Topic: ANTMINER S3+ Discussion and Support Thread - page 454. (Read 710164 times)
After 16 hours up with no OC I am getting an average of 441.96 on one and 441.2 on the other. .001% and .0009% HW errors.
Bitmain just update their site to include a "News" section, although it's so far an empty page. They may be preparing to shoot us an update.
Please update previous post and add you stats
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 32
Batch 3 only
Shipped 0
Waiting 7
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 32
Batch 3 only
Shipped 0
Waiting 7
Batch 1
Shipped 0
Waiting 4
Batch 1:
Ordered on
Order ID: 00120140630144612380aNwRoT9x06DA
Date: 2014-06-30 14:46:13
Total: 18 BTC
Payment method: Bitcoin Payment
TOday:
Shipped : 0
Waiting: 24
I am paying for first batch, but today is the 18 and they have not shipped. They should not charge me .75 btc when my miners were not delivered as a first batch
Batch 1: The shipping will be finished in 14th and 17th.
Batch 2: It will be shipping out between 18th and 19th.
Batch 3: It will be shipping out between 19th and 22nd.
batch 2 and 3 are not shipping yet. Ordered on
Order ID: 00120140630144612380aNwRoT9x06DA
Date: 2014-06-30 14:46:13
Total: 18 BTC
Payment method: Bitcoin Payment
TOday:
Shipped : 0
Waiting: 24
I am paying for first batch, but today is the 18 and they have not shipped. They should not charge me .75 btc when my miners were not delivered as a first batch
Batch 1: The shipping will be finished in 14th and 17th.
Batch 2: It will be shipping out between 18th and 19th.
Batch 3: It will be shipping out between 19th and 22nd.
Batch 2 only
Shipped: 0
waiting: 2
Shipped: 0
waiting: 2
Please update previous post and add you stats
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 32
Batch 3 only
Shipped 0
Waiting 7
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 32
Batch 3 only
Shipped 0
Waiting 7
So Bitmain is completely sold out of S2 and S3. They need to expand!
Batch 1:
Ordered on
Order ID: 00125160730144612380aNwRoT9x06DA
Date: 2014-06-30 14:46:13
Total: 18 BTC
Payment method: Bitcoin Payment
TOday:
Shipped : 0
Waiting: 24
I am paying for first batch, but today is the 18 and they have not shipped. They should not charge me .75 btc when my miners were not delivered as a first batch
Batch 1: The shipping will be finished in 14th and 17th.
Batch 2: It will be shipping out between 18th and 19th.
Batch 3: It will be shipping out between 19th and 22nd.
Ordered on
Order ID: 00125160730144612380aNwRoT9x06DA
Date: 2014-06-30 14:46:13
Total: 18 BTC
Payment method: Bitcoin Payment
TOday:
Shipped : 0
Waiting: 24
I am paying for first batch, but today is the 18 and they have not shipped. They should not charge me .75 btc when my miners were not delivered as a first batch
Batch 1: The shipping will be finished in 14th and 17th.
Batch 2: It will be shipping out between 18th and 19th.
Batch 3: It will be shipping out between 19th and 22nd.
Hi,
For those people who have their Antminer S3's up and running how have you connected your power cables have you will attached cables to all four points or just one on each blade?
Thanks,
A
For those people who have their Antminer S3's up and running how have you connected your power cables have you will attached cables to all four points or just one on each blade?
Thanks,
A
No OC just 2 one to each side.
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think?
Does anyone have any ideas how I could set up the miners remotely?
Thanks
Does anyone have any ideas how I could set up the miners remotely?
Thanks
If you put two NIC's in your PC you can preconfigure one to talk to the miner (with crossover cable) and leave the other one to connect to your network. Then all she has to do initially is power the miner and plug it into the crossover cable. You can then remote in and configure it. If you set the IP as the last bit of configuration, she can then just change the ethernet cable to put it on your main network.
Unfortunately I don't have another network card
Does your computer have wifi and a hardwired NIC you can do the same thing suggested here?
Nar I use one of my GPU rigs for a computer and that is wired directly into the router (well through a switch first)
I have set the missus up with printed screenshots etc of what she needs to do. Find out Monday how we go
Miners arrived early
yay. And guess what, the missus knew exactly what to do just as I had told her. Good girl.Am having an issue though. Im only hashing at 412GH with one and 420GH with the other. Really hope they can be overclocked safely longer term
Hi,
For those people who have their Antminer S3's up and running how have you connected your power cables have you will attached cables to all four points or just one on each blade?
Thanks,
A
For those people who have their Antminer S3's up and running how have you connected your power cables have you will attached cables to all four points or just one on each blade?
Thanks,
A
General questions about the S3 now that mine have been hashing for a few hours...
1) Why in the name of all that's holy does it randomly beep? Every now and then it just goes "BEEEEEP!" It's not like it's rebooting... it just decides to let everyone know, "Hey, I'm here! Pay attention to me!"
2) I know the "o" in the miner status means "OK" and that "x" means "error". What does "-" mean?
General comments:
1) At stock clocks it hashes almost exactly to spec on p2pool (my local node). Initially it was around 450GH/s, but after settling down and going for a few hours now, it's about 439GH/s.
2) Overclocking it has far less effect on p2pool than on another pool. For example, at 250, I get about 455GH/s on p2pool. I get 500GH/s elsewhere with the same settings.
The beep is internet connection lost or failed to get work. It will retry to get work or listen for the internet connection up to a point. If it keeps hashing then its doing what its supposed too.1) Why in the name of all that's holy does it randomly beep? Every now and then it just goes "BEEEEEP!" It's not like it's rebooting... it just decides to let everyone know, "Hey, I'm here! Pay attention to me!"
2) I know the "o" in the miner status means "OK" and that "x" means "error". What does "-" mean?
General comments:
1) At stock clocks it hashes almost exactly to spec on p2pool (my local node). Initially it was around 450GH/s, but after settling down and going for a few hours now, it's about 439GH/s.
2) Overclocking it has far less effect on p2pool than on another pool. For example, at 250, I get about 455GH/s on p2pool. I get 500GH/s elsewhere with the same settings.
I think the beeping has to do with hw error's.
Even with option beeper ringing = false,
it still beeps every time i get a hardware error.
set it to link on my wan, lan and even wwan its getting packets from the internet but still no mining
Did you check that your Antminer IP is now within the IP range supported by your router?It's unclear what do you mean by 'set it to link' - if it's like the S1 you don't need to 'link' the WAN with the LAN or the WWAN (I never touch the LAN or WWAN, and the S1 guides have some instructions that the LAN and WAN cannot be on the same IP segment).
Are you sure that you entered your pool information 100% correctly? (made a small typo in the rush to setup my first S1, it took a few minutes of stress to find the slight error and fix it).
Maybe you should reset it to factory defaults and start all over again.
Cheers
Yeah I think i will reset it all. Thanks!!
Any word on the refunds? Doesn't seem that hard.
Batch 1 Only
2 Shipped
0 Waiting.
Also this is set up like the S1 I assume?
Correct. They've added a few options, but setup is the same. If you've turned up an S1 you'll feel right at home. 2 Shipped
0 Waiting.
Also this is set up like the S1 I assume?
Please update previous post and add you stats
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 8
Batch 3 only
Shipped 0
Waiting 7
so I assume we are at :
Batch 1 only
Shipped 11
Waiting 8
Batch 3 only
Shipped 0
Waiting 7
set it to link on my wan, lan and even wwan its getting packets from the internet but still no mining
Did you check that your Antminer IP is now within the IP range supported by your router?It's unclear what do you mean by 'set it to link' - if it's like the S1 you don't need to 'link' the WAN with the LAN or the WWAN (I never touch the LAN or WWAN, and the S1 guides have some instructions that the LAN and WAN cannot be on the same IP segment).
Are you sure that you entered your pool information 100% correctly? (made a small typo in the rush to setup my first S1, it took a few minutes of stress to find the slight error and fix it).
Maybe you should reset it to factory defaults and start all over again.
Cheers
Batch 1 Only
2 Shipped
0 Waiting.
Also this is set up like the S1 I assume?
2 Shipped
0 Waiting.
Also this is set up like the S1 I assume?
Please update previous post and add you stats
so I assume we are at :
Batch 1 only
Shipped 9
Waiting 8
Batch 3 only
Shipped 0
Waiting 6
so I assume we are at :
Batch 1 only
Shipped 9
Waiting 8
Batch 3 only
Shipped 0
Waiting 6
Batch 1 only
Shipped 6
Waiting 0
Shipped 6
Waiting 0
Jump to: