with the port, nicehash is trying to connect to port 16223. That's 6655 for Nicehash

no its not, that just screanshot from another pool with same 100% rej problem...i tested 2 pools

RetardationNation

newbie

Activity: 16

Merit: 0

Quote from: cedricp on April 11, 2018, 04:38:58 PM

Quote from: RetardationNation on April 11, 2018, 04:33:16 PM

soo, not so pleased with the result of this. it ran 30 min, total hardware errors - 0. In the version i downloaded there was no "gpu memory erros"
sadly when i closed it my miner restarted and 2 cards is no longer detected by windows :/
starting to regret buying vega cards...

Don't worry, we go to find.

Unplugged alimentation from the wall, wait 30sec and try again.
Have you modded the bios ? have you a strap to boot on the second bios on the card ?

yeah i'll fix it, but i'm at work and di this by remote. my mistake for doing this by remote. bios is not modded since its not possible.
second bios is only ULPS on these cards wich reduces hashrate alot so no. It wont even start the cards thats found. so it's sutdown for now Sad

quite frankly my rigs did not have this problem on xmr and graft so a warning for everyone using communitypool, check your payments. to me it seems like the pool are skimming coins from users. i'm going back to xmr.

cedricp

newbie

Activity: 42

Merit: 0

Quote from: RetardationNation on April 11, 2018, 04:33:16 PM

soo, not so pleased with the result of this. it ran 30 min, total hardware errors - 0. In the version i downloaded there was no "gpu memory erros"
sadly when i closed it my miner restarted and 2 cards is no longer detected by windows :/
starting to regret buying vega cards...

Don't worry, we go to find.

Unplugged alimentation from the wall, wait 30sec and try again.
Have you modded the bios ? have you a strap to boot on the second bios on the card ?
And sorry Vega doesn't have memory error monitoring...

So first try on other pool to see if its the same, if yes try to underclock the CMem just the time of testing 1-2 hours.

cedricp

newbie

Activity: 42

Merit: 0

Quote from: ?? on ??

Trading starts soon @ vicex.io

Good,

I'm on it...... ooops no, registration closed for the moment, waiting news Wink

RetardationNation

newbie

Activity: 16

Merit: 0

Quote from: cedricp on April 11, 2018, 03:21:28 PM

Quote from: RetardationNation on April 11, 2018, 03:02:24 PM

Quote from: cedricp on April 11, 2018, 02:55:55 PM

Quote from: RetardationNation on April 11, 2018, 02:30:46 PM

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

Hello,

How much you earn, at your hashrate, you could spin around 1250 / hour.
Have you verified that you have no memory errors on your rigs.
The hashrate remains the same but takes a little more time to find a block...

Right now about 1000 / hour, even a bit less. According to xmr-stak no or very few invalid results. Is there any other way to check for errors?

Yes the mining software dont tell you memory errors of your rigs, errors won't damage the hardware (voltage, temperature, and excessive clocks themselves can all contribute to this), but even correctable ones will reduce performance, correcting errors take time to the card, the results is accepted by the miner but slower. I have made many test on it.

you can check it with HWiNFO on windows.
https://www.hwinfo.com/download.php

Load it up, click on sensors only box, start it and scroll right to bottom you will see the line saying gpu memory errors

It only starts to count when it’s on, so worth starting at same time as your miner app.

If you have many, like 1000 in 30 minutes, you can just underclock of 10Mhz the Cmem.

soo, not so pleased with the result of this. it ran 30 min, total hardware errors - 0. In the version i downloaded there was no "gpu memory erros"
sadly when i closed it my miner restarted and 2 cards is no longer detected by windows :/
starting to regret buying vega cards...

cedricp

newbie

Activity: 42

Merit: 0

Quote from: kabi123 on April 11, 2018, 03:45:21 PM

hi

i cant find right setting for NH

algo cryptonightv7

communitypool.stellite.cash port 6655

password x or worker or email, all the time 100% reject.... im going crazy from this...

ty for any tips

https://i.imgur.com/XPiLXaO.jpg

Hi,

There is a problem with the port, nicehash is trying to connect to port 16223. That's 6655 for Nicehash

kabi123

full member

Activity: 247

Merit: 100

hi

i cant find right setting for NH

algo cryptonightv7

communitypool.stellite.cash port 6655

password x or worker or email, all the time 100% reject.... im going crazy from this...

ty for any tips

https://i.imgur.com/XPiLXaO.jpg

cedricp

newbie

Activity: 42

Merit: 0

Quote from: RetardationNation on April 11, 2018, 03:25:36 PM

thank you, i will try this

It can be the pool too... Have you made a test on other pool ?

RetardationNation

newbie

Activity: 16

Merit: 0

Quote from: cedricp on April 11, 2018, 03:21:28 PM

Quote from: RetardationNation on April 11, 2018, 03:02:24 PM

Quote from: cedricp on April 11, 2018, 02:55:55 PM

Quote from: RetardationNation on April 11, 2018, 02:30:46 PM

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

Hello,

How much you earn, at your hashrate, you could spin around 1250 / hour.
Have you verified that you have no memory errors on your rigs.
The hashrate remains the same but takes a little more time to find a block...

Right now about 1000 / hour, even a bit less. According to xmr-stak no or very few invalid results. Is there any other way to check for errors?

Yes the mining software dont tell you memory errors of your rigs, errors won't damage the hardware (voltage, temperature, and excessive clocks themselves can all contribute to this), but even correctable ones will reduce performance, correcting errors take time to the card, the results is accepted by the miner but slower. I have made many test on it.

you can check it with HWiNFO on windows.
https://www.hwinfo.com/download.php

Load it up, click on sensors only box, start it and scroll right to bottom you will see the line saying gpu memory errors

It only starts to count when it’s on, so worth starting at same time as your miner app.

If you have many, like 1000 in 30 minutes, you can just underclock of 10Mhz the Cmem.

thank you, i will try this

cedricp

newbie

Activity: 42

Merit: 0

Quote from: RetardationNation on April 11, 2018, 03:02:24 PM

Quote from: cedricp on April 11, 2018, 02:55:55 PM

Quote from: RetardationNation on April 11, 2018, 02:30:46 PM

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

Hello,

How much you earn, at your hashrate, you could spin around 1250 / hour.
Have you verified that you have no memory errors on your rigs.
The hashrate remains the same but takes a little more time to find a block...

Right now about 1000 / hour, even a bit less. According to xmr-stak no or very few invalid results. Is there any other way to check for errors?

Yes the mining software dont tell you memory errors of your rigs, errors won't damage the hardware (voltage, temperature, and excessive clocks themselves can all contribute to this), but even correctable ones will reduce performance, correcting errors take time to the card, the results is accepted by the miner but slower. I have made many test on it.

you can check it with HWiNFO on windows.
https://www.hwinfo.com/download.php

Load it up, click on sensors only box, start it and scroll right to bottom you will see the line saying gpu memory errors

It only starts to count when it’s on, so worth starting at same time as your miner app.

If you have many, like 1000 in 30 minutes, you can just underclock of 10Mhz the Cmem.

RetardationNation

newbie

Activity: 16

Merit: 0

Quote from: cedricp on April 11, 2018, 02:55:55 PM

Quote from: RetardationNation on April 11, 2018, 02:30:46 PM

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

Hello,

How much you earn, at your hashrate, you could spin around 1250 / hour.
Have you verified that you have no memory errors on your rigs.
The hashrate remains the same but takes a little more time to find a block...

Right now about 1000 / hour, even a bit less. According to xmr-stak no or very few invalid results. Is there any other way to check for errors?

cedricp

newbie

Activity: 42

Merit: 0

Quote from: RetardationNation on April 11, 2018, 02:30:46 PM

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

Hello,

How much you earn, at your hashrate, you could spin around 1250 / hour.
Have you verified that you have no memory errors on your rigs.
The hashrate remains the same but takes a little more time to find a block...

RetardationNation

newbie

Activity: 16

Merit: 0

So, is anyone else getting low payments from "communitypool.stellite.cash" ?

According to several calculators compared to payments from pool i'm getting roughly 25% less than i am supposed to.
Got a stable hashrate of 28 KH/s (2 rigs) and tried both static diff and dynamic but same result. At worst i got about 1% invalid shares but this should not ammount to 25% less profit.

each rig has an avg. result time of approx. 30 sec on diff 400k.

Any suggestions?

CryptoFlamingo

newbie

Activity: 82

Merit: 0

Quote from: cedricp on April 11, 2018, 09:17:05 AM

Quote from: CryptoFlamingo on April 11, 2018, 09:14:33 AM

Quote from: cedricp on April 10, 2018, 12:20:19 PM

Quote from: CryptoFlamingo on April 10, 2018, 09:46:16 AM

I´m trying to mine with few RX470 8GB and RX570 4G, but I always get invalid shares only - I tried different ports... And it´s the same with Claymore and XMR stak - always the same error: lowdifficultyshare... Can anybody help?

Hi,

What version of claymore and xmrstak ?
Please post your command line or config for help

Hi, it´s Claymore's CryptoNote AMD GPU Miner v11.3 and here is config:

Code:

-xpool stratum+ssl://communitypool.stellite.cash:6600
-xwal Se3r29Zc3DbB5rq5MGmuGf2ownT62dkUAUwUFm3jx9VT37V6JRYoBEZVCYZzLodzJKJJgrJDNtDQbBzrNoGqgBKE1K1pLHasC
-xpsw x

Hi, You need to add pow7 option to tell claymore the new algo.
You can add in pass your rigname and your mail to access settings on the pool.

Code:

-xpool stratum+ssl://communitypool.stellite.cash:6600
-xwal Se3r29Zc3DbB5rq5MGmuGf2ownT62dkUAUwUFm3jx9VT37V6JRYoBEZVCYZzLodzJKJJgrJDNtDQbBzrNoGqgBKE1K1pLHasC
-xpsw Stellite:[email protected]
-pow7 1

For RX470 and RX570 you can try Cast_XMR, i have 100H/s more each card than claymore.

thanks man, now it works

cedricp

newbie

Activity: 42

Merit: 0

Quote from: SIMPLEMINER1 on April 11, 2018, 11:06:21 AM

forget XTL doge price is 100 satoshi .. im mining doge ... amateur

Are you talking about Dogecoin ? it's ridiculous to mine it with CPU or GPU.
Who is the amateur saying this in the XTL sub-forum. Do what you whant... we don't care of it.

The price of a coin have nothing to do if you mine only one coin a day. you do more, have an ASIC, right, good, we don't care of it.

it's an investisment, with a project behind. Stellite is a community project made by and for a community.

Sorry, Good mining to you

Cheesy

Are you using simpleminer ? Amateur ?? Cheesy

SIMPLEMINER1

newbie

Activity: 49

Merit: 0

forget XTL doge price is 100 satoshi .. im mining doge ... amateur

cedricp

newbie

Activity: 42

Merit: 0

Quote from: shuxin9 on April 11, 2018, 10:09:31 AM

25 words have also been I can't find it..

Ok, lets try a think

Start stellite-wallet-cli and connect to your wallet.

Type this : spendkey (save them) and viewkey (save them too)

Your screen could be like this :

Code:

[wallet Se3wnd (no daemon)]: spendkey
Wallet password: ******************
secret: e855c0f14ff7f56a9d08c643e2eba46000fb0ddce2cbf00434d049c62d43a20b
public: cef59451335ff73e76ac26856564b9d929128d6923026cabc0168de39eb6ed81f
[wallet Se3wnd (no daemon)]: viewkey
Wallet password: ******************
secret: d17e158cf59f06c5b6f6663451783136b826f010baf1670dae2bb7b9574cc70c
public: 2bdc7fa1b2176c288db201e6bf12f53c6e768250ab7444af5fcddf61856093a6

Now try to restore your wallet using your secret spendkey with

Code:

stellite-wallet-cli.exe --restore-deterministic-wallet

Tell me your results... Thanks

PS : Have you tried before to delete all files in C:\ProgramData\stellite and launch the sync again ?

shuxin9

newbie

Activity: 36

Merit: 0

25 words have also been I can't find it..

cedricp

newbie

Activity: 42

Merit: 0

Quote from: CryptoFlamingo on April 11, 2018, 09:14:33 AM

Quote from: cedricp on April 10, 2018, 12:20:19 PM

Quote from: CryptoFlamingo on April 10, 2018, 09:46:16 AM

I´m trying to mine with few RX470 8GB and RX570 4G, but I always get invalid shares only - I tried different ports... And it´s the same with Claymore and XMR stak - always the same error: lowdifficultyshare... Can anybody help?

Hi,

What version of claymore and xmrstak ?
Please post your command line or config for help

Hi, it´s Claymore's CryptoNote AMD GPU Miner v11.3 and here is config:

Code:

-xpool stratum+ssl://communitypool.stellite.cash:6600
-xwal Se3r29Zc3DbB5rq5MGmuGf2ownT62dkUAUwUFm3jx9VT37V6JRYoBEZVCYZzLodzJKJJgrJDNtDQbBzrNoGqgBKE1K1pLHasC
-xpsw x

Hi, You need to add pow7 option to tell claymore the new algo.
You can add in pass your rigname and your mail to access settings on the pool.

Code:

-xpool stratum+ssl://communitypool.stellite.cash:6600
-xwal Se3r29Zc3DbB5rq5MGmuGf2ownT62dkUAUwUFm3jx9VT37V6JRYoBEZVCYZzLodzJKJJgrJDNtDQbBzrNoGqgBKE1K1pLHasC
-xpsw Stellite:[email protected]
-pow7 1

For RX470 and RX570 you can try Cast_XMR, i have 100H/s more each card than claymore.

cedricp

newbie

Activity: 42

Merit: 0

Quote from: shuxin9 on April 11, 2018, 08:50:44 AM

Hello! purse not synchronous, stillte. Exe on such shows:
INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:302 [89.177.121.94:20188 OUT] Sync data returned a new top block candidate: 67598 -> 110946 [Your node is 43348 blocks (30 days) behind]

This info is normal, it was syncing your wallet and had received a new top block height 110946.
Your sync is now at height 67598 from 110946. Sync can take 1 hour or more depend of cpu and lan/wlan.

If it stop sync delete all files in C:\ProgramData\stellite and try again.

If anything change and can't sync please in the CLI Wallet folder, create a .bat file and place following commands in it:

Code:
stellite-wallet-cli.exe --restore-deterministic-wallet

save and start the .bat file.

It will ask you to name your restored wallet, set a new password and type in the seed key of 25 words.

When launching simple wallet afterwards, it will receive blocks and your balance will be shown.

Now you have a new wallet syncked from block 0 and can continue with CLI Wallet or open it in GUI Wallet.

Topic: [ANN][POW] 👾Torque👾 - decentralized node list via IPFS & ZeroNet - page 47. (Read 87266 times)