Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 66. (Read 351555 times)
May 26, 2014, 03:20:02 PM
Has anyone tried this with BAMT?
May 26, 2014, 03:18:53 PM
Any ideas why the miner doesn't seem to load the config settings? Intensity is working but fan speed and engine clocks are wrong.
Quote
"auto-fan": true,
"gpu-fan": "50-90",
"temp-cutoff": "95",
"temp-target": "75",
"gpu-engine": "1000",
"worksize": "256",
"intensity": "19",
"thread-concurrency": "24000",
"gpu-powertune": "20",
"api-port": "4028",
"api-listen": true,
"api-allow": "W:127.0.0.1",
"failover-only" : true,
"no-pool-disable": true,
"no-submit-stale" : true,
"queue": "0",
"kernel" : "x11mod",
"kernel-path": "/usr/local/bin"
"gpu-fan": "50-90",
"temp-cutoff": "95",
"temp-target": "75",
"gpu-engine": "1000",
"worksize": "256",
"intensity": "19",
"thread-concurrency": "24000",
"gpu-powertune": "20",
"api-port": "4028",
"api-listen": true,
"api-allow": "W:127.0.0.1",
"failover-only" : true,
"no-pool-disable": true,
"no-submit-stale" : true,
"queue": "0",
"kernel" : "x11mod",
"kernel-path": "/usr/local/bin"
change voltage to 1.2 and it will working good
May 26, 2014, 03:18:16 PM
Has anyone tried this with PiMP?
yes its working perfect
do pmupdate or pimpupdate and choose there 13 line of x11 mod miner install
May 26, 2014, 02:54:47 PM
Getting 3.2Mhs with 7970s need to upgrade to sort out the diff readings.
Bat:
Miner:
Hope this helps somebody
Bat:
Code:
-I 17 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20
Miner:
Code:
sgminer 4.1.0 - Started: [2014-05-26 20:42:36]
--------------------------------------------------------------------------------
(5s):16.26M (avg):16.25Mh/s | A:2 R:0 HW:0 WU:0.231/m
ST: 1 SS: 0 NB: 9 LW: 1351 GF: 0 RF: 0
Connected to Pool 0 (stratum) diff 0.000 as user
Block: 2d3f442e... Diff:5.93K Started: [20:51:26] Best share: 82 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 55.0C 2610RPM | 3.250M/3.259Mh/s | R: 0.0% HW:0 WU:0.043/m I:17
GPU 1: 57.0C 2664RPM | 3.264M/3.280Mh/s | R: 0.0% HW:0 WU:0.056/m I:17
GPU 2: 57.0C 2676RPM | 3.245M/3.253Mh/s | R: 2.4% HW:0 WU:0.039/m I:17
GPU 3: 58.0C 2665RPM | 3.255M/3.261Mh/s | R: 0.0% HW:0 WU:0.046/m I:17
GPU 4: 56.0C 2447RPM | 3.257M/3.254Mh/s | R: 0.0% HW:0 WU:0.049/m I:17
--------------------------------------------------------------------------------
[20:50:27] Stratum from Pool 0 detected new block
[20:50:33] Accepted 15a42d3a Diff 0.000/0.000 GPU 0
[20:50:33] Accepted 058da1fe Diff 0.000/0.000 GPU 3
Hope this helps somebody
May 26, 2014, 02:51:40 PM
Question: Will this work on older gpu's? I'm trying it out on my crappy laptop w/ an amd A6-3400M w/ AMD Radeon HD 6520G (512MB)(I know, I know, but i like to get use out of the old laptop). I keep getting an error:
[15:50:16] Error -61: clCreateBuffer (hash_buffer), decrease TC or increase LG
[15:50:16] Failed to init GPU thread 0, disabling device 0
[15:50:16] Restarting the GPU from the menu will not fix this.
[15:50:16] Error -61: clCreateBuffer (hash_buffer), decrease TC or increase LG
[15:50:16] Failed to init GPU thread 0, disabling device 0
[15:50:16] Restarting the GPU from the menu will not fix this.
May 26, 2014, 02:50:14 PM
I>15 = pay 2% fee and I=<15 not 
No, this was fixed in the latest version, -I can be 20 or more 
the last version is the one in the OP?
the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut
this error wasn't present in the first version, the one where you fixed that part of the code
also marucoin is removed from this build
marucoin kernel isn't in this build, you are speaking about a new version?
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 02:37:17 PM
I>15 = pay 2% fee and I=<15 not
No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP?
the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut
this error wasn't present in the first version, the one where you fixed that part of the code
also marucoin is removed from this build
May 26, 2014, 02:29:47 PM
I>15 = pay 2% fee and I=<15 not
No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP?
the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut
this error wasn't present in the first version, the one where you fixed that part of the code
also marucoin is removed from this build
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 02:24:55 PM
I>15 = pay 2% fee and I=<15 not
No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP?
May 26, 2014, 02:24:31 PM
did anybody build this miner on BAMT (1.3/1.6)?
May 26, 2014, 02:18:53 PM
I>15 = pay 2% fee and I=<15 not
No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP?
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 02:08:14 PM
Do any of these builds have the fixes for nicehash incorporated?
Not sure. What are these fixes for? May 26, 2014, 02:07:17 PM
Do any of these builds have the fixes for nicehash incorporated?
May 26, 2014, 02:05:58 PM
Lower TC gives me more kh/s. I tested some. But if u know better, share your knowledge!
how is it with TC 10240 ?Posted from Bitcointa.lk - #GNI8U4ZCbxqHA3gH
May 26, 2014, 02:05:48 PM
its up already then??? Woot !!
Steve
Steve
May 26, 2014, 02:01:49 PM
Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.
Thanks
Steve
Thanks
Steve
use pimpupdate
May 26, 2014, 01:55:21 PM
Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.
Thanks
Steve
Thanks
Steve
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 26, 2014, 01:48:41 PM
I>15 = pay 2% fee and I=<15 not
No, this was fixed in the latest version, -I can be 20 or more May 26, 2014, 01:46:23 PM
Code:
git clone https://github.com/lasybear/sph-sgminer_x11mod
cd sph-sgminer_x11mod
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure
make
I see a lot sgminer-*.o and kernel/*.cl (including x11mod.cl) but I don't see "sgminer" - looks like building error?..
May 26, 2014, 01:39:11 PM
I>15 = pay 2% fee and I=<15 not
Jump to: