Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 62. (Read 351555 times)

He said he blocked the pool so there isn't a way for it to connect. I am digging through girino's miner but at this point it's just a needle in a haystack search.

Frequent hops between pools (==girino miner) -> less Diff
Less Diff -> more WU (and vise versa)

Long stay on one pool (==current version) -> more Diff
More Diff -> less WU.

 Yeah, I do know that... but a +5mh/s difference is huge! And with CGWatcher and blocking in widnows hosts, I get back girino's 2% at the cost  of a 15 second reconnect to pool.

So waht I'm getting at is... Tell me what to do to NOT use girino, use this, and tip the devs for their hard work!

Each GPU is different, those settings are for a particular card and those clocks might be lower,higher or even unstable.

I dont understand your question. I need config file which works on Smos 1.3 for R9 270, R9 280x and 7950. My old gpu setting does not work on this new miner.

I'm sorry all, I did NOT go through the thread, just sharing my info and taking if from here. I'm waaay to busy to go through all this, but will be attempt from here on.

I did NOTHING in terms of argument change, and this miner vs girino was INFERIOR in hashrate.

but... fuck girino plus his GNU-obscene 2% fee.

 Then I looked over my settings, thinking hmmm... optimized..? went from -g 1  to -g2 ... and despite the odd driver crash, everything is spot on, a slight increase in hashrate, same or even lower temps!

Second... 5x BIOS Undervolted 280x Vapor-X (think, bought it cheap off ebay). Getting 3mh/s per card. With this miner, I have a lower WU by about 80 !!!



This was my (extensively experimented) regular darkcoin kernel settings (radically different to scrypt) - also used for girino


 With this one, these settings get me barely same hashrate, slightly lower... about 700kh/s lower in total. Nothing to cry over. If I do -g 2, I have to drastically lower intensity. 19, 18 17, 16 ----crashes driver

15 is the sweet spot indeed. I have not checked for consumption and heat in the long term, but by heat signature it seems to be a little worse than girino's 2% miner (which is easily overridden)

Also, pool reports much lower rate than girino's by quite a few (2-4 mh/s). More HW error with this one as well, and its crashing frequently.
So I ask the real pro's to check my settings and suggest some tweaks, if you please! I really do think it my settings!

I know these are ONLY preliminary findings, and need time to stabilise.

Thanks in advance!

EDIT: went back to girino's... I found that I get way more WU with his. Sorry guys, but willing to try anything and support! But what can I say... with girino, pool report 15mh/s, with this one around 10mh/s - either I'm doing something wrong, or I dont know...

girino screenshot

somone can give me jackpotcoin conf for this miner?

I got only 3.35m per 280x with your settings at 1100/1500.14.4 catalyst. What's your other settings?
Posted from Bitcointa.lk - #XEGHiQvw9m9jVRTN

how is that related to SMOS?

Just thought I'd share my settings. I can only access one of my 280x's right now, it's an XFX non-BE (you know, the crap one for mining...)




Ignore the 2650, I had PS doing some batching in the background which I forgot about. It's very stable 3.2-3.3mh/s and considering I was only just getting 2.2mh/s with normal SGMiner on this card.

I have 2x MSI 280x's as well, they are on the same bat except the GPU is running 1050 and the pair are averaging 6.6mh/s stable.

All in all, a worth while upgrade.

Can you give me config files?

I tried, it is mistype. Still dont know what is "default"

try this:

975/1250 and not 975/1025

it is sapphire. 975/1025 gave me 22kH what is default?

Script worked, modified bamt.conf, copied my sgminer-sph.conf to sgminer-x11mod.conf, changed kernel to "x11mod" - runs but get loads of HW errors and half the hashrate.

Here's the sgminer-x11mod.conf, pair of 270s and a 6870:

OpenCL is not object oriented, not to my knowledge at least. The reason it was smashed into one file was so girino could embed it into his miner. Still tweaking the x13 kernel.

It depends what kind of r9 290 you have. Is it Gigabyte , Is it Asus, is it Sapphire. On Sapphire i get 3.5 mh/s with default settings and 975/1025

I have 2 x Gigabyte R290 OC and with default settings get:

• Windows 8.1
• ~470 Watts
• Catalyst: 13-12_win7_win8_64_dd_ccc_whql

http://i.imgur.com/1swwIa3.png


default settings:
,
"intensity" : "18",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Thank you!

all default

I do.