Code:
-I 15 -w 128 --thread-concurrency 8192 -g 2 --lookup-gap 2
Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 80. (Read 351545 times)
May 24, 2014, 02:43:07 PM
win 8.1 x64 , 270x @1080/1250 ~1850 Kh/s
May 24, 2014, 02:30:14 PM
7970 - same hash as 2% version = 3,000 Mh per card /+-0.5%/ WU=0.040-0.055
but I can't set more than 1050 gpu engine. If more, there is some issue with hw errors or so.../unstable/
I will try 14.4 beta for compare
interesting is that on same rig with 2x7970:
2% ver ~ 6,090 Mh - WU=0.085 - pool worker diff = 1000-1200
This ver ~ 6.000 Mh - WU=0.095 - pool worker diff = 1500
Code:
-k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1050,1050 --gpu-memclock 1500,1500 --gpu-powertune 20
but I can't set more than 1050 gpu engine. If more, there is some issue with hw errors or so.../unstable/
I will try 14.4 beta for compare
interesting is that on same rig with 2x7970:
2% ver ~ 6,090 Mh - WU=0.085 - pool worker diff = 1000-1200
This ver ~ 6.000 Mh - WU=0.095 - pool worker diff = 1500
May 24, 2014, 02:27:06 PM
All my 280x show between 2.9 to 3.2 MHs, and my p2pool and also other central pool (hiro) shows same values as the miners.
So works for me.
you can give the command lineSo works for me.
i just used this, 1100 core/1500 mem 3.1MH/s, you can go to 3.4MH/s but you need to rise the core too much(from 1100 to 1200, this mean more consumption too, just for a mere 10% increase...), i don't think it's worth it
-k x11mod -o -u -p --gpu-threads 2 --thread-concurrency 8192 -I 15 --lookup-gap 2
May 24, 2014, 02:12:22 PM
All my 280x show between 2.9 to 3.2 MHs, and my p2pool and also other central pool (hiro) shows same values as the miners.
So works for me.
you can give the command line So works for me.
May 24, 2014, 02:08:58 PM
My 290 seems really slow compared to most running X11. Regardless, using this miner I went from 2.35 m/hs to 2.55 m/hs! Stats are incorrect with the miner, but my pool is accepting shares and reflecting the higher hashrate. Thanks for putting this out!
May 24, 2014, 01:58:09 PM
All my 280x show between 2.9 to 3.2 MHs, and my p2pool and also other central pool (hiro) shows same values as the miners.
So works for me.
So works for me.
May 24, 2014, 01:51:25 PM
Someone could run this sgminer at R290 Win7 64bit?
I have when trying to start the system halt.
I have when trying to start the system halt.
May 24, 2014, 01:41:52 PM
no gain over shp-sgminer.
shp-sgminer or this one : (R280x) 2.3MHs (with
2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
shp-sgminer or this one : (R280x) 2.3MHs (with
Quote
sgminer.exe --kernel x11mod --thread-concurrency 8192 -I 15 --gpu-engine 1180 --lookup-gap 2 -g 2 -w 256 -o stratum+tcp://stratum.luckypool.cn:3350 -u azhago.mast -p x
)2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
Results, on two rigs, all 280x :
2%fee version : 3.45MHs
This version : 3.15MHs/3.2MHs
Can you try to change worksize to -w 128?
May 24, 2014, 01:37:35 PM
What settings for 5870?
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s
Pretty sure it's not optimized for the 58XX or 59XX series.
May 24, 2014, 01:36:26 PM
I can get cca 3Mh on my MSI 280x, but only 1,5Mh with Sapphire R290. Any ideas what should be settings for R290? This is my current config (280x,280x,290)
sgminer --kernel x11mod -o stratum+tcp://useast.blackcoinpool.com:3333 -u UserName.1 -p x -g 2 -I 15,15,15 -w 256,256,512 --lookup-gap 2 --thread-concurrency 8192,8192,20480 --gpu-memclock 1800,1800,1500 --gpu-engine 1090,1090,1000 --gpu-fan 60 --gpu-powertune 20
Try to change sgminer --kernel x11mod -o stratum+tcp://useast.blackcoinpool.com:3333 -u UserName.1 -p x -g 2 -I 15,15,15 -w 256,256,512 --lookup-gap 2 --thread-concurrency 8192,8192,20480 --gpu-memclock 1800,1800,1500 --gpu-engine 1090,1090,1000 --gpu-fan 60 --gpu-powertune 20
1.
-I 15 -w 128 --thread-concurrency 8192 -g 2
or
2.
-I 15 -w 256 --thread-concurrency 8192 -g 2
May 24, 2014, 01:23:33 PM
What settings for 5870?
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s
With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2
I get only 1.3 Mh/s
Pretty sure it's not optimized for the 58XX or 59XX series.
May 24, 2014, 01:04:26 PM
no gain over shp-sgminer.
shp-sgminer or this one : (R280x) 2.3MHs (with
2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
shp-sgminer or this one : (R280x) 2.3MHs (with
Quote
sgminer.exe --kernel x11mod --thread-concurrency 8192 -I 15 --gpu-engine 1180 --lookup-gap 2 -g 2 -w 256 -o stratum+tcp://stratum.luckypool.cn:3350 -u azhago.mast -p x
)2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
Results, on two rigs, all 280x :
2%fee version : 3.45MHs
This version : 3.15MHs/3.2MHs
May 24, 2014, 01:01:09 PM
I configured my rent'able miner if you want to see live stats with me, this one usually averages 7MH/s, seems to be about 10 MH/S
https://www.miningrigrentals.com/rigs/1165
https://www.miningrigrentals.com/rigs/1165
May 24, 2014, 12:42:21 PM
I can get cca 3Mh on my MSI 280x, but only 1,5Mh with Sapphire R290. Any ideas what should be settings for R290? This is my current config (280x,280x,290)
sgminer --kernel x11mod -o stratum+tcp://useast.blackcoinpool.com:3333 -u UserName.1 -p x -g 2 -I 15,15,15 -w 256,256,512 --lookup-gap 2 --thread-concurrency 8192,8192,20480 --gpu-memclock 1800,1800,1500 --gpu-engine 1090,1090,1000 --gpu-fan 60 --gpu-powertune 20
sgminer --kernel x11mod -o stratum+tcp://useast.blackcoinpool.com:3333 -u UserName.1 -p x -g 2 -I 15,15,15 -w 256,256,512 --lookup-gap 2 --thread-concurrency 8192,8192,20480 --gpu-memclock 1800,1800,1500 --gpu-engine 1090,1090,1000 --gpu-fan 60 --gpu-powertune 20
May 24, 2014, 12:29:00 PM
Seems to be working for me, on my test rig
2x7950
1x6950
was running ~ 4 MH/S, now about 4.8 MH/S
2x7950
1x6950
was running ~ 4 MH/S, now about 4.8 MH/S
May 24, 2014, 12:24:57 PM
hi all, A positive result will not change after testing your new miner, my rig ran slowly and hasrate decreased from 3.34 mhs to 3.1 mhs at my current Oc spec ( 1170/1500)
using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
What brand is your 280x?It can overclocked that high?What's the voltage?using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
HIS and XFX, runing at wc at 1.2 vcore
May 24, 2014, 12:23:31 PM
hi all, A positive result will not change after testing your new miner, my rig ran slowly and hasrate decreased from 3.34 mhs to 3.1 mhs at my current Oc spec ( 1170/1500)
using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
What brand is your 280x?It can overclocked that high?What's the voltage? using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
May 24, 2014, 12:15:14 PM
no gain over shp-sgminer.
shp-sgminer or this one : (R280x) 2.3MHs (with
2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
shp-sgminer or this one : (R280x) 2.3MHs (with
Quote
sgminer.exe --kernel x11mod --thread-concurrency 8192 -I 15 --gpu-engine 1180 --lookup-gap 2 -g 2 -w 256 -o stratum+tcp://stratum.luckypool.cn:3350 -u azhago.mast -p x
)2% fee version : 3.4MHs
EDIT : ok, i found why : if you use a .conf file, be sure to remove "kernel" : "darkcoin" line
May 24, 2014, 12:11:15 PM
hi all, A positive result will not change after testing your new miner, my rig ran slowly and hasrate decreased from 3.34 mhs to 3.1 mhs at my current Oc spec ( 1170/1500)
using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
using 13.12 , w7 64 bit, expecting an improved perfor. with 14.4
May 24, 2014, 12:02:02 PM
I cannot use this miner because it crashed when I put I 15 on my 270x and 290 non x. and it is slow when I put g2, w 128 and 8120 on my tc.
Jump to: