Does anyone got any coin from solo?
No, 3 machines here.
Edit: found 1st block 183523 coins
Topic: [ANN][THOR] THORCOIN | ASIC RESISTANT | PoS | Join the THOR Community! - page 47. (Read 76014 times)
February 24, 2014, 02:52:08 PM
No, 3 machines here.
Edit: found 1st block 183523 coins
February 24, 2014, 02:51:41 PM
Check your junk mail, its there
February 24, 2014, 02:50:26 PM
Doing about 10.8 Mhs usually get 3.6Mhs on regular Scrypt. Not found any blocks, I'm assuming that I'm too small fry to get any solo mining with such a small rig?
-first time solo mining.
Cheers
-first time solo mining.
Cheers
February 24, 2014, 02:45:26 PM
Does anyone got any coin from solo?
February 24, 2014, 02:43:13 PM
I now have this with solo-miner (but i want group)
I see only A:0 and R:0 but now R:87
Please help
I see only A:0 and R:0 but now R:87
Please help
Please solomine right now or do not mine at all (total waste of electricity for you). Looks like you're mining with the wrong miner (!!!!!) on not working pool (!!!!). And it looks like you don't read what I posted earlier. Maybe I should set you a solo miner myself or better send some coins I solomined to make you happy?
I'll read it again.
newby here
coins are always welcome though :-)
February 24, 2014, 02:42:12 PM
after activacion link
The page you requested was not found.
please add user ekrem
The page you requested was not found.
please add user ekrem
February 24, 2014, 02:36:17 PM
i go to mine other coin the bad project no any trusted pool
just wasting electricity and time
good luck to premined dev
just wasting electricity and time
good luck to premined dev
February 24, 2014, 02:35:10 PM
Mining with 3 machines. No accepts or rejects yet.
same no any reject or accept with solo where the block
the may be normal scrypt no jane
It's totally ok! You didn't solomine ever? Accepted share = found block, rejected share = orphan block (you found the block but somebody on the bet submitted same block faster). Chech your best share value! if it's rising, everything is fine, you're mining.
Ofcourse I solo mined before hehe. But normally is see rejects etc.
Yes I noticed that too - no rejects. So unusual for a newly launched coin. Nice and clean without the mess of orphans and rejects bouncing in and out of the wallet.
February 24, 2014, 02:33:55 PM
My cards love scrypt jane. At least I can sleep again, so much noise reduction, from 72 to 58 degrees.
February 24, 2014, 02:31:57 PM
I now have this with solo-miner (but i want group)
I see only A:0 and R:0 but now R:87
Please help
I see only A:0 and R:0 but now R:87
Please help
You need to download the custom miner in the original post, post#1.
Thorcoin miner.
Then unzip, edit solo-miner.bat with the username and password the same as in your .conf. file.
You cannot use your cgminer with this because this is scrypt-jane.
February 24, 2014, 02:31:22 PM
Is this the same dev as tittiecoin launching a new pump and dump premine?
February 24, 2014, 02:30:51 PM
Pool thor.coinoyo.com its up soon and claiming the last bounty
Can't open link.
February 24, 2014, 02:30:41 PM
Mining with 3 machines. No accepts or rejects yet.
same no any reject or accept with solo where the block
the may be normal scrypt no jane
It's totally ok! You didn't solomine ever? Accepted share = found block, rejected share = orphan block (you found the block but somebody on the bet submitted same block faster). Chech your best share value! if it's rising, everything is fine, you're mining.
Ofcourse I solo mined before hehe. But normally is see rejects etc.
i am same no newbie
February 24, 2014, 02:28:20 PM
Pool thor.coinoyo.com its up soon and claiming the last bounty
February 24, 2014, 02:27:45 PM
Mining with 3 machines. No accepts or rejects yet.
same no any reject or accept with solo where the block
the may be normal scrypt no jane
It's totally ok! You didn't solomine ever? Accepted share = found block, rejected share = orphan block (you found the block but somebody on the bet submitted same block faster). Chech your best share value! if it's rising, everything is fine, you're mining.
Ofcourse I solo mined before hehe. But normally I see rejects etc.
February 24, 2014, 02:23:37 PM
I now have this with solo-miner (but i want group)
I see only A:0 and R:0 but now R:87
Please help
I see only A:0 and R:0 but now R:87
Please help
Please solomine right now or do not mine at all (total waste of electricity for you). Looks like you're mining with the wrong miner (!!!!!) on not working pool (!!!!). And it looks like you don't read what I posted earlier. Maybe I should set you a solo miner myself or better send some coins I solomined to make you happy?
February 24, 2014, 02:21:03 PM
Mining with 3 machines. No accepts or rejects yet.
same no any reject or accept with solo where the block
the may be normal scrypt no jane
It's totally ok! You didn't solomine ever? Accepted share = found block, rejected share = orphan block (you found the block but somebody on the bet submitted same block faster). Chech your best share value! if it's rising, everything is fine, you're mining.
February 24, 2014, 02:17:05 PM
Mining with 3 machines. No accepts or rejects yet.
same no any reject or accept with solo where the block
the may be normal scrypt no jane
February 24, 2014, 02:16:40 PM
solo-miner: thorcoinminer -o 127.0.0.1:29551 -u user -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1393167677 -I 15
thor config:
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
port=29550
rpcport=29551
addnode=162.250.125.26
addnode=1.122.196.119
Is this OK for solo
thor config:
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
port=29550
rpcport=29551
addnode=162.250.125.26
addnode=1.122.196.119
Is this OK for solo
edit the .conf file and set user and pw.
Also make a .bat file with: thorcoin-qt.exe -server to start qt as server
February 24, 2014, 02:16:25 PM
I now have this with solo-miner (but i want group)
I see only A:0 and R:0 but now R:87
Please helphttp://oi58.tinypic.com/30w2eec.jpg
I see only A:0 and R:0 but now R:87
Please helphttp://oi58.tinypic.com/30w2eec.jpg
Jump to: