[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 15.

ebliever

legendary

Activity: 1708

Merit: 1036

Quote from: 124C41 on June 23, 2014, 09:19:18 PM

Quote from: COOLERbyPSP on June 19, 2014, 06:42:11 PM

Quote from: tajnost on June 19, 2014, 06:23:53 PM

can you post settings

W 8.1 (for 14.6 only)
Just replace .cl files
http://puu.sh/9Bkmt/c7f933e297.7z

I don't know author of this mod, sorry =(

Will this work with drivers 14.4 or earlier?
I know it says 14.6 only but I read somewhere that it worked without it.

I think it works with older versions, you just don't see a boost. I've save the old kernel files and just replace them if the new ones give you any trouble.

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

Quote from: COOLERbyPSP on June 19, 2014, 06:42:11 PM

Quote from: tajnost on June 19, 2014, 06:23:53 PM

can you post settings

W 8.1 (for 14.6 only)
Just replace .cl files
http://puu.sh/9Bkmt/c7f933e297.7z

I don't know author of this mod, sorry =(

Will this work with drivers 14.4 or earlier?
I know it says 14.6 only but I read somewhere that it worked without it.

old_pioner

full member

Activity: 139

Merit: 100

Quote from: followtheboss on June 22, 2014, 01:35:42 PM

X13 mining with -k x13modold is working for amd h5xxx and h6xxx Huh

??

Cause i can't get it work.....

only HW

Only HW too on 7870
sgminer.exe -k x13mod -w 128 --gpu-powertune 10 --no-submit-stale --thread-concurrency 5120 -X 300
and sgminer.exe -k x13mod (no options) same issue

oneoff

full member

Activity: 148

Merit: 101

Quote from: teknohog on June 22, 2014, 05:10:39 PM

Quote from: oneoff on June 22, 2014, 12:50:04 PM

Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.

This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config.

IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back.

Thanks. It works good, I prefer some K/hash loss instead of activating/deactivating every time I'm doing something on my computer. Not mention when someone in my family want to stream something.

Let's see if it is stable...

deznuts

newbie

Activity: 44

Merit: 0

New files working well with the 290x, 7970, and 7950 in both x11 and x13. Didn't add any performance to the 5970 sadly. All tested with the beta 14.6 driver.

korobass

newbie

Activity: 2

Merit: 0

Quote from: jamestown2035 on June 23, 2014, 10:16:21 AM

Also i have normal cpu usage until I run sgminer, even if I run CGminer I still get 100% usage I was thinking maybe it was the drivers, but since the other machine isn't doing it I'm kind of stumped.

If you're using a Linux, try to add LD_LIBRARY_PATH to point to your driver directory in your startup script.

For example:

^{export LD_LIBRARY_PATH=/usr/lib/fglrx:$LD_LIBRARY_PATH}

chadwickx16

hero member

Activity: 826

Merit: 1000

Quote from: jamestown2035 on June 23, 2014, 06:42:22 AM

Quote from: chadwickx16 on June 22, 2014, 07:47:02 PM

Quote from: COOLERbyPSP on June 19, 2014, 06:42:11 PM

Quote from: tajnost on June 19, 2014, 06:23:53 PM

can you post settings

W 8.1 (for 14.6 only)
Just replace .cl files
http://puu.sh/9Bkmt/c7f933e297.7z

I don't know author of this mod, sorry =(

Will this work for 7950's? I've seen report of all the R9's but no 7900 series card?

7970's work I would imagine 7950's too.

Thanks! I'll be trying this later. And I'll report back.

jamestown2035

full member

Activity: 126

Merit: 100

Also i have normal cpu usage until I run sgminer, even if I run CGminer I still get 100% usage I was thinking maybe it was the drivers, but since the other machine isn't doing it I'm kind of stumped.

jamestown2035

full member

Activity: 126

Merit: 100

I have 2 machines running this with 14.6 drivers. one machine is showing normal cpu usage. The other is showing 100%. Both only show one process sgminer*32. The only difference between the 2 machines is I had slimcoin miner on the one acting funny, but nobody is answering my questions there. This issue started over the weekend and the only downloads I made were these kernels and the slimcoin wallet. I've since removed the slimcoin wallet and the miner and still having the issue. I don't want to accuse slimcoin of this, as if may have been due to something else. I just trying to see if anyone experiencing the same issues.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: jamestown2035 on June 23, 2014, 08:14:48 AM

That's what I'm thinking but my only process running is sgminer showing 99%

what sgminer you get? probably a malicious one running your pc as a botnet

jamestown2035

full member

Activity: 126

Merit: 100

That's what I'm thinking but my only process running is sgminer showing 99%

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: jamestown2035 on June 23, 2014, 06:41:32 AM

Any one else getting a 100% CPU load when running this?

check your processes, you might have a virus

jamestown2035

full member

Activity: 126

Merit: 100

Quote from: chadwickx16 on June 22, 2014, 07:47:02 PM

Quote from: COOLERbyPSP on June 19, 2014, 06:42:11 PM

Quote from: tajnost on June 19, 2014, 06:23:53 PM

can you post settings

W 8.1 (for 14.6 only)
Just replace .cl files
http://puu.sh/9Bkmt/c7f933e297.7z

I don't know author of this mod, sorry =(

Will this work for 7950's? I've seen report of all the R9's but no 7900 series card?

7970's work I would imagine 7950's too.

jamestown2035

full member

Activity: 126

Merit: 100

Any one else getting a 100% CPU load when running this?

genebart

newbie

Activity: 18

Merit: 0

Anyone have a working link to Cooler's file? The one he posted seems to be dead to me.

chadwickx16

hero member

Activity: 826

Merit: 1000

Quote from: COOLERbyPSP on June 19, 2014, 06:42:11 PM

Quote from: tajnost on June 19, 2014, 06:23:53 PM

can you post settings

W 8.1 (for 14.6 only)
Just replace .cl files
http://puu.sh/9Bkmt/c7f933e297.7z

I don't know author of this mod, sorry =(

Will this work for 7950's? I've seen report of all the R9's but no 7900 series card?

nfox

sr. member

Activity: 462

Merit: 250

[00:22:05] Initialising kernel x11mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[00:22:05] Error -46: Creating Kernel from program. (clCreateKernel)

With that x11mod.cl

DARKANGEL6415

hero member

Activity: 672

Merit: 500

ADAMANT — the most secure and anonymous messenger

Quote from: teknohog on June 22, 2014, 05:10:39 PM

Quote from: oneoff on June 22, 2014, 12:50:04 PM

Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.

This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config.

IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back.

now that my friend is interesting to know even though i did not ask the question the answer appeals to me

teknohog

sr. member

Activity: 520

Merit: 253

555

Quote from: oneoff on June 22, 2014, 12:50:04 PM

Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.

This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config.

IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back.

DARKANGEL6415

hero member

Activity: 672

Merit: 500

ADAMANT — the most secure and anonymous messenger

Quote from: K1773R on June 22, 2014, 04:20:25 PM

Quote from: DARKANGEL6415 on June 22, 2014, 03:56:41 PM

is there a reason why they say dont go past I 15 i normally run my card between 17 - 19 granted its on N scrypt or just scrypt

you just answered your own question

lol its not answering my question so i just put it at 17 and seems to be running fine 1 hour in getting about 800 kh more total from my 3 cards, but if there is a legit reason please tell me i seen something about a 2% but did not quite understand it

Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 15. (Read 351555 times)