ANTMINER S3+ Discussion and Support Thread - page 154.

pekatete

hero member

Activity: 518

Merit: 500

Quote from: Tupsu on October 08, 2014, 07:58:17 AM

Quote from: BITMAIN on October 08, 2014, 06:00:25 AM

AntMiner S3+ B10 sales open, shipping within 48 hours after full payment.

Shipping:
2xS3+ 0.784 BTC
3xS3+ 1.099 BTC
4xS3+ 1.44 BTC
5xS3+ 1.778 BTC
6xS3+ 2.181 BTC

Whether it is a penalty for that that I live in the European Union?

Where in the EU? I get 2xS3+ UPS BTC 0.44 DHL BTC 0.69 shipping to UK for batch 10.

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: BITMAIN on October 08, 2014, 06:00:25 AM

AntMiner S3+ B10 sales open, shipping within 48 hours after full payment.

Shipping:
2xS3+ 0.784 BTC
3xS3+ 1.099 BTC
4xS3+ 1.44 BTC
5xS3+ 1.778 BTC
6xS3+ 2.181 BTC

Whether it is a penalty for that that I live in the European Union?

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: heldertb on October 08, 2014, 06:01:47 AM

Sorry if this question has already been asked.
But is there a way to completely control the miner and see the stats with only using ssh?
I'm placing the miners somewhere I won't be able to reach them in a short notice. But SSH is possible.
So what would the commands be to check status, change pools, update firmware, etc.?

Yes it possible if you know the basics of file editing in linux via ssh.
CGminer stats and parameter editing(pool change and others) can be done via the same.
Just go for some linux ssh command guide and also go through the cgminer help file everything is there.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: BITMAIN on October 08, 2014, 06:00:25 AM

AntMiner S3+ B10 sales open, shipping within 48 hours after full payment.

Too expensive. You'll have to do better.

M

heldertb

full member

Activity: 242

Merit: 100

Blockchain-based Financial Ecosystem

Quote from: BITMAIN on October 08, 2014, 06:28:29 AM

Quote from: heldertb on October 08, 2014, 06:01:47 AM

Sorry if this question has already been asked.
But is there a way to completely control the miner and see the stats with only using ssh?
I'm placing the miners somewhere I won't be able to reach them in a short notice. But SSH is possible.
So what would the commands be to check status, change pools, update firmware, etc.?

Hi,
SSH is possible to meet your above requirements. We are asking for commands from engineers, reply you tomorrow morning.
We would recommend you to visit miner via webGUI, which is much more convenient than SSH.

Thank you very much!
I will try to make it work via webGUI too, but SSH seems easier atm

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Quote from: cloh76 on October 08, 2014, 06:47:32 AM

0.276 BTC shipping for 6 of them

To where & who with?

cloh76

sr. member

Activity: 318

Merit: 250

Anyone use the umisoo.com hosting service for their Antminers? What is the general service fee per month? Any feedback on them?

cloh76

sr. member

Activity: 318

Merit: 250

0.276 BTC shipping for 6 of them

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

Quote from: heldertb on October 08, 2014, 06:01:47 AM

Sorry if this question has already been asked.
But is there a way to completely control the miner and see the stats with only using ssh?
I'm placing the miners somewhere I won't be able to reach them in a short notice. But SSH is possible.
So what would the commands be to check status, change pools, update firmware, etc.?

Hi,
SSH is possible to meet your above requirements. We are asking for commands from engineers, reply you tomorrow morning.
We would recommend you to visit miner via webGUI, which is much more convenient than SSH.

pekatete

hero member

Activity: 518

Merit: 500

Quote from: PatMan on October 08, 2014, 06:16:06 AM

Shipping = BTC0.687 for 2! Shocked

What happened to the shipping included?

That's more than the cost of one S3. Plus import duty. Sorry, order cancelled.

Hmmm! Seems high, BTC 0.44 for UPS and BTC 0.69 for DHL.
Is this the shape of things to come?

EDIT: - thats gonna spice up the resale value of the S3 on fleabay!

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

Shipping = BTC0.687 for 2! Shocked

What happened to the shipping included?

That's more than the cost of one S3. Plus import duty. Sorry, order cancelled.

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

Quote from: pekatete on October 08, 2014, 06:02:55 AM

Quote from: BITMAIN on October 08, 2014, 06:00:25 AM

AntMiner S3+ B10 sales open, shipping with 48 hours after full payment.

Thanks BITMAIN, now about the S1 Upgrade Kit ... when is that opening and shipping?

S1 upgrade kit is out of stock, we have no plan to produce next batch now

pekatete

hero member

Activity: 518

Merit: 500

Quote from: BITMAIN on October 08, 2014, 06:00:25 AM

AntMiner S3+ B10 sales open, shipping with 48 hours after full payment.

Thanks BITMAIN, now about the S1 Upgrade Kit ... when is that opening and shipping?

heldertb

full member

Activity: 242

Merit: 100

Blockchain-based Financial Ecosystem

Sorry if this question has already been asked.
But is there a way to completely control the miner and see the stats with only using ssh?
I'm placing the miners somewhere I won't be able to reach them in a short notice. But SSH is possible.
So what would the commands be to check status, change pools, update firmware, etc.?

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

AntMiner S3+ B10 sales open, shipping within 48 hours after full payment.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Develop on October 07, 2014, 11:51:12 PM

Thanks i will give that a shot, would you by chance be able to provide me with the switches i need to enter in order to get it to work half decent with S3's? and nicehash server. I ran the exe with the -help switch however I don't really understand it well enough. I will research it all but it seams to be connecting to slush's pool by default and I prefer a steady payout :/ Any Help will be greatly appreciated.

This is what I used for Eligius:

-o stratum.mining.eligius.st -p 3334 -sp 3333 -gp 8330 -cu -rt -nm

that's port 3333 for the pool, and it listens on 3334. Point your workers to the address the proxy is running on, using port 3334.

M

Develop

full member

Activity: 129

Merit: 100

Thanks i will give that a shot, would you by chance be able to provide me with the switches i need to enter in order to get it to work half decent with S3's? and nicehash server. I ran the exe with the -help switch however I don't really understand it well enough. I will research it all but it seams to be connecting to slush's pool by default and I prefer a steady payout :/ Any Help will be greatly appreciated.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Develop on October 07, 2014, 08:24:14 PM

IS there a way to setup a proxy sever on a PC so that I can point all my S3's at the proxy and then direct the proxy to nicehash? I tried stratum server but i cannot get the s3's to start hashing :/ however i have an old S1 and it works just fine on the stratum proxy server.. is there another proxy program I could be using for both the S3's and S1. My goal is to be able to only have to change the proxy server pool address rather then have to change the address in each and every antminer everytime I want to change pools :/ Please advise.

Slush's stratum proxy should work fine. You may have to tweak your pool addresses in your S3s.. maybe use stratum+tcp:// instead of http://

M

Develop

full member

Activity: 129

Merit: 100

IS there a way to setup a proxy sever on a PC so that I can point all my S3's at the proxy and then direct the proxy to nicehash? I tried stratum server but i cannot get the s3's to start hashing :/ however i have an old S1 and it works just fine on the stratum proxy server.. is there another proxy program I could be using for both the S3's and S1. My goal is to be able to only have to change the proxy server pool address rather then have to change the address in each and every antminer everytime I want to change pools :/ Please advise.

cloh76

sr. member

Activity: 318

Merit: 250

Quote from: Moria843 on October 07, 2014, 12:28:48 PM

Quote from: cloh76 on October 07, 2014, 11:55:00 AM

Quote from: bspurloc on September 30, 2014, 11:16:24 AM

Quote from: tl121 on September 30, 2014, 10:47:13 AM

Quote from: IYFTech on September 30, 2014, 08:50:23 AM

Now they have finally upload the newer cgminer code that fixes the security holes (6 weeks late), but they don't give users any information about how to apply the update!! Does that mean their customers have to wait another 6 weeks to get an answer?

This is a simple and quick fix. The recipe has been posted many times in the forums.

1. SSH into the S3 and login
2. Issue the following commands sequentially.
a) cd /usr/bin
b) mv cgminer cgminer.bak
c) wget http://ck.kolivas.org/apps/cgminer/antminer/s3/4.6.0-140908/cgminer
d) chmod +x cgminer
3. Reboot

replace reboot with
/etc/init.d/cgminer restart
or
/etc/init.d/cgminer stop
/etc/init.d/cgminer start

no need to reboot the device! OMG! A block could be found in that time!!!

After the update i wont need to set everything up again right? Also wanted to make sure my S3+ will retain all of it's settings?

You will not. I just did it a few days ago to 2 S3+. All settings stayed the same except it changed http: to stratum+tcp in the miner status view. But they still go to the same pools.

cool. Thanks

Topic: ANTMINER S3+ Discussion and Support Thread - page 154. (Read 710164 times)