[ANN][SLR] SolarCoin | PoW to PoS v. 2.0 | Solar Proof of Generation (§1 = 1MWh) - page 217.

user_fred

member

Activity: 95

Merit: 10

Hi, I have just noticed the staking amount is reseted to a larger amount after closing the wallet , like it is optimizing the staking amount.
Why is it not doing it automaticaly ? and why should i have to close QT to optimize?
Large amount of interest is just incredible, i would have never imagined is could be so high at the beginning , i was not aware we had to be there at the 1st minutes of the transition , i am lucky .. there was just between 16 and 19 connexions at the transition ...and this morning we were 6 !

biodieselchris

hero member

Activity: 579

Merit: 500

CoinQuacker

linux (Ubuntu 14.04 LTS) wallet install didn't work for me

"./SolarCoin_2.0.1_32bit.run: 1: eval: ./solarcoin-qt not found"

corather

legendary

Activity: 1708

Merit: 1000

Solarcoin.org

Quote from: Epiphany on September 21, 2015, 08:14:45 PM

Quote from: onsightit on September 21, 2015, 07:58:21 PM

Quote from: Epiphany on September 21, 2015, 07:38:18 PM

I'm unable to import the private key from paper wallets that I did up last year.

I went into the console and used the function importprivkey followed by the private key and got an error saying:

Wallet is unlocked for staking only (code -13)

Any help would be appreciated!

Try Settings -> Disable Staking. Then go to Help -> Console and enter "walletpassphrase {your passphrase} 9999999 true"

Then try importing.

-Steve

When I do that command, as you indicated, it says: Error: Error parsing JSON table

The command has to look exactly like this for windows wallets:

walletpassphrase 'your passphrase' 9999999 true

y_virtual

sr. member

Activity: 377

Merit: 251

Note to self: it's not you doing it, it's us.

Quote from: onsightit on September 21, 2015, 06:31:54 PM

Quote from: solarcoiner on September 21, 2015, 05:48:23 PM

I think I found a valid block, going to have to wait 500 more blocks untill i know for sure.

My wallet quit unexpectedly so I had to restart it. now it says: In sync, not staking, earning stake time.
What exactly does that mean?

You will see "earning stake time" if your weight is low, or if your coins are newer than 8 hours old. You can see the age of your coins by turning on "Coin Control" in Settings->Options->Display, then going to the Send page and clicking the new "Inputs" button. Expand the tree view for an address, and you can see the date the coin was received. The date is reset whenever you mine a new block with those coins.

-Steve

"The date is reset whenever you mine a new block with those coins." - an important question here: is the date reset after 510 confirms? Non of the coins in this particular wallet has that date reset so far, even though large chunks of coins already mined 3 blocks, and got EXTREMELY large rewards in interest. Now, interests are in the process of being confirmed; one of them already has 22 confirms, one 7, one 6, but the dates have NOT been reset. So does it mean the same coins are being re-used for staking, just because the interest they generated has not reached 510 confirms?
Thanks!

y_virtual

sr. member

Activity: 377

Merit: 251

Note to self: it's not you doing it, it's us.

Also is it normal for the Spendable stat to go down? It did get back to the initial amount eventually though, but I was wondering when/why exactly that would happen.

y_virtual

sr. member

Activity: 377

Merit: 251

Note to self: it's not you doing it, it's us.

Quote from: onsightit on September 21, 2015, 10:35:04 PM

Quote from: vipgelsi on September 21, 2015, 09:45:13 PM

question we are earning lets say 2% to 8% interest a year. then how does someone get 10,000 solarcoins in one block? all in one lump sum? By dumb luck?

Thanks.

Current interest rate is *very* high, but it will get closer to 4% in a couple days.

High, you mean like ... 370%? I got really unbelievable amounts....

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

Quote from: vipgelsi on September 21, 2015, 09:45:13 PM

question we are earning lets say 2% to 8% interest a year. then how does someone get 10,000 solarcoins in one block? all in one lump sum? By dumb luck?

Thanks.

Current interest rate is *very* high, but it will get closer to 4% in a couple days.

vipgelsi

legendary

Activity: 1736

Merit: 1001

question we are earning lets say 2% to 8% interest a year. then how does someone get 10,000 solarcoins in one block? all in one lump sum? By dumb luck?

Thanks.

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

Quote from: Epiphany on September 21, 2015, 08:14:45 PM

Quote from: onsightit on September 21, 2015, 07:58:21 PM

Quote from: Epiphany on September 21, 2015, 07:38:18 PM

I'm unable to import the private key from paper wallets that I did up last year.

I went into the console and used the function importprivkey followed by the private key and got an error saying:

Wallet is unlocked for staking only (code -13)

Any help would be appreciated!

Try Settings -> Disable Staking. Then go to Help -> Console and enter "walletpassphrase {your passphrase} 9999999 true"

Then try importing.

-Steve

When I do that command, as you indicated, it says: Error: Error parsing JSON table

Hmmm, works for me. Enter without quotes: walletpassphrase {your passphrase} 9999999 true

Where {your passphrase} is your password without the brackets.

-Steve

Epiphany

sr. member

Activity: 406

Merit: 250

Quote from: onsightit on September 21, 2015, 07:58:21 PM

Quote from: Epiphany on September 21, 2015, 07:38:18 PM

I'm unable to import the private key from paper wallets that I did up last year.

I went into the console and used the function importprivkey followed by the private key and got an error saying:

Wallet is unlocked for staking only (code -13)

Any help would be appreciated!

Try Settings -> Disable Staking. Then go to Help -> Console and enter "walletpassphrase {your passphrase} 9999999 true"

Then try importing.

-Steve

When I do that command, as you indicated, it says: Error: Error parsing JSON table

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

We need a few more 1.5 wallets to upgrade so we keep this train rolling. Otherwise, we will have periods of long delays between blocks for the next day or two.

-Steve

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

Quote from: Epiphany on September 21, 2015, 07:38:18 PM

I'm unable to import the private key from paper wallets that I did up last year.

I went into the console and used the function importprivkey followed by the private key and got an error saying:

Wallet is unlocked for staking only (code -13)

Any help would be appreciated!

Try Settings -> Disable Staking. Then go to Help -> Console and enter "walletpassphrase {your passphrase} 9999999 true"

Then try importing.

-Steve

solarcoiner

sr. member

Activity: 445

Merit: 250

Quote from: onsightit on September 21, 2015, 07:06:31 PM

Quote from: solarcoiner on September 21, 2015, 06:52:13 PM

Im still not sure i have have generated a block... In the history tab i have a transaction with the solarcoin logo and it says interest. However it doesn't show up under unconfirmed in the overview tab! Also its a rather large tansaction, I cant imagine i just found a 50k Slr block that would be crazy wouldnt it?

If you double-click on the transaction in the History panel, how many confirmations has it received? More than 0 and you should be on your way to being 50k "richer". Otherwise, it was a stale block and you will have to wait until you mine another block. The age of your coins was not reset, so it should not take long.

Edit: Interest is high now while inflation is low, so large payouts are normal the first day or two.

-Steve

Thanks for the clarification!
I'm still not sure if I understand how POST works...where do these coins come from? How many coins new coins will be generated in the next couple of days? doesnt that mean solarcoin will go down in value if everyone is getting huge rewards?

Epiphany

sr. member

Activity: 406

Merit: 250

I'm unable to import the private key from paper wallets that I did up last year.

I went into the console and used the function importprivkey followed by the private key and got an error saying:

Wallet is unlocked for staking only (code -13)

Any help would be appreciated!

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

Quote from: solarcoiner on September 21, 2015, 06:52:13 PM

Im still not sure i have have generated a block... In the history tab i have a transaction with the solarcoin logo and it says interest. However it doesn't show up under unconfirmed in the overview tab! Also its a rather large tansaction, I cant imagine i just found a 50k Slr block that would be crazy wouldnt it?

If you double-click on the transaction in the History panel, how many confirmations has it received? More than 0 and you should be on your way to being 50k "richer". Otherwise, it was a stale block and you will have to wait until you mine another block. The age of your coins was not reset, so it should not take long.

Edit: Interest is high now while inflation is low, so large payouts are normal the first day or two.

-Steve

solarcoiner

sr. member

Activity: 445

Merit: 250

Im still not sure i have have generated a block... In the history tab i have a transaction with the solarcoin logo and it says interest. However it doesn't show up under unconfirmed in the overview tab! Also its a rather large tansaction, I cant imagine i just found a 50k Slr block that would be crazy wouldnt it?

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

Quote from: solarcoiner on September 21, 2015, 05:48:23 PM

I think I found a valid block, going to have to wait 500 more blocks untill i know for sure.

My wallet quit unexpectedly so I had to restart it. now it says: In sync, not staking, earning stake time.
What exactly does that mean?

You will see "earning stake time" if your weight is low, or if your coins are newer than 8 hours old. You can see the age of your coins by turning on "Coin Control" in Settings->Options->Display, then going to the Send page and clicking the new "Inputs" button. Expand the tree view for an address, and you can see the date the coin was received. The date is reset whenever you mine a new block with those coins.

-Steve

onsightit

sr. member

Activity: 308

Merit: 250

truth=(true?true:false);

All,

It may be a couple of days before the network reaches an equilibrium. The "Staking" stat on the Overview page will likely start showing values after a successful block has been submitted. Mine is already show X coins staking.

Please go to the History page to see incoming interest transactions which represents your contribution of a new block on the blockchain, and the interest earned for "mining" the block.

The current interest rate is starting to come down, and inflation is starting to rise, so give it a little more time. Thanks everyone for your feedback!

Edit: Also, the block rate per hour will increase over the next couple of days, eventually hovering around 60 per hour (one per minute).

-Steve

solarcoiner

sr. member

Activity: 445

Merit: 250

I think I found a valid block, going to have to wait 500 more blocks untill i know for sure.

My wallet quit unexpectedly so I had to restart it. now it says: In sync, not staking, earning stake time.
What exactly does that mean?

roislecxe

newbie

Activity: 5

Merit: 0

I'm waiting now for 2 hours for something to happen, but I don't see anything. Except an icon that sais 'staking' and a percentage that goes to 99% and then back down. And some text that the expected time to earn interest is 2 seconds and the blockexpolorer is at 830073.
I have closed and reopened the wallet, did not help.
The latest transaction towards my wallet was this morning at 10.59hr. (It's now 23.49pm)

Staking is 0.00 Solar and Unconfirmed also 0.00.

Am i doing something wrong?

Topic: [ANN][SLR] SolarCoin | PoW to PoS v. 2.0 | Solar Proof of Generation (§1 = 1MWh) - page 217. (Read 466822 times)