Seem's Legit. I am interested in mining now, Can I mine using online low graphics Nvidia Card like 750 Ti or something? How about the masternode, What is the minimum balance. I want to learn more.
Mining level has gone too much and this kind of mining was a high-level PoW mining coin called XDNA project. Yes, indeed. You can even use a crap graphics card but it won't take much speed. 
Topic: [ANN]XDNA-Revolution in cryptocurrency|POS|Charity Support|NoICO| - page 147. (Read 90307 times)
July 18, 2018, 04:06:36 AM
July 18, 2018, 02:41:58 AM
in fact, now I see a lot of comments that are skeptical about this project and express their suspicions that the idea of the project is not as profitable as developers think. Therefore, I would like to hear a developer's comment on how they look at this issue.
July 18, 2018, 01:58:07 AM
I think not any GPU mining is much profitable to any miner as this gives very less hashing powers and generate low income compared to the power they use. I think just mining with a hardware mainer specially designed for mining is the best way.`
To the best of my knowledge, there is no official hardware available for mining keccak algorithm. Although i do believe there are some mysterious ASICs (somehow patched Baikal miners as someone suggested above, or maybe somehow patched Bitmain hardware) that are doing 5+ TH/s at bsod.pw mining pool and perform 70+% of mining XDNA coin in total. Thus, more than a half newly mined coins go right into these mysterious pockets. And this fact definitely presents some danger for XDNA project.
July 18, 2018, 01:12:41 AM
High people!
I would like to share my experience of mining XDNA with various GPUs. As far as i can see, this kind of data is requested quite often and may be of some help to some people out here. All tests were done for 24 hours and more, so i'm pretty sure about all the data i'm about to state.
For solo mining i use 'ccminer 2.3 for nVidia GPUs by tpruvot@github'; for dual mining i use Claymore v11.9; solo mining with AMD is unprofitable. NVIDIAs are running under driver version 398.11; AMDs are running under Crimson Beta 2017 Aug 23 drivers, although you can use Catalyst 18.6.1 drivers and achieve same resuilts; i'm just too lazy and/or too busy to upgrade my software. All my rygs are running Windows 10 x64; this isn't good if you running half a hundred of various rygs, but i couldn't take time to solve linux problems (about controlling of voltage and fans, watchdogs, etc) and make good linux environment. But if you know what you're doing, you very well may achieve same or even better results under linux.
NVIDIA
1. GTX 1080TI.
Solo:
Power Limit: 108%
Core Clock: +180
Mem Clock: +0
This yields 1410-1430 MH/s
My opinion: unprofitable.
Dual: i'm using that famous 'Oh God An Eth Enlargement Pill', it does work with 1080TI.
Power Limit: 85%
Core Clock: +160
Mem Clock: +840
-dcri 20
This yields 50.6-50.9 MH/s of ETH + 335-340 MH/s of KECCAK
Thus, dual mining with 1080ti's is not very profitable because under these options for ETH solo mining you can yield 54-56 MH/s of ETH:
Power Limit: 75%
Core Clock: +0
Mem Clock: +900
I have 56.8 MH/s of ETH while running mining under +1000 Mem Clock, but this is stable only for 50-60% of my 1080TIs.
2. GTX 1080. This GPU is worthless for mining Ethereum, so i tested solo mining only
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 940-950 MH/s
My opinion: unprofitable. Something like Lyra2z or Lyra2Rev2 is more profitable.
3. GTX 1070
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 760-770 MH/s
My opinion: unprofitable.
Dual mining:
Power Limit: 85%
Core Clock: +50
Mem Clock: +700
-dcri 20
This yields 29.6-30 MH/s of ETH + 200 MH/s of KECCAK (while under Ethereum solo mining all i have is only 31.5-32 MH/s of ETH).
My opinion: profitable.
AMD
All bioses (except RX Vega 64) are properly flashed with suitable timings. You may visit anorak.tech to find suitable bioses and discussions.
1. Gigabyte Aorus RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 7
This yields 31.5-31.8 MH/s of ETH + 220 MH/s of KECCAK
Under Mem Clock: 2250 MHz (only 1 of my rygs could bear this) i have 32.1 MH/s of ETH + 225 MH/s of KECCAK
My opinion: profitable
2. Red Devil RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2150 MHz
Core Voltage: 952 mV
Mem Voltage: 962 mV
-dcri 6
This yields: 30.9-31.7 MH/s of ETH + 189 MH/s of KECCAK
(You may achieve better resuilts with Red Devils if you do Core Clock: 1220-1230 MHz, Mem Clock: 2180-2190 MHz, i tried that, but these cards became hot as hell, and i already have +35 degrees Celsium in my mining room this summer, so i wouldn't risk these cards and try to overclock maybe 3-4 months later)
My opinion: profitable.
3. Sapphire Pulse RX 580 8Gb with crappy Samsung memory:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 5
This yields: 31.1-31.3 MH/s of ETH + 156 MH/s of KECCAK
My opinion: good.
4. Sapphire Pulse RX 580 8Gb with best in the world Hynix memory:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 900 mV
Mem Voltage: 800 mV
-dcri 6
This yields: 31.9-32.1 MH/s of ETH + 190 MH/s of KECCAK
My opinion: profitable
5. Sapphire Pulse RX570 4Gb:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 905 mV
Mem Voltage: 905 mV
-dcri 6
This yields: 31.7-31.9 MH/s of ETH + 160 MH/s of KECCAK
My opinion: extremely profitable. These cards are cheap as shit now. And according to GPU-Z they consume only 101-103 W under dual mining (while RX580+8Gb consume 125-145 W).
Ok i'm tired now, and if there will be interested, i may go on describing NVIDIA P106-100, P104-100, P102-100, 980TI, RX VEGA 64, RX 470, etc, etc where i tried single and dual mining. Feel free to ask any questions, perhaps this little paper will evolve to a good mining guide and help improve building XDNA community.
I think not any GPU mining is much profitable to any miner as this gives very less hashing powers and generate low income compared to the power they use. I think just mining with a hardware mainer specially designed for mining is the best way.` I would like to share my experience of mining XDNA with various GPUs. As far as i can see, this kind of data is requested quite often and may be of some help to some people out here. All tests were done for 24 hours and more, so i'm pretty sure about all the data i'm about to state.
For solo mining i use 'ccminer 2.3 for nVidia GPUs by tpruvot@github'; for dual mining i use Claymore v11.9; solo mining with AMD is unprofitable. NVIDIAs are running under driver version 398.11; AMDs are running under Crimson Beta 2017 Aug 23 drivers, although you can use Catalyst 18.6.1 drivers and achieve same resuilts; i'm just too lazy and/or too busy to upgrade my software. All my rygs are running Windows 10 x64; this isn't good if you running half a hundred of various rygs, but i couldn't take time to solve linux problems (about controlling of voltage and fans, watchdogs, etc) and make good linux environment. But if you know what you're doing, you very well may achieve same or even better results under linux.
NVIDIA
1. GTX 1080TI.
Solo:
Power Limit: 108%
Core Clock: +180
Mem Clock: +0
This yields 1410-1430 MH/s
My opinion: unprofitable.
Dual: i'm using that famous 'Oh God An Eth Enlargement Pill', it does work with 1080TI.
Power Limit: 85%
Core Clock: +160
Mem Clock: +840
-dcri 20
This yields 50.6-50.9 MH/s of ETH + 335-340 MH/s of KECCAK
Thus, dual mining with 1080ti's is not very profitable because under these options for ETH solo mining you can yield 54-56 MH/s of ETH:
Power Limit: 75%
Core Clock: +0
Mem Clock: +900
I have 56.8 MH/s of ETH while running mining under +1000 Mem Clock, but this is stable only for 50-60% of my 1080TIs.
2. GTX 1080. This GPU is worthless for mining Ethereum, so i tested solo mining only
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 940-950 MH/s
My opinion: unprofitable. Something like Lyra2z or Lyra2Rev2 is more profitable.
3. GTX 1070
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 760-770 MH/s
My opinion: unprofitable.
Dual mining:
Power Limit: 85%
Core Clock: +50
Mem Clock: +700
-dcri 20
This yields 29.6-30 MH/s of ETH + 200 MH/s of KECCAK (while under Ethereum solo mining all i have is only 31.5-32 MH/s of ETH).
My opinion: profitable.
AMD
All bioses (except RX Vega 64) are properly flashed with suitable timings. You may visit anorak.tech to find suitable bioses and discussions.
1. Gigabyte Aorus RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 7
This yields 31.5-31.8 MH/s of ETH + 220 MH/s of KECCAK
Under Mem Clock: 2250 MHz (only 1 of my rygs could bear this) i have 32.1 MH/s of ETH + 225 MH/s of KECCAK
My opinion: profitable
2. Red Devil RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2150 MHz
Core Voltage: 952 mV
Mem Voltage: 962 mV
-dcri 6
This yields: 30.9-31.7 MH/s of ETH + 189 MH/s of KECCAK
(You may achieve better resuilts with Red Devils if you do Core Clock: 1220-1230 MHz, Mem Clock: 2180-2190 MHz, i tried that, but these cards became hot as hell, and i already have +35 degrees Celsium in my mining room this summer, so i wouldn't risk these cards and try to overclock maybe 3-4 months later)
My opinion: profitable.
3. Sapphire Pulse RX 580 8Gb with crappy Samsung memory:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 5
This yields: 31.1-31.3 MH/s of ETH + 156 MH/s of KECCAK
My opinion: good.
4. Sapphire Pulse RX 580 8Gb with best in the world Hynix memory:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 900 mV
Mem Voltage: 800 mV
-dcri 6
This yields: 31.9-32.1 MH/s of ETH + 190 MH/s of KECCAK
My opinion: profitable
5. Sapphire Pulse RX570 4Gb:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 905 mV
Mem Voltage: 905 mV
-dcri 6
This yields: 31.7-31.9 MH/s of ETH + 160 MH/s of KECCAK
My opinion: extremely profitable. These cards are cheap as shit now. And according to GPU-Z they consume only 101-103 W under dual mining (while RX580+8Gb consume 125-145 W).
Ok i'm tired now, and if there will be interested, i may go on describing NVIDIA P106-100, P104-100, P102-100, 980TI, RX VEGA 64, RX 470, etc, etc where i tried single and dual mining. Feel free to ask any questions, perhaps this little paper will evolve to a good mining guide and help improve building XDNA community.
July 17, 2018, 11:32:22 PM
High people!
I would like to share my experience of mining XDNA with various GPUs. As far as i can see, this kind of data is requested quite often and may be of some help to some people out here. All tests were done for 24 hours and more, so i'm pretty sure about all the data i'm about to state.
For solo mining i use 'ccminer 2.3 for nVidia GPUs by tpruvot@github'; for dual mining i use Claymore v11.9; solo mining with AMD is unprofitable. NVIDIAs are running under driver version 398.11; AMDs are running under Crimson Beta 2017 Aug 23 drivers, although you can use Catalyst 18.6.1 drivers and achieve same resuilts; i'm just too lazy and/or too busy to upgrade my software. All my rygs are running Windows 10 x64; this isn't good if you running half a hundred of various rygs, but i couldn't take time to solve linux problems (about controlling of voltage and fans, watchdogs, etc) and make good linux environment. But if you know what you're doing, you very well may achieve same or even better results under linux.
NVIDIA
1. GTX 1080TI.
Solo:
Power Limit: 108%
Core Clock: +180
Mem Clock: +0
This yields 1410-1430 MH/s
My opinion: unprofitable.
Dual: i'm using that famous 'Oh God An Eth Enlargement Pill', it does work with 1080TI.
Power Limit: 85%
Core Clock: +160
Mem Clock: +840
-dcri 20
This yields 50.6-50.9 MH/s of ETH + 335-340 MH/s of KECCAK
Thus, dual mining with 1080ti's is not very profitable because under these options for ETH solo mining you can yield 54-56 MH/s of ETH:
Power Limit: 75%
Core Clock: +0
Mem Clock: +900
I have 56.8 MH/s of ETH while running mining under +1000 Mem Clock, but this is stable only for 50-60% of my 1080TIs.
2. GTX 1080. This GPU is worthless for mining Ethereum, so i tested solo mining only
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 940-950 MH/s
My opinion: unprofitable. Something like Lyra2z or Lyra2Rev2 is more profitable.
3. GTX 1070
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 760-770 MH/s
My opinion: unprofitable.
Dual mining:
Power Limit: 85%
Core Clock: +50
Mem Clock: +700
-dcri 20
This yields 29.6-30 MH/s of ETH + 200 MH/s of KECCAK (while under Ethereum solo mining all i have is only 31.5-32 MH/s of ETH).
My opinion: profitable.
AMD
All bioses (except RX Vega 64) are properly flashed with suitable timings. You may visit anorak.tech to find suitable bioses and discussions.
1. Gigabyte Aorus RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 7
This yields 31.5-31.8 MH/s of ETH + 220 MH/s of KECCAK
Under Mem Clock: 2250 MHz (only 1 of my rygs could bear this) i have 32.1 MH/s of ETH + 225 MH/s of KECCAK
My opinion: profitable
2. Red Devil RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2150 MHz
Core Voltage: 952 mV
Mem Voltage: 962 mV
-dcri 6
This yields: 30.9-31.7 MH/s of ETH + 189 MH/s of KECCAK
(You may achieve better resuilts with Red Devils if you do Core Clock: 1220-1230 MHz, Mem Clock: 2180-2190 MHz, i tried that, but these cards became hot as hell, and i already have +35 degrees Celsium in my mining room this summer, so i wouldn't risk these cards and try to overclock maybe 3-4 months later)
My opinion: profitable.
3. Sapphire Pulse RX 580 8Gb with crappy Samsung memory:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 5
This yields: 31.1-31.3 MH/s of ETH + 156 MH/s of KECCAK
My opinion: good.
4. Sapphire Pulse RX 580 8Gb with best in the world Hynix memory:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 900 mV
Mem Voltage: 800 mV
-dcri 6
This yields: 31.9-32.1 MH/s of ETH + 190 MH/s of KECCAK
My opinion: profitable
5. Sapphire Pulse RX570 4Gb:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 905 mV
Mem Voltage: 905 mV
-dcri 6
This yields: 31.7-31.9 MH/s of ETH + 160 MH/s of KECCAK
My opinion: extremely profitable. These cards are cheap as shit now. And according to GPU-Z they consume only 101-103 W under dual mining (while RX580+8Gb consume 125-145 W).
Ok i'm tired now, and if there will be interested, i may go on describing NVIDIA P106-100, P104-100, P102-100, 980TI, RX VEGA 64, RX 470, etc, etc where i tried single and dual mining. Feel free to ask any questions, perhaps this little paper will evolve to a good mining guide and help improve building XDNA community.
I would like to share my experience of mining XDNA with various GPUs. As far as i can see, this kind of data is requested quite often and may be of some help to some people out here. All tests were done for 24 hours and more, so i'm pretty sure about all the data i'm about to state.
For solo mining i use 'ccminer 2.3 for nVidia GPUs by tpruvot@github'; for dual mining i use Claymore v11.9; solo mining with AMD is unprofitable. NVIDIAs are running under driver version 398.11; AMDs are running under Crimson Beta 2017 Aug 23 drivers, although you can use Catalyst 18.6.1 drivers and achieve same resuilts; i'm just too lazy and/or too busy to upgrade my software. All my rygs are running Windows 10 x64; this isn't good if you running half a hundred of various rygs, but i couldn't take time to solve linux problems (about controlling of voltage and fans, watchdogs, etc) and make good linux environment. But if you know what you're doing, you very well may achieve same or even better results under linux.
NVIDIA
1. GTX 1080TI.
Solo:
Power Limit: 108%
Core Clock: +180
Mem Clock: +0
This yields 1410-1430 MH/s
My opinion: unprofitable.
Dual: i'm using that famous 'Oh God An Eth Enlargement Pill', it does work with 1080TI.
Power Limit: 85%
Core Clock: +160
Mem Clock: +840
-dcri 20
This yields 50.6-50.9 MH/s of ETH + 335-340 MH/s of KECCAK
Thus, dual mining with 1080ti's is not very profitable because under these options for ETH solo mining you can yield 54-56 MH/s of ETH:
Power Limit: 75%
Core Clock: +0
Mem Clock: +900
I have 56.8 MH/s of ETH while running mining under +1000 Mem Clock, but this is stable only for 50-60% of my 1080TIs.
2. GTX 1080. This GPU is worthless for mining Ethereum, so i tested solo mining only
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 940-950 MH/s
My opinion: unprofitable. Something like Lyra2z or Lyra2Rev2 is more profitable.
3. GTX 1070
Solo mining:
Power Limit: 90%
Core Clock: +150
Mem Clock: +200
This yields 760-770 MH/s
My opinion: unprofitable.
Dual mining:
Power Limit: 85%
Core Clock: +50
Mem Clock: +700
-dcri 20
This yields 29.6-30 MH/s of ETH + 200 MH/s of KECCAK (while under Ethereum solo mining all i have is only 31.5-32 MH/s of ETH).
My opinion: profitable.
AMD
All bioses (except RX Vega 64) are properly flashed with suitable timings. You may visit anorak.tech to find suitable bioses and discussions.
1. Gigabyte Aorus RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 7
This yields 31.5-31.8 MH/s of ETH + 220 MH/s of KECCAK
Under Mem Clock: 2250 MHz (only 1 of my rygs could bear this) i have 32.1 MH/s of ETH + 225 MH/s of KECCAK
My opinion: profitable
2. Red Devil RX580 8Gb:
Core Clock: 1200 MHz
Mem Clock: 2150 MHz
Core Voltage: 952 mV
Mem Voltage: 962 mV
-dcri 6
This yields: 30.9-31.7 MH/s of ETH + 189 MH/s of KECCAK
(You may achieve better resuilts with Red Devils if you do Core Clock: 1220-1230 MHz, Mem Clock: 2180-2190 MHz, i tried that, but these cards became hot as hell, and i already have +35 degrees Celsium in my mining room this summer, so i wouldn't risk these cards and try to overclock maybe 3-4 months later)
My opinion: profitable.
3. Sapphire Pulse RX 580 8Gb with crappy Samsung memory:
Core Clock: 1200 MHz
Mem Clock: 2200 MHz
Core Voltage: 900 mV
Mem Voltage: 900 mV
-dcri 5
This yields: 31.1-31.3 MH/s of ETH + 156 MH/s of KECCAK
My opinion: good.
4. Sapphire Pulse RX 580 8Gb with best in the world Hynix memory:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 900 mV
Mem Voltage: 800 mV
-dcri 6
This yields: 31.9-32.1 MH/s of ETH + 190 MH/s of KECCAK
My opinion: profitable
5. Sapphire Pulse RX570 4Gb:
Core Clock: 1200 MHz
Mem Clock: 2250 MHz
Core Voltage: 905 mV
Mem Voltage: 905 mV
-dcri 6
This yields: 31.7-31.9 MH/s of ETH + 160 MH/s of KECCAK
My opinion: extremely profitable. These cards are cheap as shit now. And according to GPU-Z they consume only 101-103 W under dual mining (while RX580+8Gb consume 125-145 W).
Ok i'm tired now, and if there will be interested, i may go on describing NVIDIA P106-100, P104-100, P102-100, 980TI, RX VEGA 64, RX 470, etc, etc where i tried single and dual mining. Feel free to ask any questions, perhaps this little paper will evolve to a good mining guide and help improve building XDNA community.
July 17, 2018, 10:26:11 PM
Seem's Legit. I am interested in mining now, Can I mine using online low graphics Nvidia Card like 750 Ti or something? How about the masternode, What is the minimum balance. I want to learn more.
there are 3 different tiers to the masternode collaterals : 1000, 3000, and 5000
I think you will have to give big time and effort just to test and mine this coin, and its price today suddenly drop less than 10%. if you want there are an alternative ways to earn and gain like joining their bounty campaigns.
July 17, 2018, 09:56:35 PM
Seem's Legit. I am interested in mining now, Can I mine using online low graphics Nvidia Card like 750 Ti or something? How about the masternode, What is the minimum balance. I want to learn more.
there are 3 different tiers to the masternode collaterals : 1000, 3000, and 5000
July 17, 2018, 09:53:51 PM
Seem's Legit. I am interested in mining now, Can I mine using online low graphics Nvidia Card like 750 Ti or something? How about the masternode, What is the minimum balance. I want to learn more.
July 17, 2018, 06:59:02 PM
Well, we still at start of building "revolution in mining"? I really have surprised about "Dual Mining" at XDNA, it will help us have more profit at mining?
Well, this is new for me and I am curious and want to know more details about this new project and how this dual mining at xdna will work. Also is this need high specifications to make the mining profitable? Looking forward for more details soon.
July 17, 2018, 06:43:53 PM
Well, we still at start of building "revolution in mining"? I really have surprised about "Dual Mining" at XDNA, it will help us have more profit at mining?
July 17, 2018, 06:24:27 PM
Well, good project. How can i explore information about XDNA blockchain? I want tracking how much blockchain we are mined.
July 17, 2018, 05:41:59 PM
How exactly can you use your mobile wallets? Can I use them to mine coins? And what exactly will the coins be mined and supported by your purse?
July 17, 2018, 05:40:15 PM
I read that you already have ready wallets for Windows, Linux and MacOS, and mobile versions will be released soon. I'm interested in when specifically we can use the purse version for smartphones?
Same here. I wanted to know when is the exact date of launching mobile versions as this will be a big advantage for them to have an easy and convenient way of experiencing on this kind of project. Much better if the team can provide further details on this matter so that people will have an idea. July 17, 2018, 05:32:42 PM
multi-level masternodes concept seems like a good idea because it solves big problem that old traditional masternode has, the amount of reward decrease when number of masternode increase. With multi-level masternodes solution that will not the case.
July 17, 2018, 05:30:35 PM
I have so understood the platform will be similar something with social networks, to have the same focus? I not absolutely see the purpose and in what there will be the main difference between simple social networks and this project? Interest unique abilities.
July 17, 2018, 05:23:26 PM
Hello! What coins will be produced from you? And how can this be done? Will I need to download a purse or another mining program?
July 17, 2018, 05:19:53 PM
I read that you already have ready wallets for Windows, Linux and MacOS, and mobile versions will be released soon. I'm interested in when specifically we can use the purse version for smartphones?
That depends on our choice and comfort however wallet release on various versions will bring more choice even from many users this helps me to easily handle and ve a part of project with my smart phone. July 17, 2018, 05:11:09 PM
I read that you already have ready wallets for Windows, Linux and MacOS, and mobile versions will be released soon. I'm interested in when specifically we can use the purse version for smartphones?
That depends on our choice and comfort however wallet release on various versions will bring more choice even from many users this helps me to easily handle and ve a part of project with my smart phone. July 17, 2018, 05:07:39 PM
I wonder why the bounty programs only have 50k tokens allocated. It seems very little amount to earned in which can't possibly attract more people to joined on it. However, it can be a good choiced for investors to joined on this project because there will be no dumping of coins will be happen.
Masternode plus total supply of the token might be the reason i think the coin doenst have the large digit and i think if you work hard enough on bounty you might afford masternode July 17, 2018, 04:20:45 PM
I read that you already have ready wallets for Windows, Linux and MacOS, and mobile versions will be released soon. I'm interested in when specifically we can use the purse version for smartphones?
That depends on our choice and comfort however wallet release on various versions will bring more choice even from many users this helps me to easily handle and ve a part of project with my smart phone.They should consider the statistics right now of smartphone users and also the hype of rising smartphones. They must tap the market of mobile industry because it has a lot of people than any devices.
Jump to: