[ANN][YAC] YACoin ongoing development - page 6.

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 24, 2018, 05:24:29 AM

Quote from: minerja on October 24, 2018, 05:20:29 AM

Use the bootstrap and just use 0.4.4 qt and daemon files

https://mega.nz/#!iEVjzCpB!3Qfb-QCX_EIQUgmeGQHhYc5XbYtvyZEKbLSKslLFUM0

Thanks, just trying, but ARGH ! "verifying last 666 blocks", that stage takes at least 10-15 mins every time...why?

If you use the bootset for 0.4.9 and run yQt.bat (pointed to YACoinDataDirectory), you should see that speed up. Ron can comment on that further. It was another improvement with 0.4.9.
[/quote]

Oh mate, i can't believe it, seriously been PMSL, i have tried this about 8 times now on each of 2 machines....so i have just tried again as per your suggestion....everything is different....not verifying 666 blocks, but only 15, so wallet opened, and re-closed....copied over my .dat file, opened in about 1-2 mins max, and is now syncing.....syncing is verry slow, but wallet is working
I don't know why i have had so many probs over last 3 weeks with tis wallet, but seems fine now.
So a massive Thankyou.

oh btw, got my hashrates mixed up (they were for Ultracoin). I get 23 H/s with YACin, and nethash was 653H/s last time i checked, so i'm roughly 1/25th of total net hash.
Once again Thankyou...hopefully mining in 379 blocks....wow, this sync is slowwww.

Beave162

hero member

Activity: 809

Merit: 501

Quote from: minerja on October 24, 2018, 05:20:29 AM

Use the bootstrap and just use 0.4.4 qt and daemon files

https://mega.nz/#!iEVjzCpB!3Qfb-QCX_EIQUgmeGQHhYc5XbYtvyZEKbLSKslLFUM0

Thanks, just trying, but ARGH ! "verifying last 666 blocks", that stage takes at least 10-15 mins every time...why?
[/quote]

If you use the bootset for 0.4.9 and run yQt.bat (pointed to YACoinDataDirectory), you should see that speed up. Ron can comment on that further. It was another improvement with 0.4.9.

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 24, 2018, 05:16:40 AM

Quote from: minerja on October 24, 2018, 05:10:00 AM

Quote from: Beave162 on October 24, 2018, 04:42:19 AM

Quote from: minerja on October 24, 2018, 04:17:01 AM

Hi, erm, i know it shouldnt take too long to load, but they are my load times across to different PCs, everytime...i even did a full clean install Win 7 and Win 10, and still useless...
Also, 1 block every 1-2 days, really....it takes 10 blocks to earn $1, so it will take me 10-20 days to earn 1$1, that makes this coin completely out of touch with reality...such a shame
I think it needs forking, and modernising.

Yes indeed. Upgrade fork is coming soon.

I don't have any issues running the current wallet. Try waiting 1-2 minutes to see if it works. If not, try removing all files (except your wallet.dat of course), and reload using the bootset. https://mega.nz/#!LV1kgCyY!QNgcO_W3ga9OEygvwGPS6ltsTdxWq-pRL89j2d0cemw

Can the datafiles from that bootset be used with 0.4.4 please?

Use the bootstrap and just use 0.4.4 qt and daemon files

https://mega.nz/#!iEVjzCpB!3Qfb-QCX_EIQUgmeGQHhYc5XbYtvyZEKbLSKslLFUM0

Thanks, just trying, but ARGH ! "verifying last 666 blocks", that stage takes at least 10-15 mins every time...why?

Beave162

hero member

Activity: 809

Merit: 501

Quote from: minerja on October 24, 2018, 05:10:00 AM

Quote from: Beave162 on October 24, 2018, 04:42:19 AM

Quote from: minerja on October 24, 2018, 04:17:01 AM

Hi, erm, i know it shouldnt take too long to load, but they are my load times across to different PCs, everytime...i even did a full clean install Win 7 and Win 10, and still useless...
Also, 1 block every 1-2 days, really....it takes 10 blocks to earn $1, so it will take me 10-20 days to earn 1$1, that makes this coin completely out of touch with reality...such a shame
I think it needs forking, and modernising.

Yes indeed. Upgrade fork is coming soon.

I don't have any issues running the current wallet. Try waiting 1-2 minutes to see if it works. If not, try removing all files (except your wallet.dat of course), and reload using the bootset. https://mega.nz/#!LV1kgCyY!QNgcO_W3ga9OEygvwGPS6ltsTdxWq-pRL89j2d0cemw

Can the datafiles from that bootset be used with 0.4.4 please?

Use the bootstrap and just use 0.4.4 qt and daemon files

https://mega.nz/#!iEVjzCpB!3Qfb-QCX_EIQUgmeGQHhYc5XbYtvyZEKbLSKslLFUM0

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 24, 2018, 04:42:19 AM

Quote from: minerja on October 24, 2018, 04:17:01 AM

Hi, erm, i know it shouldnt take too long to load, but they are my load times across to different PCs, everytime...i even did a full clean install Win 7 and Win 10, and still useless...
Also, 1 block every 1-2 days, really....it takes 10 blocks to earn $1, so it will take me 10-20 days to earn 1$1, that makes this coin completely out of touch with reality...such a shame
I think it needs forking, and modernising.

Yes indeed. Upgrade fork is coming soon.

I don't have any issues running the current wallet. Try waiting 1-2 minutes to see if it works. If not, try removing all files (except your wallet.dat of course), and reload using the bootset. https://mega.nz/#!LV1kgCyY!QNgcO_W3ga9OEygvwGPS6ltsTdxWq-pRL89j2d0cemw

Can the datafiles from that bootset be used with 0.4.4 please?

Beave162

hero member

Activity: 809

Merit: 501

Quote from: minerja on October 24, 2018, 04:17:01 AM

Hi, erm, i know it shouldnt take too long to load, but they are my load times across to different PCs, everytime...i even did a full clean install Win 7 and Win 10, and still useless...
Also, 1 block every 1-2 days, really....it takes 10 blocks to earn $1, so it will take me 10-20 days to earn 1$1, that makes this coin completely out of touch with reality...such a shame
I think it needs forking, and modernising.

Yes indeed. Upgrade fork is coming soon.

I don't have any issues running the current wallet. Try waiting 1-2 minutes to see if it works. If not, try removing all files (except your wallet.dat of course), and reload using the bootset. https://mega.nz/#!LV1kgCyY!QNgcO_W3ga9OEygvwGPS6ltsTdxWq-pRL89j2d0cemw

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 24, 2018, 04:01:03 AM

Quote from: minerja on October 24, 2018, 02:47:09 AM

Biggest problem with YACoin, is how long the wallet takes to load.
Using an SSD, Ryzen 7 system, it can take 10-15 mins to load, and then it repeatedly says" not responding". Tried both 4.4 and 4.9...over 2 diff pc's (1 Win 7 , 1 Win 10)

Other issue is, we need a pool....my hash rate is 14kh/s and current net hash is 1200kh/s (usually 2500kh/s upwards) so virtually no chance to solo mine.

The network is well below the minimum difficulty, so the total hashrate is meaningless. At 14 kH/s, you should be find a block every 1-2 days.

It shouldn't take too long to load. Make sure you close it running in the background whenever you do a restart.

Hi, erm, i know it shouldnt take too long to load, but they are my load times across to different PCs, everytime...i even did a full clean install Win 7 and Win 10, and still useless...
Also, 1 block every 1-2 days, really....it takes 10 blocks to earn $1, so it will take me 10-20 days to earn 1$1, that makes this coin completely out of touch with reality...such a shame
I think it needs forking, and modernising.

Beave162

hero member

Activity: 809

Merit: 501

Quote from: minerja on October 24, 2018, 02:47:09 AM

Biggest problem with YACoin, is how long the wallet takes to load.
Using an SSD, Ryzen 7 system, it can take 10-15 mins to load, and then it repeatedly says" not responding". Tried both 4.4 and 4.9...over 2 diff pc's (1 Win 7 , 1 Win 10)

Other issue is, we need a pool....my hash rate is 14kh/s and current net hash is 1200kh/s (usually 2500kh/s upwards) so virtually no chance to solo mine.

The network is well below the minimum difficulty, so the total hashrate is meaningless. At 14 kH/s, you should be find a block every 1-2 days.

It shouldn't take too long to load. Make sure you close it running in the background whenever you do a restart.

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 24, 2018, 01:19:24 AM

Quote from: igorsantos on October 22, 2018, 07:51:02 PM

Quote from: minerja on October 19, 2018, 02:19:30 AM

Quote from: igorsantos on October 18, 2018, 11:18:12 AM

30 H / s on a gtx 1060 be right? Huh

30 H/s ! Wow. What miner and setting are you using please, i get much less than that on my 1060 6gb (about 21 h/s, and about 17 H/s on 3GB)

J

I think that this configuration was wrong, because it spent a few hours and could not find any blocks, then I did a test with auto-tuning after a few hours also no block.

I'd take hashrates from ccminer with a grain of salt. The way YACoin's difficulty currently adjusts, there isn't a good way to check your actual share rate / profitability. It will be addressed soon though.

Biggest problem with YACoin, is how long the wallet takes to load.
Using an SSD, Ryzen 7 system, it can take 10-15 mins to load, and then it repeatedly says" not responding". Tried both 4.4 and 4.9...over 2 diff pc's (1 Win 7 , 1 Win 10)

Other issue is, we need a pool....my hash rate is 14kh/s and current net hash is 1200kh/s (usually 2500kh/s upwards) so virtually no chance to solo mine.

Beave162

hero member

Activity: 809

Merit: 501

Quote from: igorsantos on October 22, 2018, 07:51:02 PM

Quote from: minerja on October 19, 2018, 02:19:30 AM

Quote from: igorsantos on October 18, 2018, 11:18:12 AM

30 H / s on a gtx 1060 be right? Huh

30 H/s ! Wow. What miner and setting are you using please, i get much less than that on my 1060 6gb (about 21 h/s, and about 17 H/s on 3GB)

J

I think that this configuration was wrong, because it spent a few hours and could not find any blocks, then I did a test with auto-tuning after a few hours also no block.

I'd take hashrates from ccminer with a grain of salt. The way YACoin's difficulty currently adjusts, there isn't a good way to check your actual share rate / profitability. It will be addressed soon though.

igorsantos

member

Activity: 179

Merit: 10

Quote from: minerja on October 19, 2018, 02:19:30 AM

Quote from: igorsantos on October 18, 2018, 11:18:12 AM

30 H / s on a gtx 1060 be right? Huh

30 H/s ! Wow. What miner and setting are you using please, i get much less than that on my 1060 6gb (about 21 h/s, and about 17 H/s on 3GB)

J

I think that this configuration was wrong, because it spent a few hours and could not find any blocks, then I did a test with auto-tuning after a few hours also no block.

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: igorsantos on October 18, 2018, 11:18:12 AM

30 H / s on a gtx 1060 be right? Huh

30 H/s ! Wow. What miner and setting are you using please, i get much less than that on my 1060 6gb (about 21 h/s, and about 17 H/s on 3GB)

J

igorsantos

member

Activity: 179

Merit: 10

30 H / s on a gtx 1060 be right? Huh

minerja

sr. member

Activity: 1249

Merit: 297

Quote from: Beave162 on October 18, 2018, 02:44:29 AM

Quote from: minerja on October 18, 2018, 02:35:46 AM

Hi Guys,

Been using old wallet, but no connections for last 24 hours
Tried 4.9, same, no peers....
Explorer doesnt show any...
How do we find some please?
J

94.130.64.167
66.176.169.30
150.254.109.73
193.77.45.161
193.136.98.184
46.4.79.187

Thankyou

Beave162

hero member

Activity: 809

Merit: 501

Quote from: minerja on October 18, 2018, 02:35:46 AM

Hi Guys,

Been using old wallet, but no connections for last 24 hours
Tried 4.9, same, no peers....
Explorer doesnt show any...
How do we find some please?
J

94.130.64.167
66.176.169.30
150.254.109.73
193.77.45.161
193.136.98.184
46.4.79.187

minerja

sr. member

Activity: 1249

Merit: 297

Hi Guys,

Been using old wallet, but no connections for last 24 hours
Tried 4.9, same, no peers....
Explorer doesnt show any...
How do we find some please?
J

Finally, after nearly 27 hours, wallet all synced....1 node....BUT why everytime i launch wallet does it re-verify last 700+ blocks, it takes over 15 mins to open wallet each time....crazy
Also, is 0.4.9 on correct chain cos it says "TESTING" ?

Beave162

hero member

Activity: 809

Merit: 501

Here is an updated bootset for 0.4.9 for now. In the near future, there will be a better way to bootstrap the entire dataset without have to sync the wallet from the beginning.

https://mega.nz/#!LV1kgCyY!QNgcO_W3ga9OEygvwGPS6ltsTdxWq-pRL89j2d0cemw

old c coder

sr. member

Activity: 260

Merit: 251

Quote from: igorsantos on October 06, 2018, 09:49:22 AM

Quote from: Beave162 on October 04, 2018, 07:41:22 PM

YACoin 0.4.9 Official Release!
Notable features include:
- built-in block explorer
- price fetcher - located in the block explorer or with the command "getyacprice" in the command-line interface (requires server.pem file)
- built-in CPU miner added back in (activate with gen=1)
- LevelDB in place of Berkeley DB
- Various 'clean-up' items in the code--setting the stage for YACoin 1.0.0

YACoin 0.4.9 'officially' released. Binaries on yacoin.org have been updated. The Github repo master has been updated and 0.4.9 source code available under "releases."

YACoin has been out unofficially for a long time. But the final touches and testing was just completed. Feedback is very welcome. There is no pool, but many CPUs are profitable mining YACoin even in this depressed crypto-ecosystem.

what's wrong?stuck wallet.
10/06/18 14:46:06 disconnecting node 94.130.64.167:7688
10/06/18 14:46:06 getsockopt( SO_ERROR ) failed with error code = 10038
10/06/18 14:46:09 socket recv error 10054 (An existing connection was forcibly closed by the remote host.

)
10/06/18 14:46:09 disconnecting node 46.4.79.187:7688
10/06/18 14:46:09 getsockopt( SO_ERROR ) failed with error code = 10038
10/06/18 14:46:10 connection timeout 80.143.179.135:7688
10/06/18 14:46:21 connection timeout 27.42.147.151:7688

are you still connected to any peers? getPeerInfo, etc. If so, then that's OK. Otherwise just wait and you will get more nodes.

Ron

igorsantos

member

Activity: 179

Merit: 10

Quote from: Beave162 on October 04, 2018, 07:41:22 PM

YACoin 0.4.9 Official Release!
Notable features include:
- built-in block explorer
- price fetcher - located in the block explorer or with the command "getyacprice" in the command-line interface (requires server.pem file)
- built-in CPU miner added back in (activate with gen=1)
- LevelDB in place of Berkeley DB
- Various 'clean-up' items in the code--setting the stage for YACoin 1.0.0

YACoin 0.4.9 'officially' released. Binaries on yacoin.org have been updated. The Github repo master has been updated and 0.4.9 source code available under "releases."

YACoin has been out unofficially for a long time. But the final touches and testing was just completed. Feedback is very welcome. There is no pool, but many CPUs are profitable mining YACoin even in this depressed crypto-ecosystem.

what's wrong?stuck wallet.
10/06/18 14:46:06 disconnecting node 94.130.64.167:7688
10/06/18 14:46:06 getsockopt( SO_ERROR ) failed with error code = 10038
10/06/18 14:46:09 socket recv error 10054 (An existing connection was forcibly closed by the remote host.

)
10/06/18 14:46:09 disconnecting node 46.4.79.187:7688
10/06/18 14:46:09 getsockopt( SO_ERROR ) failed with error code = 10038
10/06/18 14:46:10 connection timeout 80.143.179.135:7688
10/06/18 14:46:21 connection timeout 27.42.147.151:7688

igorsantos

member

Activity: 179

Merit: 10

any bootstrap?

Topic: [ANN][YAC] YACoin ongoing development - page 6. (Read 380060 times)