Pages:
Author

Topic: [ANN][SSL][0%FEE] DOGECOIN POOL MINE! FAST-POOL.COM - ON CORRECT FORK! - page 57. (Read 145258 times)

full member
Activity: 168
Merit: 100
Not trying to be a jerk, just trying to get everything as optimal as possible atm.

Issues:
I have about 22,000 kh/s connected with 0.5% rejection and 1.2% stales.
The dashboard randomly falls to 11,000 kh/s is it reporting accurate? before the "optimization" that took place yesterday I was having 18900~22,000 kh/s reported constant on the dash.

Also estimates place me at around 420,000 to 470,000 doge/day yet i am only getting about on average 350,000 ~360,000 doge/day, is there anything I can do to close the gap?...considering trying other pools because 50~70k missing doge (20$) a day or so is quite a loss, considering such low rejection/stales, i should only be loosing about 10,000~15,000 doge a day to in-efficiency by my estimates.... somehow somewhere im losing between 10 and 15% efficiency, i might as well try and find other pools and put 15% of my cards to mine something else lol......... because switching more computers on doesn't even appear to positively increase my hash rate on fast-pool....doesn't make any sense. I added 6 cards since yesterday and im still mining at about the same rate I was without those cards......and the difficulty dropped overnight , didn't increase.

Also how many shares/s should 22,000 kh/s give you ? on average? high and low?
On the dash the meter for shares/s jumps anywhere from 1.88 ~ 3.5 shares/s.... I have almost no reliable metrics other than my own front-end to work with, the fast-pool dash might as well be spitting out random numbers 0o cause the metrics are so volatile.

I don't think its a heat or power issue, since these cards are all in a refrigerated room essentially and everything is cooled down to 70c operating under load.... power should be fine, 1300w psu for only about 820w draw per computer at the moment.


Whats the best way to have workers setup for accurate reporting? one worker for 30 cards or 1 for each card? im using a single worker per card atm in expectation that worker stats some-day come back on and I can monitor individual card performance. (running multiple instances of cgminer per computer)


Thank you for any reply/input.
PS:
Also, the way I managed to get such low rejection / stales was by tweaking around with the expiry setting, Im sitting at around 200% discards 0.4~0.5 rejections and 1.2~1.4% stales atm , is this good or should I just dump all the settings and focus on hash-rate in cgminer, because I can get every card to report 750/450 kh/s but the old front-end would say I was hashing SLOWER even tho CGMINER said it was faster......... it seems that the front end focuses on shares/s and cgminer focuses on operating speed giving you false readings (kh/s is deceptive because high kh/s doesn't seem to always translate into high shares/s submitted).

Thanks.


i know what you mean couse i have 10mh/s rig mining here and after optimalization it shows 2-10 mhz.....it will be fixed in weekend too...i hope....its still counts shares correctly but showing you speed from last 5 seconds for about 60 seconds after the block workers/global speed....longer time was killling machine and pool speed was 0 for this 60 seconds after the block.

pool is always seeing share's...and its a luck sometimes it sends more sometimes is less...buts its always in the end...100%
and doge is random block value coin so if you want to compare pools you need to mine 1 month minimum then you can say "losing between 10 and 15% efficiency".

in the other pools your speed is 5-10min so its fake to make good stats and dont have questions like this in support thread/emails...
but try turn off all workers...your delay will be like 5-10min....why? you dont send shares but its still shows you are mining? wtf? its a waste Smiley you want to react fast when your rig is down.

if your cgminers shows 700 and you have 1% rejects...there is no option to manipulate that...you sended x shares....and belive me its counted right (add all and check in dashboard it will be send).

we planing to rewrite alll this system in weekend so dont focus on that....but yes its shows your true speed from last 5 seconds and this is how mining works....but there was many questions from people so they make it not real...maybe we gonne back to that.

p.s.

we have biggest doge miners here 460/120/100/80 mh giant gpu fatorys are mining with us...why couse we have low rejection and best efficienty right now....if not they will just go away

and one more thing we are PROPORIONAL (PPLNS SUXXXX) so we dont steal your shares like other pools,read about it before compare pools Smiley


You are right I really didn't take into account long-term variance.
How many shares/s do you get with 10mh/s?
sr. member
Activity: 350
Merit: 250
Not trying to be a jerk, just trying to get everything as optimal as possible atm.

Issues:
I have about 22,000 kh/s connected with 0.5% rejection and 1.2% stales.
The dashboard randomly falls to 11,000 kh/s is it reporting accurate? before the "optimization" that took place yesterday I was having 18900~22,000 kh/s reported constant on the dash.

Also estimates place me at around 420,000 to 470,000 doge/day yet i am only getting about on average 350,000 ~360,000 doge/day, is there anything I can do to close the gap?...considering trying other pools because 50~70k missing doge (20$) a day or so is quite a loss, considering such low rejection/stales, i should only be loosing about 10,000~15,000 doge a day to in-efficiency by my estimates.... somehow somewhere im losing between 10 and 15% efficiency, i might as well try and find other pools and put 15% of my cards to mine something else lol......... because switching more computers on doesn't even appear to positively increase my hash rate on fast-pool....doesn't make any sense. I added 6 cards since yesterday and im still mining at about the same rate I was without those cards......and the difficulty dropped overnight , didn't increase.

Also how many shares/s should 22,000 kh/s give you ? on average? high and low?
On the dash the meter for shares/s jumps anywhere from 1.88 ~ 3.5 shares/s.... I have almost no reliable metrics other than my own front-end to work with, the fast-pool dash might as well be spitting out random numbers 0o cause the metrics are so volatile.

I don't think its a heat or power issue, since these cards are all in a refrigerated room essentially and everything is cooled down to 70c operating under load.... power should be fine, 1300w psu for only about 820w draw per computer at the moment.


Whats the best way to have workers setup for accurate reporting? one worker for 30 cards or 1 for each card? im using a single worker per card atm in expectation that worker stats some-day come back on and I can monitor individual card performance. (running multiple instances of cgminer per computer)


Thank you for any reply/input.
PS:
Also, the way I managed to get such low rejection / stales was by tweaking around with the expiry setting, Im sitting at around 200% discards 0.4~0.5 rejections and 1.2~1.4% stales atm , is this good or should I just dump all the settings and focus on hash-rate in cgminer, because I can get every card to report 750/450 kh/s but the old front-end would say I was hashing SLOWER even tho CGMINER said it was faster......... it seems that the front end focuses on shares/s and cgminer focuses on operating speed giving you false readings (kh/s is deceptive because high kh/s doesn't seem to always translate into high shares/s submitted).

Thanks.


i know what you mean couse i have 10mh/s rig mining here and after optimalization it shows 2-10 mhz.....it will be fixed in weekend too...i hope....its still counts shares correctly but showing you speed from last 5 seconds for about 60 seconds after the block workers/global speed....longer time was killling machine and pool speed was 0 for this 60 seconds after the block.

pool is always seeing share's...and its a luck sometimes it sends more sometimes is less...buts its always in the end...100%
and doge is random block value coin so if you want to compare pools you need to mine 1 month minimum then you can say "losing between 10 and 15% efficiency".

in the other pools your speed is 5-10min so its fake to make good stats and dont have questions like this in support thread/emails...
but try turn off all workers...your delay will be like 5-10min....why? you dont send shares but its still shows you are mining? wtf? its a waste Smiley you want to react fast when your rig is down.

if your cgminers shows 700 and you have 1% rejects...there is no option to manipulate that...you sended x shares....and belive me its counted right (add all and check in dashboard it will be send).

we planing to rewrite alll this system in weekend so dont focus on that....but yes its shows your true speed from last 5 seconds and this is how mining works....but there was many questions from people so they make it not real...maybe we gonne back to that.

p.s.

we have biggest doge miners here 460/120/100/80 mh giant gpu fatorys are mining with us...why couse we have low rejection and best efficienty right now....if not they will just go away

and one more thing we are PROPORIONAL (PPLNS SUXXXX) so we dont steal your shares like other pools,read about it before compare pools Smiley
sr. member
Activity: 350
Merit: 250
Should worker stats be back soon ?

Looking to move my 11,000 khash over but hard to keep an eye on all my workers without that.

yes we planing to fix that in weekend...i hope we can make it
full member
Activity: 168
Merit: 100
Not trying to be a jerk, just trying to get everything as optimal as possible atm.

Issues:
I have about 22,000 kh/s connected with 0.5% rejection and 1.2% stales.
The dashboard randomly falls to 11,000 kh/s is it reporting accurate? before the "optimization" that took place yesterday I was having 18900~22,000 kh/s reported constant on the dash.

Also estimates place me at around 420,000 to 470,000 doge/day yet i am only getting about on average 350,000 ~360,000 doge/day, is there anything I can do to close the gap?...considering trying other pools because 50~70k missing doge (20$) a day or so is quite a loss, considering such low rejection/stales, i should only be loosing about 10,000~15,000 doge a day to in-efficiency by my estimates.... somehow somewhere im losing between 10 and 15% efficiency, i might as well try and find other pools and put 15% of my cards to mine something else lol......... because switching more computers on doesn't even appear to positively increase my hash rate on fast-pool....doesn't make any sense. I added 6 cards since yesterday and im still mining at about the same rate I was without those cards......and the difficulty dropped overnight , didn't increase.

Also how many shares/s should 22,000 kh/s give you ? on average? high and low?
On the dash the meter for shares/s jumps anywhere from 1.88 ~ 3.5 shares/s.... I have almost no reliable metrics other than my own front-end to work with, the fast-pool dash might as well be spitting out random numbers 0o cause the metrics are so volatile.

I don't think its a heat or power issue, since these cards are all in a refrigerated room essentially and everything is cooled down to 70c operating under load.... power should be fine, 1300w psu for only about 820w draw per computer at the moment.


Whats the best way to have workers setup for accurate reporting? one worker for 30 cards or 1 for each card? im using a single worker per card atm in expectation that worker stats some-day come back on and I can monitor individual card performance. (running multiple instances of cgminer per computer)


Thank you for any reply/input.
PS:
Also, the way I managed to get such low rejection / stales was by tweaking around with the expiry setting, Im sitting at around 200% discards 0.4~0.5 rejections and 1.2~1.4% stales atm , is this good or should I just dump all the settings and focus on hash-rate in cgminer, because I can get every card to report 750/450 kh/s but the old front-end would say I was hashing SLOWER even tho CGMINER said it was faster......... it seems that the front end focuses on shares/s and cgminer focuses on operating speed giving you false readings (kh/s is deceptive because high kh/s doesn't seem to always translate into high shares/s submitted).

Thanks.
hero member
Activity: 714
Merit: 512
Should worker stats be back soon ?

Looking to move my 11,000 khash over but hard to keep an eye on all my workers without that.
newbie
Activity: 13
Merit: 0
BIG OPTIMALIZATION MADE TODAY
NEW DDOS PROTECTION
THANK YOU FOR YOUR TRUST GUYS


great! i've sent small donate to your pool and hope that will send it in the future Wink
sr. member
Activity: 350
Merit: 250
BIG OPTIMALIZATION MADE TODAY
NEW DDOS PROTECTION
THANK YOU FOR YOUR TRUST GUYS
newbie
Activity: 56
Merit: 0
I have a little idea how people can see if somebody else had log in on there account.
make a subtab with every log in, on what hour and what ip that is was.
if you log in and see that there is a ip that you don't know that log in when you where a sleep then you know that you must check if every thing is ok and change your password.

I have see this before on a game.
newbie
Activity: 13
Merit: 0
one more question Smiley Pool don't show actual status of workers to me. Is that ok?

ye, it needs to be fixed, but its not really matter, right ?Cheesy
it's not so matter for now, but it's very comfortably if you see status of your workers Wink It would be great if authors fix that in the nearest future.

just wondering - I saw interesting config at other pools - Notification about payouts and workers-idle status to your e-mail, Is it possible to realize that here?  Or it should use a lot of resources?
sr. member
Activity: 350
Merit: 250
hi, there is an account locked, should i post user name here or what?

use email Smiley [email protected]
newbie
Activity: 30
Merit: 0
hi, there is an account locked, should i post user name here or what?
sr. member
Activity: 350
Merit: 250
im made FAQ for you guys Smiley http://fastpoolfaq.wordpress.com


NOW EVERYTHING IS OK...STATS WILL BE ONLINE AGAIN IN 1-2H

EDIT: PAYOUT (UNCONFIRMED) FROZEN WILL FIX IT TOO Smiley

BUT IT WILL BE CREDITED Smiley DONT WORRY
full member
Activity: 214
Merit: 100
one more question Smiley Pool don't show actual status of workers to me. Is that ok?

ye, it needs to be fixed, but its not really matter, right ?Cheesy
newbie
Activity: 13
Merit: 0
one more question Smiley Pool don't show actual status of workers to me. Is that ok?
sr. member
Activity: 350
Merit: 250
down again, pool left.

STRATUMS ARE OK,ALL SHARES ARE COUNTED
WEBSITE ON HEAVY DDOS WE WORKING ON IT
legendary
Activity: 1036
Merit: 1001
/dev/null
down again, pool left.
sr. member
Activity: 350
Merit: 250
working on email support is painfull Wink

i made FAQ from all emails today:

http://fastpoolfaq.wordpress.com

will implement it to the site soon when i will finish  Roll Eyes
sr. member
Activity: 350
Merit: 250
Damn, got hacked last night and some badass changed the payment address and cashed out like 60k of my precious doges (I have 10k autopayment but I was asleep and didn't notice)!!!
Changed password immediatelly and also want to change PIN BUT your MPOS installation is lacking the Reset PIN feature... How do I change it?

1) just change password and you are set

2) dont mine on other pools....Tongue....with same password/login and pins

3) more like you will come...MPOS password is encrypted...but hey....dont we all have powerfull gpu to crack it  Huh

SO ONCE AGAIN! DONT USE SAME PASSWORD HERE & OTHER POOLS!
CHECK YOUR AUTO-PAYMENT ADRESS
member
Activity: 126
Merit: 11
WTF Guys!!! Stop use 0000 or 1111 as your digit pin! How is it possible that guys can change your address, when your account is passwordprotected AND Pinprotected?
newbie
Activity: 4
Merit: 0
Damn, got hacked last night and some badass changed the payment address and cashed out like 60k of my precious doges (I have 10k autopayment but I was asleep and didn't notice)!!!
Changed password immediatelly and also want to change PIN BUT your MPOS installation is lacking the Reset PIN feature... How do I change it?
Pages:
Jump to: