[ANN][WHRL] WhirlCoin | WhirlPool Algorithm | Sloped Rewards |AMD + CUDA Equal - page 42.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: gringen1 on July 21, 2014, 05:17:56 PM

Quote from: djm34 on July 21, 2014, 05:06:53 PM

Quote from: majsta on July 21, 2014, 05:00:03 PM

for me 2.5-3,

but I m out there is no point anymore coin is mined too much by now.

I must confess, if there had been a huge instamine, I would not have released the miner so fast.
I was tricked by someone who said he was about to release Grin

(while he had only whirlpool.cl)
(but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon )

I use ccminer win version for Nvidia downloaded from MEGA link. It stops at: stratum found new block. I use following config: ccminer -a whirlcoin -q -o stratum+tcp://erebor.dwarfpool.com:3358 -u WALLET -p x

I removed -q (with -q enabled stopped at thread 1)
I tried -f256 with no result.
Any suggestions?
Thank you ☺

use this exe, the previous one didn't support pool stratum (while it is the one of x11 and some others) https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc

MCMK

full member

Activity: 188

Merit: 100

Quote from: Monopoly on July 21, 2014, 05:22:05 PM

sync problem .

You add the nodes in the OP?

Monopoly

hero member

Activity: 546

Merit: 500

sync problem .

thorana

newbie

Activity: 11

Merit: 0

Can someone post the windows binaries for amd miner ? Embarrassed

thanks

gringen1

newbie

Activity: 10

Merit: 0

Quote from: djm34 on July 21, 2014, 05:06:53 PM

Quote from: majsta on July 21, 2014, 05:00:03 PM

for me 2.5-3,

but I m out there is no point anymore coin is mined too much by now.

I must confess, if there had been a huge instamine, I would not have released the miner so fast.
I was tricked by someone who said he was about to release Grin

(while he had only whirlpool.cl)
(but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon )

I use ccminer win version for Nvidia downloaded from MEGA link. It stops at: stratum found new block. I use following config: ccminer -a whirlcoin -q -o stratum+tcp://erebor.dwarfpool.com:3358 -u WALLET -p x

I removed -q (with -q enabled stopped at thread 1)
I tried -f256 with no result.
Any suggestions?
Thank you ☺

Monopoly

hero member

Activity: 546

Merit: 500

Commond line .bat for R9 290 please .

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: majsta on July 21, 2014, 05:00:03 PM

for me 2.5-3,

but I m out there is no point anymore coin is mined too much by now.

I must confess, if there had been a huge instamine, I would not have released the miner so fast.
I was tricked by someone who said he was about to release Grin

(while he had only whirlpool.cl)
(but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon )

kondiomir

legendary

Activity: 1568

Merit: 1000

Twitter @Acimirov

So is there AMD miner guys ?

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: ?? on ??

Hello everybody.

We just created a new cryptocoin related Forum, completely built on Node.js .

You're welcome to open a new thread for your coin & community on http://5.101.107.239:4567/

Our conception is second generation minded: scalability, speed, lightness, security.

We are proud to announce the opening beta of CRYPTOBBFORUM !

We will open registration for the first 150/200 users and test for beta testing purposes. Next we'll open it to the public!

Please connect to http://5.101.107.239:4567/ and try it out!

Any feedback and suggestion are welcome.

PLEASE NOTE: this is a beta testing, final website will have owned domain and will listen to port 80

CryptoSkills Team. Wink

could you please quit your shit ad on every second page of this thread.. no one wants your node.js bullshit.

thanks

majsta

hero member

Activity: 561

Merit: 500

kittehcoin.info

for me 2.5-3,

but I m out there is no point anymore coin is mined too much by now.

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: djm34 on July 21, 2014, 04:57:25 PM

Quote from: Bombadil on July 21, 2014, 04:53:22 PM

Quote from: djm34 on July 21, 2014, 04:50:40 PM

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)
It require the 14.6 amd drivers

Ssht, don't talk that loud. Don't tell them so us Nvidia miners still have a chance. Btw, my gtx760 is doing around 6-6.5MH/s, my 750tis only 4-4.5MH/s each Tongue

I'm not used to this difference Wink

Great work djm, as always Cheesy

actually the performance of the nvidia are way better... (I don't think that the multikernel is a good idea here for the amd with the 8 giant ulonglong vectors)

@ocminer
I am currently running with the 14.7 drivers, without any problem at 4.18MHash/s average.
what intensity are you using ? (I use 20)

i'll give 14.7 a try now

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: Bombadil on July 21, 2014, 04:53:22 PM

Quote from: djm34 on July 21, 2014, 04:50:40 PM

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)
It require the 14.6 amd drivers

Ssht, don't talk that loud. Don't tell them so us Nvidia miners still have a chance. Btw, my gtx760 is doing around 6-6.5MH/s, my 750tis only 4-4.5MH/s each Tongue

I'm not used to this difference Wink

Great work djm, as always Cheesy

actually the performance of the nvidia are way better... (I don't think that the multikernel is a good idea here for the amd with the 8 giant ulonglong vectors)

@ocminer
I am currently running with the 14.7 drivers, without any problem at 4.18MHash/s average.
what intensity are you using ? (I use 20)

majsta

hero member

Activity: 561

Merit: 500

kittehcoin.info

I have compiled GPU miner for AMD for win. Aldo temperatures are not detected but it is not important for me anyway.

whirlcoin

full member

Activity: 602

Merit: 111

I'll offer another 20000 for someone with a decent-ly compiled gpu-miner for amd on windows & source, to get everyone on a level field

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: djm34 on July 21, 2014, 04:50:40 PM

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)
It requires the 14.6 amd drivers

yes, i'm on the latest beta drivers

whirlcoin

full member

Activity: 602

Merit: 111

I can now confirm the Windows CPUminer works with pools - probably a bit late Wink

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: djm34 on July 21, 2014, 04:50:40 PM

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)
It require the 14.6 amd drivers

Ssht, don't talk that loud. Don't tell them so us Nvidia miners still have a chance. Btw, my gtx760 is doing around 6-6.5MH/s, my 750tis only 4-4.5MH/s each Tongue

I'm not used to this difference Wink

Great work djm, as always Cheesy

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: djm34 on July 21, 2014, 04:50:40 PM

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)

nope still 350 kh/s ..

and only my first from three cards is recognized.. never had such problems before.. strange

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: ocminer on July 21, 2014, 04:44:47 PM

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

I am getting 4MHash/s with a R9 290x (I am a bit surprised by the 350kh/s)
It requires the 14.6 amd drivers

ocminer

legendary

Activity: 2688

Merit: 1240

lol performance is cool..

350 kH/s from a R9 280x

I'll do a fresh compile.. cant be so bad

Topic: [ANN][WHRL] WhirlCoin | WhirlPool Algorithm | Sloped Rewards |AMD + CUDA Equal - page 42. (Read 118130 times)