Cannot connect to pool now, workers just stay at connecting
Update the 8888 port would not let me connect, I had to switch to 9999
Update 2:
Viatorek,
I was home for lunch to see what was going on, and the reason my workers were sporadic showing not working when i looked at the site is because my miner at home was having on off problems with port 8888, one card wouldnt connect to it at all, one of the others would lose connection. I since connected all 3 through the original address with port 9999 and for the moment it shows all 3 cards working and a much higher hashrate on the site. For the moment it is showing 1550 to 2200 on the site
Topic: [ANN][SSL][0%FEE] DOGECOIN POOL MINE! FAST-POOL.COM - ON CORRECT FORK! - page 46. (Read 145191 times)
January 21, 2014, 12:32:20 PM
January 21, 2014, 12:12:22 PM
Please unlock account herrwizo, thank you!
January 21, 2014, 12:05:48 PM
how do you estimate random block coin?
I plug in my hashrate on coinwarz and use the calculator there. my hashrate is just over 1900, but I plug in 1800 on coinwarz to try and be conservative.
at 1800 according to coinwarz I should be averaging 727, keep in mind I used 1800 not 1900+. and 1200 in 4 hours is quite low comparitively to the 2900 that the calculator is telling me. Also when I look at the list of found blocks most of them have been pretty decent a couple of lows but also a lot of highs.
let me try explain
block is 1 - 1000 0000
coin wars counts 500 000 to make it simple...
i hope some day you will say here...i earned more then coinwarz calculation...i want to donate to pool
I understand that block is random between 1 and 1 million. and thats why i am a little conservative with coinwarz, but when I see my estimated hashrate constantly 500-700 lowers then what my system is doing I start to wonder if I am wasting effort on my end.
what can i say....i never checked coinwarz....like i say if you sending shares to us...when we hit a block...payment is made proportional....and speed is estimate from last shares....in mining sending shares is also a luck stuff....i was having same problem like you when i started mine on MPOS pools... (it was worldcoin then) but my payment was always ok..little less then coinwarz but i didnt bother.
January 21, 2014, 11:58:38 AM
how do you estimate random block coin?
I plug in my hashrate on coinwarz and use the calculator there. my hashrate is just over 1900, but I plug in 1800 on coinwarz to try and be conservative.
at 1800 according to coinwarz I should be averaging 727, keep in mind I used 1800 not 1900+. and 1200 in 4 hours is quite low comparitively to the 2900 that the calculator is telling me. Also when I look at the list of found blocks most of them have been pretty decent a couple of lows but also a lot of highs.
let me try explain
block is 1 - 1000 0000
coin wars counts 500 000 to make it simple...
i hope some day you will say here...i earned more then coinwarz calculation...i want to donate to pool
I understand that block is random between 1 and 1 million. and thats why i am a little conservative with coinwarz, but when I see my estimated hashrate constantly 500-700 lowers then what my system is doing I start to wonder if I am wasting effort on my end.
January 21, 2014, 11:56:07 AM
how do you estimate random block coin?
I plug in my hashrate on coinwarz and use the calculator there. my hashrate is just over 1900, but I plug in 1800 on coinwarz to try and be conservative.
at 1800 according to coinwarz I should be averaging 727, keep in mind I used 1800 not 1900+. and 1200 in 4 hours is quite low comparitively to the 2900 that the calculator is telling me. Also when I look at the list of found blocks most of them have been pretty decent a couple of lows but also a lot of highs.
let me try explain
block is 1 - 1000 0000
coin wars counts 500 000 to make it simple...
i hope some day you will say here...i earned more then coinwarz calculation...i want to donate to pool
edit:
dogecoin on start was named "opran factory" it was not planned to be so big
January 21, 2014, 11:55:38 AM
how do you estimate random block coin?
I plug in my hashrate on coinwarz and use the calculator there. my hashrate is just over 1900, but I plug in 1800 on coinwarz to try and be conservative.
at 1800 according to coinwarz I should be averaging 727, keep in mind I used 1800 not 1900+. and 1200 in 4 hours is quite low comparitively to the 2900 that the calculator is telling me. Also when I look at the list of found blocks most of them have been pretty decent a couple of lows but also a lot of highs.
high blocks are just bad, they must be small with a hugh amount of coins.
January 21, 2014, 11:47:58 AM
how do you estimate random block coin?
I plug in my hashrate on coinwarz and use the calculator there. my hashrate is just over 1900, but I plug in 1800 on coinwarz to try and be conservative.
at 1800 according to coinwarz I should be averaging 727, keep in mind I used 1800 not 1900+. and 1200 in 4 hours is quite low comparitively to the 2900 that the calculator is telling me. Also when I look at the list of found blocks most of them have been pretty decent a couple of lows but also a lot of highs.
January 21, 2014, 11:44:13 AM
how do you estimate random block coin?
January 21, 2014, 11:25:20 AM
anyone seeing a big difference between pool stats for their hashrate and what their system actually say. My System is doing 1915Kh/s
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
check workers speeed:
https://fast-pool.com/index.php?page=account&action=workers
and at new block countig........its new optimalization to keep payments to all 9k users
you want your earned coins right?
edit:
wow Toxic 280x 796Kh/s
i got 12x of them with 700 max...what did you do? settings voltage?
Yep have a screen shot of them as well, and i am using guiminer script or else it would be over 800. if you are getting 700 then they are under utilized. I do not know how to include a pic here from my desktop or I would to show you the hasrate. But as for setting for the toxic is as follows: vl 1.256, Clock 1160, Mem 1875, Power +20, Miner: Thread 11200, Gpu 2, Intensity 13, temp 86, but i do have 2 others cards crammed in there.
Also more so then not I get the error message i mentioned in my previous post when I try the site and a tab in the site. Also it is random with my workers sometimes shows one, sometimes two sometimes three. ie worker 1 682 worker 2 X worker 3 X. That is when I can access a tab instead of getting that error.
what are 9K users???
thanx for the conf..i need to change bios to undervolt?
9000 workers on mine now: 8956
pool see shares...so if your rig is counting share its not mentioned in workers stats...if send...then yes...
its very fast stats...most pool will show you stats from last 5-10min (you will notice it will grow slow after you start mining)
its all for fun...all we need is shares...server count them correctly everytime we find block...
all this stats are for fun and trying to count shares and change them to speed...
but once its -20% and once its +20
best stats are when we are 70-100..or more % after the block
You would be overvolting the toxis by 0.056, I use MSI Afterburner, as it allows me full access to everything on my toxics without having to mess with bios. I am just concerned as the estimate on the site is never even close to what I am actually doing and I usually dont have this problem. right now on the pool i have a little over 1200 coins in the last 4 hours. with my hashrate I should be pulling 700+ an hour in coins. I have a pic here of my hasrate but I do not know how to post it here.
January 21, 2014, 11:23:32 AM
everybody please
addnode=fast-pool.com
to your wallet .conf file
to get less opraned blocks
please do! network is 107 now!
we need more nodes know about us
January 21, 2014, 11:18:45 AM
anyone seeing a big difference between pool stats for their hashrate and what their system actually say. My System is doing 1915Kh/s
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
check workers speeed:
https://fast-pool.com/index.php?page=account&action=workers
and at new block countig........its new optimalization to keep payments to all 9k users
you want your earned coins right?
edit:
wow Toxic 280x 796Kh/s
i got 12x of them with 700 max...what did you do? settings voltage?
Yep have a screen shot of them as well, and i am using guiminer script or else it would be over 800. if you are getting 700 then they are under utilized. I do not know how to include a pic here from my desktop or I would to show you the hasrate. But as for setting for the toxic is as follows: vl 1.256, Clock 1160, Mem 1875, Power +20, Miner: Thread 11200, Gpu 2, Intensity 13, temp 86, but i do have 2 others cards crammed in there.
Also more so then not I get the error message i mentioned in my previous post when I try the site and a tab in the site. Also it is random with my workers sometimes shows one, sometimes two sometimes three. ie worker 1 682 worker 2 X worker 3 X. That is when I can access a tab instead of getting that error.
what are 9K users???
thanx for the conf..i need to change bios to undervolt?
9000 workers on mine now: 8956
pool see shares...so if your rig is counting share its not mentioned in workers stats...if send...then yes...
its very fast stats...most pool will show you stats from last 5-10min (you will notice it will grow slow after you start mining)
its all for fun...all we need is shares...server count them correctly everytime we find block...
all this stats are for fun and trying to count shares and change them to speed...
but once its -20% and once its +20
best stats are when we are 70-100..or more % after the block
January 21, 2014, 11:09:03 AM
anyone seeing a big difference between pool stats for their hashrate and what their system actually say. My System is doing 1915Kh/s
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
check workers speeed:
https://fast-pool.com/index.php?page=account&action=workers
and at new block countig........its new optimalization to keep payments to all 9k users
you want your earned coins right?
edit:
wow Toxic 280x 796Kh/s
i got 12x of them with 700 max...what did you do? settings voltage?
Yep have a screen shot of them as well, and i am using guiminer script or else it would be over 800. if you are getting 700 then they are under utilized. I do not know how to include a pic here from my desktop or I would to show you the hasrate. But as for setting for the toxic is as follows: vl 1.256, Clock 1160, Mem 1875, Power +20, Miner: Thread 11200, Gpu 2, Intensity 13, temp 86, but i do have 2 others cards crammed in there.
Also more so then not I get the error message i mentioned in my previous post when I try the site and a tab in the site. Also it is random with my workers sometimes shows one, sometimes two sometimes three. ie worker 1 682 worker 2 X worker 3 X. That is when I can access a tab instead of getting that error.
what are 9K users???
January 21, 2014, 10:54:30 AM
anyone seeing a big difference between pool stats for their hashrate and what their system actually say. My System is doing 1915Kh/s
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
check workers speeed:
https://fast-pool.com/index.php?page=account&action=workers
and at new block countig........its new optimalization to keep payments to all 9k users
you want your earned coins right?
edit:
wow Toxic 280x 796Kh/s
i got 12x of them with 700 max...what did you do? settings voltage?
January 21, 2014, 10:50:09 AM
anyone seeing a big difference between pool stats for their hashrate and what their system actually say. My System is doing 1915Kh/s
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
Toxic 280x 796Kh/s, Diamond 280x 707Kh/s, Sapphire 7870 412Kh/s.. But the site is showing anywhere from 600Kh/s to 1300+Kh/s no where near what I am actually doing and this is beginning to discourage me as Other sites I mine show me between 1600-2200 never as low as these stats. If I cannot be sure my cards are being utilized fully I cannot remain here.
Edit: Also the site is randomly down telling me the following:
Fast-Pool.com
New block(s) is counting and(/or) database clean up is running ... please wait few second and refresh
Shares incoming, stratum is running... only web interface is locked for better and faster count all work
hashrate:10.1714 gh/s
what is up with this
January 21, 2014, 10:44:37 AM
REGISTRATION CLOSED
you are elite now
you are elite now
will there come new servers for furder expantion or are you just keep it this big.
we already have new server deliverd 2h ago...now we thinking what to do...ad stratum or open second mine...
like fast-pool2.com
hmmm I would think of just make this pool bigger.
and for all the stratums that they splitt the work over the servers witch one is less loaded.
that is what I would do.
January 21, 2014, 10:41:32 AM
Hello viatorek.
I noticed that now the pool's total hashrate is fluctuating between 9 and 15 GHash/s.
Is it because of a dirty guy pool hopper?
I noticed that now the pool's total hashrate is fluctuating between 9 and 15 GHash/s.
Is it because of a dirty guy pool hopper?
nah its becouse my new gay stats script...but it not taking server resources....so its great
we are 10-11gh now
January 21, 2014, 10:40:40 AM
REGISTRATION CLOSED
you are elite now
you are elite now
will there come new servers for furder expantion or are you just keep it this big.
we already have new server deliverd 2h ago...now we thinking what to do...ad stratum or open second mine...
like fast-pool2.com
January 21, 2014, 10:40:12 AM
Hello viatorek.
I noticed that now the pool's total hashrate is fluctuating between 9 and 15 GHash/s.
Is it because of a dirty guy pool hopper?
I noticed that now the pool's total hashrate is fluctuating between 9 and 15 GHash/s.
Is it because of a dirty guy pool hopper?
January 21, 2014, 10:34:08 AM
REGISTRATION CLOSED
you are elite now
you are elite now
will there come new servers for furder expantion or are you just keep it this big.
January 21, 2014, 10:28:11 AM
REGISTRATION CLOSED
you are elite now
you are elite now
Jump to: