Antminer D3 Blissz firmware (10/12 v1.12 update) - page 31.

blissz

sr. member

Activity: 336

Merit: 258

Quote from: ?? on ??

Quote from: blissz on December 15, 2017, 02:53:35 AM

Quote from: ?? on ??

hi @blissz,

do you know who is this guy "koffee.1" after 24 hours, with firmware v1.11 the D3 worker changed to that guy ?
my D3 is rented !

I have no clue really...

Hi Blissz,

your firmware is really cool, i love it very much.
But the fact is that , I tried with firmware 1.11 and 1.12, after almost a day running , suddenly my worker is changed to "koffee.1".
It is really strange . My renter at MRR inform it to me, that the D3 does not work for him anymore.

I sadly have to back to stock firmware.

Please investigate the case, find out issue, so that i could come back to your awsome firmware.

Thanks

I'm pretty sure someone is on your network changing it then. Update passwords

martyshmoo

newbie

Activity: 56

Merit: 0

Quote from: blissz on December 15, 2017, 02:51:48 AM

Quote from: martyshmoo on December 15, 2017, 01:56:32 AM

Quote from: Knightslugger on December 14, 2017, 09:50:34 PM

after you set autotune, are you guys rebooting or just letting it be after clicking Save&Apply?

I am trying autotune on 14Volts now for a good daytime setting.

It never really mines though...

All shares rejected but 2.

I found 11 Blocks for you though?

Man this version not cool yet.

My Miner never actually mines!

What to do!???

Patient one.

M

Sorry this beta version is definitely not yet ready for that as it starts at a way too low frequency which will mess things up. I am working on a next beta version that should improve the things I've seen. Can you PM your kernel log? Thanks

Also, It is still performing an API IP search and it takes 5 mins to start. not the old 3.

M

Nd this is an issue every reboot still:

Dec 15 08:32:36 (none) local0.err cgminer[4621]: cgminer time error total_secs = 1513326756.076018 last_total_secs = 1.000000
Dec 15 08:32:36 (none) local0.warn cgminer[4621]: Pool 0 stratum+tcp://dash.coinmine.pl:6099 alive, testing stability
Dec 15 08:32:36 (none) local0.warn cgminer[4621]: Switching to pool 0 stratum+tcp://dash.coinmine.pl:6099
Dec 15 08:32:42 (none) local0.warn cgminer[4621]: API running in IP access mode on port 4028 (15)

This makes it 5 min;s to reboot.

martyshmoo

newbie

Activity: 56

Merit: 0

Quote from: blissz on December 15, 2017, 02:51:48 AM

Quote from: martyshmoo on December 15, 2017, 01:56:32 AM

Quote from: Knightslugger on December 14, 2017, 09:50:34 PM

after you set autotune, are you guys rebooting or just letting it be after clicking Save&Apply?

I am trying autotune on 14Volts now for a good daytime setting.

It never really mines though...

All shares rejected but 2.

I found 11 Blocks for you though?

Man this version not cool yet.

My Miner never actually mines!

What to do!???

Patient one.

M

Sorry this beta version is definitely not yet ready for that as it starts at a way too low frequency which will mess things up. I am working on a next beta version that should improve the things I've seen. Can you PM your kernel log? Thanks

Blissz,

Yes, I see this, combine that with a coincidental internet weakness or choppy signal, I had...

I went back to 10/12 for now and it is indeed mining, and sharing.

I sent my logs already. (2).

All shares were rejected during those two logs.

But it Might of been the Inet at fault. But 2 shares received and 264 rejected at Dash.pool.pl

M

donalduck

newbie

Activity: 19

Merit: 0

Auto tune works great for me at 5 Volts. Thanks blissz.

thesavoyard

sr. member

Activity: 560

Merit: 253

I've run this firmware for about a week. I had board 3 go down and have HW errors but a restart fixed it. I need to fix the ventilation in my sound reducing box, board 3 runs too hot. I've just been too busy to work on it. Now that my wife has put away the flex duct I bought, it'll probably take a week to find it. Cheesy

fecell

jr. member

Activity: 136

Merit: 2

(извинитe зa oфтoп)

Sorry bro, but "autotune" is a self-destruction option for D3.
I try different way to do another algo and broke D3, and recovery it, and broke and recover agian, many time.... autotune is not so good, bro. trust me =) timings and diff mask is roped. do better settings it's soo many hardly.

(set freq, check 10! minutes, restart, check again after 10 min. lower VCC, check after 10 min. recheck! twice! after prev changing, e.t.c.. it's safe.. all other if scam. sorry, bro)

blissz

sr. member

Activity: 336

Merit: 258

Quote from: ?? on ??

hi @blissz,

do you know who is this guy "koffee.1" after 24 hours, with firmware v1.11 the D3 worker changed to that guy ?
my D3 is rented !

I have no clue really...

blissz

sr. member

Activity: 336

Merit: 258

Quote from: martyshmoo on December 15, 2017, 01:56:32 AM

Quote from: Knightslugger on December 14, 2017, 09:50:34 PM

after you set autotune, are you guys rebooting or just letting it be after clicking Save&Apply?

I am trying autotune on 14Volts now for a good daytime setting.

It never really mines though...

All shares rejected but 2.

I found 11 Blocks for you though?

Man this version not cool yet.

My Miner never actually mines!

What to do!???

Patient one.

M

Sorry this beta version is definitely not yet ready for that as it starts at a way too low frequency which will mess things up. I am working on a next beta version that should improve the things I've seen. Can you PM your kernel log? Thanks

martyshmoo

newbie

Activity: 56

Merit: 0

Quote from: Knightslugger on December 14, 2017, 09:50:34 PM

after you set autotune, are you guys rebooting or just letting it be after clicking Save&Apply?

I am trying autotune on 14Volts now for a good daytime setting.

It never really mines though...

All shares rejected but 2.

I found 11 Blocks for you though?

Man this version not cool yet.

My Miner never actually mines!

What to do!???

Patient one.

M

Knightslugger

newbie

Activity: 19

Merit: 0

after you set autotune, are you guys rebooting or just letting it be after clicking Save&Apply?

david916

newbie

Activity: 22

Merit: 0

Quote from: samshanna on December 14, 2017, 03:46:29 PM

Blissz from what I am seeing I can put each miner on autotune and allow it to determine which card can take more. I already know all my rigs are good at minimum 450 and 7 or 8. Mostly 456. Once it goes thru the process I can then go back in and adjust each card to either the new higher frequency or revert back to the old stable settings. On the first try the autotune actually took one of my cards and lowered it way lower than was actually stable so I went back in after it was finished and changed it back to the higher setting. Make sense?

did you send the kernel log ? I hope everyone opining also sent the log like the dev asked.

samshanna

newbie

Activity: 15

Merit: 0

Blissz from what I am seeing I can put each miner on autotune and allow it to determine which card can take more. I already know all my rigs are good at minimum 450 and 7 or 8. Mostly 456. Once it goes thru the process I can then go back in and adjust each card to either the new higher frequency or revert back to the old stable settings. On the first try the autotune actually took one of my cards and lowered it way lower than was actually stable so I went back in after it was finished and changed it back to the higher setting. Make sense?

blissz

sr. member

Activity: 336

Merit: 258

Quote from: wkhash on December 14, 2017, 12:39:22 PM

I noticed it slowly pulling them back down to previous known good lower frequencies but those other freq were not stable either. Basically one of my chains is stable at 375. It tuned it up to 475 then spent forever slowly rolling it back while it had a very large number of errors and continual asic failures being thrown.

Made me uncomfortable to watch it fail so often and only slowly be pulled back.

ok thanks for the input

wkhash

newbie

Activity: 6

Merit: 0

I noticed it slowly pulling them back down to previous known good lower frequencies but those other freq were not stable either. Basically one of my chains is stable at 375. It tuned it up to 475 then spent forever slowly rolling it back while it had a very large number of errors and continual asic failures being thrown.

Made me uncomfortable to watch it fail so often and only slowly be pulled back.

blissz

sr. member

Activity: 336

Merit: 258

Quote from: wkhash on December 14, 2017, 12:19:00 PM

Poor performance on auto tune. Creates a mess of my machine heh. Once it finds "stable" settings it is still very unstable. I don't think the system waits long enough for each test to perform fully. Looks like it takes a full minute just for the chain to get up to the new set speed before the errors can start rolling in. Also even at stable settings I adjusted to manually the interface would report "x" on several random ASIC chains after a short while. Rolled back to v1.12.

Messaged you the logs blissz

Thanks for the logs! Looking at it I can conclude it is a little too aggressive maybe but you didn't wait for the second part of the auto tuning long enough. (where it lowers the frequencies). I have ideas to speed up the second part, as it's not really clear now. Maybe I can highlight the UI as well, so you can see it's still busy.

wkhash

newbie

Activity: 6

Merit: 0

Poor performance on auto tune. Creates a mess of my machine heh. Once it finds "stable" settings it is still very unstable. I don't think the system waits long enough for each test to perform fully. Looks like it takes a full minute just for the chain to get up to the new set speed before the errors can start rolling in. Also even at stable settings I adjusted to manually the interface would report "x" on several random ASIC chains after a short while. Rolled back to v1.12.

Messaged you the logs blissz

blissz

sr. member

Activity: 336

Merit: 258

Quote from: mkmfins on December 14, 2017, 07:04:47 AM

...

And now, what should I do, Blissz?

You definitely didn't win the lottery with your boards... Sad

they perform really bad (all of them). I am not sure if it can be a control board problem. Try swapping the bad chain cable and position with another one would be a good test

lashatatu

full member

Activity: 155

Merit: 100

Quote from: iamqw on December 14, 2017, 08:43:25 AM

is your firmware reversible or not?
I mean it can be rolled back to original bitmain version?

it is, check first post

iamqw

member

Activity: 130

Merit: 10

is your firmware reversible or not?
I mean it can be rolled back to original bitmain version?

blissz

sr. member

Activity: 336

Merit: 258

Quote from: iamqw on December 14, 2017, 08:22:39 AM

what version is that?
i tried your 1.12 and gives HW every minute or so, at lowest voltage and 400 freq.

This beta can automatically find the best frequency for the voltage you selected (see how to setup in the screen shot)

Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 31. (Read 125911 times)