ANTMINER S3+ Discussion and Support Thread - page 15.

Nite

newbie

Activity: 51

Merit: 0

Quote from: pinhead666 on January 24, 2016, 05:08:26 AM

Quote from: Nite on January 24, 2016, 04:48:49 AM

is thier any new pools I am suppose to switch to and get payments faster? cause all of a sudden my S3+ now takes 5 or 6 days to get 0.01 BTC instead of 2 days like before

was thier a big spike in bitcoin difficulty or am I just on a bad pool now? I'm using bitcoin.cz

Diff has gone up and S3 is not very effective. If you don't have very cheap electricity it's not profitable anymore. Changing pool won't help this.

Yea I was afraid of this Sad

I can't afford a 1TH miner, and my S3 only makes $25 a month now

pinhead666

sr. member

Activity: 265

Merit: 250

Quote from: Nite on January 24, 2016, 04:48:49 AM

is thier any new pools I am suppose to switch to and get payments faster? cause all of a sudden my S3+ now takes 5 or 6 days to get 0.01 BTC instead of 2 days like before

was thier a big spike in bitcoin difficulty or am I just on a bad pool now? I'm using bitcoin.cz

Diff has gone up and S3 is not very effective. If you don't have very cheap electricity it's not profitable anymore. Changing pool won't help this.

Nite

newbie

Activity: 51

Merit: 0

is thier any new pools I am suppose to switch to and get payments faster? cause all of a sudden my S3+ now takes 5 or 6 days to get 0.01 BTC instead of 2 days like before

was thier a big spike in bitcoin difficulty or am I just on a bad pool now? I'm using bitcoin.cz

caffeine93

newbie

Activity: 41

Merit: 0

A friend of mine has a problem with his Antminer S3+, apparently, one of his fans died. After a few weeks, he noticed some "X" on ASIC Status of his first board, then the next day all of his first board was full of "X" followed by the second board getting all "X". Now, I'm not sure exactly is there any overheating protection in the device or how it works.
So, do you think the board actually got completely fried and dead, or it is that the "overheating protection" jumps in and turns off the chips because the device can't be cooled properly with only one fan?

Would be very thankful for any info Grin

gt_addict

hero member

Activity: 2534

Merit: 623

Thanks Mike. Looks like I'll be upgrading it now then

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: gt_addict on January 13, 2016, 07:43:56 AM

Cheers Kano. I'll get it up and running then take a look at updating it. I'm not massively compentent doing in depth programming stuff. But I'll search the forum for the necessary information and see what I can do.

All the info you need is on the webpage I linked above, it's a simple process if you use something like cygwin to ssh into the machine.

Here's a cap of Kano's status screen from my S3+:

gt_addict

hero member

Activity: 2534

Merit: 623

Cheers Kano. I'll get it up and running then take a look at updating it. I'm not massively compentent doing in depth programming stuff. But I'll search the forum for the necessary information and see what I can do.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

If you mean my update?
My update has a few obvious changes on the web:
1) The Ant image in the top left also has a tiny "Kano" = かの in the image
2) The web page titles have "Ant Miner/K" (i.e. the added /K)
3) The stats page includes "G/HS(Paid)" with the hash rate statistics

gt_addict

hero member

Activity: 2534

Merit: 623

I'm not sure what version it's got at the moment. Still waiting for it to arrive. Have you got a screenshot (or do you know where one is on the forum) of the new look of the tables? I'm searched but it's hard to find a definitive answer in the 500+ pages in this thread.

Cheers.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: gt_addict on January 12, 2016, 03:09:29 PM

The only things that im unsure of at the moment is what all the various stats are on the screen shots ive seen throughout the forum (Diff#1, getworks, local work etc etc)?

Well the first thing you should do is update the cgminer with Kano's latest update, it removes all the unnecessary fields and adds a few useful ones. Plus it reduces cpu load dramatically and makes your S3 more efficient: https://github.com/kanoi/cgminer-binaries/tree/master/AntS3

gt_addict

hero member

Activity: 2534

Merit: 623

Thanks Rich

RichBC

hero member

Activity: 588

Merit: 500

Quote from: gt_addict on January 12, 2016, 03:09:29 PM

hi,
Also with the pool options, does anyone know how long it stays on the "second option" pool before connecting back to the priority pool? Does it stay there or periodically trys to connect?

I constantly looks at the Pools and as soon as the Primary comes back online it will switch.

Rich

gt_addict

hero member

Activity: 2534

Merit: 623

hi,

Im new to the world of mining and have recently bought an S3 as a starter. I haven't got it up and running yet but wil do when I have time. The only things that im unsure of at the moment is what all the various stats are on the screen shots ive seen throughout the forum (Diff#1, getworks, local work etc etc)? Also with the pool options, does anyone know how long it stays on the "second option" pool before connecting back to the priority pool? Does it stay there or periodically trys to connect?

Can someone enlighten a noob like me Grin

?

Cheers.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: vanga83 on October 10, 2015, 04:24:12 PM

I'm new to this and recently picked up an S3+. From what I've been reading, the server power supply from here http://www.ebay.com/itm/251982322928?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT looks sufficient to power one Antminer. Just wanted to double check with you guys if it would be a good choice. Thanks.

did you buy it?

if you did how would you turn it on?

RichBC

hero member

Activity: 588

Merit: 500

Quote from: VirosaGITS on December 21, 2015, 12:04:01 AM

Quote from: Rusalka68 on December 20, 2015, 11:26:27 PM

Ok, here's one for the group. Has anyone run into issues with the S3+ interfering with over the air TV reception (channels 11 thru 13)?

Wife just made me put a timer on the units so that she can watch the news @ night.

Umm, thats weird, you could probably disable the Wifi, but its so weak, it should not affect anything anyways and if they're not setup, they should not broadcast anyways. Are you using S3 over Wifi?

Then i guess anything could interefere with the weak air TV. Maybe get her real TV?

There are some High Frequency Square waves in the Miners, not entirely surprising that there is some interference? Do we know if the miners are tested for or comply with any EMC regulations? Quite often testing for & passing these regulations takes some time, would not surprise me if they have not even been tested?

Rich

clarkjhaley13

member

Activity: 110

Merit: 10

Quote from: Rusalka68 on December 20, 2015, 11:26:27 PM

Ok, here's one for the group. Has anyone run into issues with the S3+ interfering with over the air TV reception (channels 11 thru 13)?

Wife just made me put a timer on the units so that she can watch the news @ night.

My experience is it is the psu's that create the interferance. My neighbor only had over the air tv and mine destroyrf his signal. I cured it by simply putting a dome of aluminum foil over my stuff. Leaving air flow open of course.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: Rusalka68 on December 20, 2015, 11:26:27 PM

Ok, here's one for the group. Has anyone run into issues with the S3+ interfering with over the air TV reception (channels 11 thru 13)?

Wife just made me put a timer on the units so that she can watch the news @ night.

Umm, thats weird, you could probably disable the Wifi, but its so weak, it should not affect anything anyways and if they're not setup, they should not broadcast anyways. Are you using S3 over Wifi?

Then i guess anything could interefere with the weak air TV. Maybe get her real TV?

Rusalka68

newbie

Activity: 9

Merit: 0

Ok, here's one for the group. Has anyone run into issues with the S3+ interfering with over the air TV reception (channels 11 thru 13)?

Wife just made me put a timer on the units so that she can watch the news @ night.

Real-Duke

legendary

Activity: 3486

Merit: 2287

Wheel of Whales 🐳

Corsair CX750M will do

ganjasmokingg

member

Activity: 255

Merit: 10

Hello everybody , i am searching for an PSU wich can power an antminer S1 and s3 , or do i need to go for seperate PSU;s ? I hope someone here can give me some answers ! tnx in advance ! I am only familliair with gpu scrypt mining and x11 etc...

Topic: ANTMINER S3+ Discussion and Support Thread - page 15. (Read 710231 times)