[ANN][SKUNKHASH] Magnatum - Signatum Fork - Unique Feature - Bounty 2 On - page 28.

freedom_io

member

Activity: 105

Merit: 10

quarkchain.io

Soon AltCommunityCoin will be Skunk. And it looks a lot better.

SuperNovah90

full member

Activity: 378

Merit: 101

Quote from: _javi_ on August 30, 2017, 01:23:05 PM

Quote from: SuperNovah90 on August 30, 2017, 01:03:16 PM

I have earned several coins through a pool on my wallet address, but I can see zero balance when I run the wallet client, though the pool's webpage shows digits linked to my address. WTF? Angry

P.S. Everything looks synchronized.

have you made a withdraw from the pool? Wink

Hehe, nice try bro Grin

Well, finally it payed out automatically, the problem's solved. False alarm

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

Quote from: SuperNovah90 on August 30, 2017, 01:03:16 PM

I have earned several coins through a pool on my wallet address, but I can see zero balance when I run the wallet client, though the pool's webpage shows digits linked to my address. WTF? Angry

P.S. Everything looks synchronized.

have you made a withdraw from the pool? Wink

SuperNovah90

full member

Activity: 378

Merit: 101

I have earned several coins through a pool on my wallet address, but I can see zero balance when I run the wallet client, though the pool's webpage shows digits linked to my address. WTF? Angry

P.S. Everything looks synchronized.

firesec

full member

Activity: 182

Merit: 104

Knowledge must be free !

Quote from: Thergud on August 30, 2017, 10:24:16 AM

Quote from: erikzwc on August 30, 2017, 10:16:40 AM

Quote from: faustcollect on August 30, 2017, 02:13:46 AM

How to mine magnatum solo (for Windows).

Download and install the last ver. of the wallet here: http://magnatum.io/. Do not start it yet.

Create the configuration file here:

Code:

c:\users\%username%\AppData\Roaming\Magnatum

Name it magnatum.conf
Its content:
--

Code:

server=1
listen=1
daemon=1
gen=0
rpcuser=YOUR_USERNAME
rpcpassword=YOUR_PASS
rpcallowip=*
rpcport=33334

--
The fields YOUR_USERNAME and YOUR_PASS shouldn't be the same word.

Save the file.
Go to the miner folder and make the start.bat file.
I use the x64 ccminer so the example is for it.
start.bat file content:
--

Code:

:loop
ccminer64.exe -a skunk -o http://127.0.0.1:33334 -u YOUR_USERNAME -p YOUR_PASS -i 25
goto loop

Your "i" parameter might be different.

Start the wallet. Wait till it'll be synchronised.
Start your solo mining bat file.

Good luck! Wink

Hey I just started learning about mining today, I have a few questions.

1. How do I sync my windows wallet? How do I know it is synced?
2. I followed your steps and on cc miner it says
Accepted: 9/9 436.27 H/s yes!
every few min and number keeps getting bigger, does that mean I am successfully mining them?
If so how do I get them into my wallet as my wallet says I have 0.
3. Do I need to create an account somewhere for these coins?
4. Can you also please make a guide to join one of these mining pools with other people?

Thanks for the solo guide btw!

You're gonna want to mine in a pool or you probably won't get much return. Go here to start: https://mgt.suprnova.cc/index.php?page=gettingstarted

Yeah, if you have like at least 1% from the total network hashrate you can think about solo mining although you should expect a block at a few hours .. and this depends a lot how lucky you are. Of course if the network hashrate is growing very fast you're not in good shape

DarkTrollCoin

full member

Activity: 226

Merit: 103

Quote from: ntrader on August 30, 2017, 06:04:41 AM

Quote from: Rashkae on August 30, 2017, 05:08:50 AM

Your logo... looks like 4... uhm...

4 tits, right

Took'em in plain face while opening the page Grin

saiDaMinhaAba

newbie

Activity: 20

Merit: 0

do u need portuguese translate?
Pls reserve o/\o

seventux

newbie

Activity: 79

Merit: 0

i think it has future when some big pools backup..set up my miners there..

Thergud

newbie

Activity: 59

Merit: 0

Quote from: erikzwc on August 30, 2017, 10:16:40 AM

Quote from: faustcollect on August 30, 2017, 02:13:46 AM

How to mine magnatum solo (for Windows).

Download and install the last ver. of the wallet here: http://magnatum.io/. Do not start it yet.

Create the configuration file here:

Code:

c:\users\%username%\AppData\Roaming\Magnatum

Name it magnatum.conf
Its content:
--

Code:

server=1
listen=1
daemon=1
gen=0
rpcuser=YOUR_USERNAME
rpcpassword=YOUR_PASS
rpcallowip=*
rpcport=33334

--
The fields YOUR_USERNAME and YOUR_PASS shouldn't be the same word.

Save the file.
Go to the miner folder and make the start.bat file.
I use the x64 ccminer so the example is for it.
start.bat file content:
--

Code:

:loop
ccminer64.exe -a skunk -o http://127.0.0.1:33334 -u YOUR_USERNAME -p YOUR_PASS -i 25
goto loop

Your "i" parameter might be different.

Start the wallet. Wait till it'll be synchronised.
Start your solo mining bat file.

Good luck! Wink

Hey I just started learning about mining today, I have a few questions.

1. How do I sync my windows wallet? How do I know it is synced?
2. I followed your steps and on cc miner it says
Accepted: 9/9 436.27 H/s yes!
every few min and number keeps getting bigger, does that mean I am successfully mining them?
If so how do I get them into my wallet as my wallet says I have 0.
3. Do I need to create an account somewhere for these coins?
4. Can you also please make a guide to join one of these mining pools with other people?

Thanks for the solo guide btw!

You're gonna want to mine in a pool or you probably won't get much return. Go here to start: https://mgt.suprnova.cc/index.php?page=gettingstarted

hous26

full member

Activity: 462

Merit: 115

This looks terrible but its getting support so i dont even know. My gut tells me not to waste my electricity mining it but...

erikzwc

newbie

Activity: 1

Merit: 0

Quote from: faustcollect on August 30, 2017, 02:13:46 AM

How to mine magnatum solo (for Windows).

Download and install the last ver. of the wallet here: http://magnatum.io/. Do not start it yet.

Create the configuration file here:

Code:

c:\users\%username%\AppData\Roaming\Magnatum

Name it magnatum.conf
Its content:
--

Code:

server=1
listen=1
daemon=1
gen=0
rpcuser=YOUR_USERNAME
rpcpassword=YOUR_PASS
rpcallowip=*
rpcport=33334

--
The fields YOUR_USERNAME and YOUR_PASS shouldn't be the same word.

Save the file.
Go to the miner folder and make the start.bat file.
I use the x64 ccminer so the example is for it.
start.bat file content:
--

Code:

:loop
ccminer64.exe -a skunk -o http://127.0.0.1:33334 -u YOUR_USERNAME -p YOUR_PASS -i 25
goto loop

Your "i" parameter might be different.

Start the wallet. Wait till it'll be synchronised.
Start your solo mining bat file.

Good luck! Wink

Hey I just started learning about mining today, I have a few questions.

1. How do I sync my windows wallet? How do I know it is synced?
2. I followed your steps and on cc miner it says
Accepted: 9/9 436.27 H/s yes!
every few min and number keeps getting bigger, does that mean I am successfully mining them?
If so how do I get them into my wallet as my wallet says I have 0.
3. Do I need to create an account somewhere for these coins?
4. Can you also please make a guide to join one of these mining pools with other people?

Thanks for the solo guide btw!

Thergud

newbie

Activity: 59

Merit: 0

Over 600 workers on suprnova already.

SwaveyMane

newbie

Activity: 45

Merit: 0

coin sounds interesting im a noobie aswell but this is my first bitcointalk account. Sad

i wish i could get my post up why im looking around at new coins. i might try to mine it. i dont seem to have much power on amd, apu kaveri 6gpu cores processer in my desktop:(

firesec

full member

Activity: 182

Merit: 104

Knowledge must be free !

sounds like rpc port was not set .. or you have to restart the wallet .. you can check with netstat -na to see if it's listening on that rpc port specified

known-user

member

Activity: 87

Merit: 10

Quote from: faustcollect on August 30, 2017, 03:47:57 AM

Quote from: mystere_miner on August 30, 2017, 03:10:25 AM

Hmmm.. how are you getting this to work with ccminer? My understanding is that the current wallet doesn't support getwork anymore because it's based on a later version of the qt wallet, and ccminer only supports getwork. I've also read the the asterisks are no longer supported either in the rpcallowip field.

When I follow your advice, I get:

HTTP request failed: Recv failure: Connection was reset
get_work failed, retry after 30 seconds

I had the same error message, but when I updated the wallet the message disappeared and the solo mining started.
Btw, I'm using ccminer skunksp-mod8.
I've just checked and it works fine. Here is the log:

Code:

C:\Users\test\Magnatum\skunksp-mod8>ccminer64.exe -a skunk -d 0 -o http://127.0.0.1:33334 -u user -p password -i 25
*** ccminer SkunkSPmod8 for nVidia GPUs from alexis78@github ***
*** Built with VC++ 2013 and nVidia CUDA SDK 7.

*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.

[2017-08-30 16:43:00] NVML GPU monitoring enabled.
[2017-08-30 16:43:00] 1 miner thread started, using 'skunk' algorithm.
[2017-08-30 16:43:00] skunk block 11725, diff 1359.66, net 149.74GH/s
[2017-08-30 16:43:04] GPU#0:Intensity set to 25, 33554432 cuda threads
[2017-08-30 16:43:45] GPU#0:Gigabyte GTX 1060 6GB, 18.13MH/s

UPD:
As for the asterisks, I tried IP-address, but it didn't work, so I used * and it worked.

i have downloaded the latest wallet, followed all steps.

i'm getting the following error result:
HTTP request failed: Recv failure: Connection was reset
get_work failed, retry after 30 seconds

is there maybe any setting in windows to be made to be able to make solo mining work?

maddy988

newbie

Activity: 8

Merit: 0

now magnatum. waiting for "Oligarchium"

ntrader

full member

Activity: 264

Merit: 101

Quote from: Rashkae on August 30, 2017, 05:08:50 AM

Your logo... looks like 4... uhm...

4 tits, right

Bitzure

newbie

Activity: 28

Merit: 0

Quote from: }{uNdd on August 30, 2017, 05:26:45 AM

Quote from: Bitzure on August 30, 2017, 05:18:29 AM

Quote from: }{uNdd on August 30, 2017, 05:09:13 AM

Quote from: ?? on ??

Hi everyone!

Magnatum has been added to Bitzure!
Bitzure is a new exchange made by traders for the traders and are actively looking at new digital currencies to add!

https://bitzure.com/markets/mgtbtc
https://bitzure.com/funds#/deposits/mgt

Quick Links:

is that too fast to put at the exchange ? whitepaper and explorer havent out

There is an explorer and also the amount we saw mining showed us there is some interest in the currency. Whether you would like to trade it is up to you.

where can you find the block explorer?
i saw in the 1st page will build in 2days

We found it at http://explorer.magnatum.io

mez

full member

Activity: 197

Merit: 100

premined shit show

longtune

newbie

Activity: 5

Merit: 0

Quote from: tsaroz on August 30, 2017, 05:20:25 AM

A fork of a struggling to be POS coin with unlimited supply.
There not much profit to expect from here.

Yes! I will not waste time on mining this shit~

Topic: [ANN][SKUNKHASH] Magnatum - Signatum Fork - Unique Feature - Bounty 2 On - page 28. (Read 70767 times)