Pages:
Author

Topic: [ANN][SRC] Securecoin | A Fast and Secure Version of Bitcoin | 2013 - page 43. (Read 195580 times)

member
Activity: 108
Merit: 10
Why isn't there a securecoin.conf either listed on the first page or included with the zip file?
Then I would at least know that the conf is OK.

They probably don't bundle the conf files because they go in such a different location.

Your best bet if you're still having issues is to manually run the addnode commands via the debug console:
Code:
addnode IPADDRESS add

Also try turning off your firewall, it may be limiting you.

Thanks for the tips, but they did not help me.

The conf file should be at least listed on the front page.

did you not see, that the dev dont want you to mine as long the diff is relativly low. F**ing instaminer thing. this one is a scam too!
full member
Activity: 138
Merit: 100
Why isn't there a securecoin.conf either listed on the first page or included with the zip file?
Then I would at least know that the conf is OK.

They probably don't bundle the conf files because they go in such a different location.

Your best bet if you're still having issues is to manually run the addnode commands via the debug console:
Code:
addnode IPADDRESS add

Also try turning off your firewall, it may be limiting you.

Thanks for the tips, but they did not help me.

The conf file should be at least listed on the front page.
full member
Activity: 138
Merit: 100
Also try turning off your firewall, it may be limiting you.

Yes, on Win open ports 12567 and 12568 and also allow securecoin-qt.exe (run firewall.cpl to edit settings)


Firewall has not been a problem with the 60 other wallets I have installed so far.
No firewall and still no connections...
legendary
Activity: 2674
Merit: 2965
Terminated.
hero member
Activity: 822
Merit: 1002
Also try turning off your firewall, it may be limiting you.

Yes, on Win open ports 12567 and 12568 and also allow securecoin-qt.exe (run firewall.cpl to edit settings)
full member
Activity: 168
Merit: 100
Why isn't there a securecoin.conf either listed on the first page or included with the zip file?
Then I would at least know that the conf is OK.

They probably don't bundle the conf files because they go in such a different location.

Your best bet if you're still having issues is to manually run the addnode commands via the debug console:
Code:
addnode IPADDRESS add

Also try turning off your firewall, it may be limiting you.
hero member
Activity: 822
Merit: 1002
Still cannot connect the frickin' wallet to the frickin' network, not a frickin' block even after adding the gazillion of nodes on the first post. WTF?  Angry

Why isn't there a securecoin.conf either listed on the first page or included with the zip file?
Then I would at least know that the conf is OK.

For me, one of the worst coin launches, maybe it is a fair launch for someone else...

Maybe someone of currently connected users should share his peers.dat file?
Would it help  Huh
I can do it if it will be helpful.
full member
Activity: 138
Merit: 100
Still cannot connect the frickin' wallet to the frickin' network, not a frickin' block even after adding the gazillion of nodes on the first post. WTF?  Angry

Why isn't there a securecoin.conf either listed on the first page or included with the zip file?
Then I would at least know that the conf is OK.

For me, one of the worst coin launches, maybe it is a fair launch for someone else...
hero member
Activity: 518
Merit: 500
Bitrated user: ahmedbodi.
ill have a better functioning pool soon for u guys
rpg
hero member
Activity: 728
Merit: 500
I think there is something odd with the crypto-expert.com pool, and at least for the moment I am switching away from it.
On the coinmine.pl pool, I've earned a third as much in about 20 minutes as I did in about 6 hours on crypto-expert.


second that, I'm out. Trying the other one, if it doesn't work too I'm out of SRC
hero member
Activity: 822
Merit: 1002
I think there is something odd with the crypto-expert.com pool, and at least for the moment I am switching away from it.
On the coinmine.pl pool, I've earned a third as much in about 20 minutes as I did in about 6 hours on crypto-expert.

hm, I need to try this second pool as well
sr. member
Activity: 476
Merit: 250
I think there is something odd with the crypto-expert.com pool, and at least for the moment I am switching away from it.
On the coinmine.pl pool, I've earned a third as much in about 20 minutes as I did in about 6 hours on crypto-expert.
hero member
Activity: 518
Merit: 500
Bitrated user: ahmedbodi.
can you guys give me a guideline of your hashrate's
newbie
Activity: 41
Merit: 0
sr. member
Activity: 476
Merit: 250
A few things that need to be addressed with the pool website:
The Getting Started instructions:
- Do not include "-a quark", without which noone will be able to submit shares.

Not mined quark so i dont know about that

With your instructions, people will be generating hashes based on scrypt, which will not give valid results for Securecoin, and will all be invalid.
Securecoin uses the same hashing algorithms as Quarkcoin.
People need to use -a quark with minerd, or anything other than a specialist quark miner, or they will not be able to contribute shares to your pool.
sr. member
Activity: 476
Merit: 250
a few more hashrate based fixes applied

why are the auto payments being charged .10 as in manual payments?HuhHuhHuh

I personally am not charging anything, if something is being charged then it is the securecoin network

Your site says it charges 0.1 for manual withdrawals, it seems likely that something has gone wrong and you are also charging that for automatic withdrawals. There is no general charge for sending Securecoin payments.
hero member
Activity: 518
Merit: 500
Bitrated user: ahmedbodi.
sure, its entirely up to you. im coding around 5 of the issues out eta for those is about 5 hours or so
rpg
hero member
Activity: 728
Merit: 500
a few more hashrate based fixes applied

why are the auto payments being charged .10 as in manual payments?HuhHuhHuh

I personally am not charging anything, if something is being charged then it is the securecoin network

not so sure about that, check your code. Last night had a 1 coin transfer with no charge, this morning another transaction had a charge. Your pool has way too many issues to be consider reliable. I'm considering in stop mining SRC until a reliable P2P is available
hero member
Activity: 518
Merit: 500
Bitrated user: ahmedbodi.
a few more hashrate based fixes applied

why are the auto payments being charged .10 as in manual payments?HuhHuhHuh

I personally am not charging anything, if something is being charged then it is the securecoin network
hero member
Activity: 518
Merit: 500
Bitrated user: ahmedbodi.
A few things that need to be addressed with the pool website:
The Getting Started instructions:
- Do not include "-a quark", without which noone will be able to submit shares.

Not mined quark so i dont know about that


- Say to create a Litecoin address and use it for payment, rather than a Securecoin address

I agree it needs to be changed since this is a generic frontend which hasnt had all my other pages added in


The Pool Statistics:
- Hashrate per user is wrong

Due to the nature of the custom code im using

- SRC/day is wrong (probably because hashrate is wrong)

Caused by above

- The Current Difficulty link is to a page which has no relevant information

Waiting on a block explorer

- Est. Avg. Time per Round and Est. Shares this Round are wildly wrong

Again caused by hashrate

- Linked to the above, the Block Shares graph shows nothing useful

Again caused by hashrate

- The Hashrate graph looks like it might have just started showing something

Again caused by hashrate

- The Network Hashrate is wrong

Network hashrate doesnt exist in the daemon

General lack of information:
All you can see is number of shares in current round, and total earned so far
There is no way of seeing total shares submitted, shares/hour or shares/day, or how many shares went into each block.
There is therefore noway of doing any verification about the overall figures.

Pages:
Jump to: