Topic: [ANN][SUPERCOIN] Unique Most Advanced Anonymous Trustless Multisig Technology - page 14. (Read 288864 times)
November 19, 2014, 12:33:39 AM
sorry seems some problems with github, let me open a support case there. Should be available soon. If not, I will create a new repo.
November 19, 2014, 12:22:57 AM
OK first let me thank all who care about this coin. Due to the fact that I see no experienced dev come forward to take over the code and people expressed their opinions to release the source code, I released it now at github
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
https://github.com/supercoinproject/supercoin-p2p gives me a 404, page not found.
Hmm... my search result:
Quote
We couldn't find any repositories matching 'supercoinproject'
Perhaps supercoindev "is releasing it" but hasn't posted yet?
November 18, 2014, 11:42:19 PM
OK first let me thank all who care about this coin. Due to the fact that I see no experienced dev come forward to take over the code and people expressed their opinions to release the source code, I released it now at github
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
https://github.com/supercoinproject/supercoin-p2p gives me a 404, page not found.
November 18, 2014, 11:35:00 PM
OK first let me thank all who care about this coin. Due to the fact that I see no experienced dev come forward to take over the code and people expressed their opinions to release the source code, I released it now at github
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
https://github.com/supercoinproject/supercoin-p2p
So we have an open source now, anyone can maintain and continue developing it. I developed the p2p anonymous system with multisig technologies in a little more than a month time, it was an exciting and intense month that I spent a lot time developing the code and testing. A few people helped me testing the code, especially supercointeam, and with whom we supported the supercoin community for many months. The code works very smoothly, though it still have many aspects to be enhanced which I will list below for the potential future developers.
It was fun and exciting with supercoin. We have many great supporters, also enough fudders. I still see sometimes people doubt if the code is real. Imagine this, how can I put fake things inside that can work so flawlessly? and with dynamic log messages that everyone can use the console and see? There are so many dumb people in this domain, and so few people who really understand the technologies.
Now the code is public, please review the code (well for those who really know the code, otherwise it will be tough for you... very tough). If you have issues with the code, please use debugger, you will understand it better. I may come back from time to time to check the comments and questions, but as I am busy, I won't reply unless it is really needed.
For the future developers, please note that the p2p anonymous code with multisig is done in about one month time, therefore while I ensure the main scenarios working fine, there are some codes I haven't got time to complete, this is mainly in the domain of error handling and reverting back the transaction, this should be easy to add (though it could be tedious) based on the existing code. Another potential issues is the out of sequence messages. I handled many such cases during my tests, all occurred scenarios are handled. But due to the potential high number of combinations, in rare case there may still be some potential cases due to out of sequence messages that the transaction may fail.
Anyway, have fun with the code, and if you understand it well, you can copy-paste to another coin. But doing so only if you understand the code, since it is complex code. I'd be really sad if you copy-paste the code but don't know how to handle issues when they occur
November 18, 2014, 05:33:13 PM
I gave them 2 weeks so 13 days left.
What is the benefit, I still have doubt that superdev will release the code. They never want to share and audit code.
For them they were superior and other are just inferior to them and will steal super code.
Though I appreciate your skepticism, wait it out just a bit. Up until now, we haven't had a prospective new Dev team make an appearance in thread. How supercoindev responds to this will be definitive about the future of the coin.
+1
November 18, 2014, 05:26:07 PM
I gave them 2 weeks so 13 days left.
What is the benefit, I still have doubt that superdev will release the code. They never want to share and audit code.
For them they were superior and other are just inferior to them and will steal super code.
Though I appreciate your skepticism, wait it out just a bit. Up until now, we haven't had a prospective new Dev team make an appearance in thread. How supercoindev responds to this will be definitive about the future of the coin.
November 18, 2014, 04:41:05 PM
this super coin its blazing fast, transactions in few seconds,
November 18, 2014, 04:15:18 PM
I gave them 2 weeks so 13 days left.
What is the benefit, I still have doubt that superdev will release the code. They never want to share and audit code.
For them they were superior and other are just inferior to them and will steal super code.
The Benefit would be that Supercoin could continue. If supercoindev wants that the code is going to stay closed, then we do understand that. We from MWC/ECC also keep our own developed source closed, it is a way of creating value for the coin and keep copy and paste developers on a distance.
For us to take over Supercoin we will need that code, without it there is no Supercoin, nor will there be any update to the wallet, it is essential.
So if SupercoinDev or Supercointeam is reading this, contact me or Griffith so we can come to an agreement that is best for us all.
Thanks!
November 18, 2014, 03:28:28 PM
I gave them 2 weeks so 13 days left.
What is the benefit, I still have doubt that superdev will release the code. They never want to share and audit code.
For them they were superior and other are just inferior to them and will steal super code.
November 18, 2014, 03:07:42 PM
same here 
November 18, 2014, 01:40:32 PM
I gave them 2 weeks so 13 days left.
Oh wow and i just happen to have 10k super
stored away, having forgotten about supercoin
due to all its problems. As part of the mwc dev team
i personally welcome this news as supercoin was always
one of my favourite coins. I hope things work out!
November 18, 2014, 01:11:39 PM
I gave them 2 weeks so 13 days left.
Oh wow and i just happen to have 10k super
stored away, having forgotten about supercoin
due to all its problems. As part of the mwc dev team
i personally welcome this news as supercoin was always
one of my favourite coins. I hope things work out!
November 18, 2014, 12:34:06 PM
November 18, 2014, 12:03:53 PM
I gave them 2 weeks so 13 days left.
November 18, 2014, 10:48:17 AM
Do not worry guys, just keep on trying to reach him , anyway you can.
I am positive that they will soon find out what is going on with Supercoin and release the code.
Surely , they do not wanna see the coin they created die
I am positive that they will soon find out what is going on with Supercoin and release the code.
Surely , they do not wanna see the coin they created die
November 18, 2014, 09:48:24 AM
We hope the dev and supercointeam will appear again.
November 18, 2014, 06:59:54 AM
First: we make contact with supercoindev.
Second: we get Griffith to review the code.
Third: we promote supercoin as being more #anonymous than darkcoin and more user friendly than monero.
Fourth: we have Griffith and their DEV team work their magic and add the ability to trade coins from within the wallet.
Fifth: we have Griffith and the DEV team add features from multiwalletcoin such as storing bitcoin and other cryptocurrencdoes within the same wallet. trading within the wallet was an original step in the supercoin road map.
Second: we get Griffith to review the code.
Third: we promote supercoin as being more #anonymous than darkcoin and more user friendly than monero.
Fourth: we have Griffith and their DEV team work their magic and add the ability to trade coins from within the wallet.
Fifth: we have Griffith and the DEV team add features from multiwalletcoin such as storing bitcoin and other cryptocurrencdoes within the same wallet. trading within the wallet was an original step in the supercoin road map.
November 18, 2014, 06:36:36 AM
so what do we summarise from this event
November 18, 2014, 06:35:25 AM
No word yet. SupercoinDev barely signs on. The last known time supercoindev was logged in was November 7th. Supercointeam was October 28th I believe. I sent a direct message on Twitter to @coinsuper and sent a private message to supercoindev on this forum already. I wish they had more direct way to communicate with them. A part of me believes this is a wild goose chase. I wonder if supercoindev will actually release the source code to Griffith? Especially since the code was not audited yet. We need code to be release so we can finally have it reviewed and then promote the hell out of it!
November 18, 2014, 03:45:52 AM
So where is the old development team? Still no word?
Jump to: