Pages:
Author

Topic: ANTMINER S4 2TH/s, Batch 1 on Sale this week, shipping before Sept. Ends - page 27. (Read 33454 times)

sr. member
Activity: 266
Merit: 250
Anyone else thinks this device will use 3U ? or is just me? Maybe the PSU won't let Bitmain do the change. But how knows.
legendary
Activity: 1148
Merit: 1000
Difficulty sky-rocketing
Coin dropping like a stone
S3 roll out sucked
S4 will be over priced
Bitmain is mining with these RIGHT NOW

PASS.
legendary
Activity: 938
Merit: 1007
It'll have to be a quick sale then, it's the 17th and they're planning on shipping the 20st. With no verifiable details whatsoever atm.

Very curious.

I stand corrected, they want to start shipping before EOM.
hero member
Activity: 728
Merit: 500
It'll have to be a quick sale then, it's the 17th and they're planning on shipping the 20st. With no verifiable details whatsoever atm.

Very curious.

In the description it says on sale this week with a shipping date before the end of September which gives them a couple weeks.  Still a very short window with no details though Smiley
They need a little time to swap all the S2's in their farm with S4's then they will start shipping customers equipment once they have rode out another difficulty increment at increased hash rate  Tongue
hero member
Activity: 728
Merit: 500
You idiots should stop funding Chinese mining farm.... seriously you think you can beat them?
For every S4 sold, it will fund 5x S4s for their farm.

What do you suggest as an alternative?
Stop buying mining gear and spend your money on something usefull.
sr. member
Activity: 457
Merit: 250
Hello Sir,

I am From India. I am looking to buy Bitcoin Miner .

If I Order it from you, Are you able to do shipping to maharashtra, India.

If its possible, then I am going to order it .

Plz pm me with more details about shipping to India.

+1

This dude is awesome. I like the way he thinks.

On a side note. kinda looks 3u sizable doesnt it? - if the image is sized properly.. Would be nice to fit 2ths in 3u.. I wouldnt mind Smiley
legendary
Activity: 1722
Merit: 1014
Hello Sir,

I am From India. I am looking to buy Bitcoin Miner .

If I Order it from you, Are you able to do shipping to maharashtra, India.

If its possible, then I am going to order it .

Plz pm me with more details about shipping to India.
sr. member
Activity: 318
Merit: 250
It'll have to be a quick sale then, it's the 17th and they're planning on shipping the 20st. With no verifiable details whatsoever atm.

Very curious.

In the description it says on sale this week with a shipping date before the end of September which gives them a couple weeks.  Still a very short window with no details though Smiley
full member
Activity: 121
Merit: 100
HodL tight, it's gonna get wild
You idiots should stop funding Chinese mining farm.... seriously you think you can beat them?
For every S4 sold, it will fund 5x S4s for their farm.

What do you suggest as an alternative?
legendary
Activity: 1036
Merit: 1000
Low wages in China is considered about 140 euro when the high is about 240 euro
Now 140 / 30 days I dont really know how many days they work but for calculation salary
per day is 4,5 euro.
So how many days a worker is needed to asseble a S3
I guess the boards are assabled by computers so its actually the cost of hardware
also produced in china so i think its less than 150 eur that someone mentioned
for mass production maybe the half of it.
legendary
Activity: 938
Merit: 1007
It'll have to be a quick sale then, it's the 17th and they're planning on shipping the 20st. With no verifiable details whatsoever atm.

Very curious.
hero member
Activity: 714
Merit: 500
everything in china is so cheap, i bet their costs per S3 unit are not more than 150 $ (which I still belive is much lower in reality, like 100 $ per unit or so)
they pay employees for a full day of work less than 5 $
Chip costs are the same all over the world, and bulk pcb orders are also quite the same price.

I stand by my estimation concerning internal costs of 0.4$/GH for S4s, likely a little less for S3s.

This can be calculated when taking into account standard wafer cost, packaging cost, pcb cost etc. (and includes only the production of the unit, no shipping)

It also doesn´t include NRE and other engineering expenses (28nm chip ~$2-5M NRE).

I admit that there might be room for error, but it is most likely less less than +/-20%.
legendary
Activity: 1120
Merit: 1001
everything in china is so cheap, i bet their costs per S3 unit are not more than 150 $ (which I still belive is much lower in reality, like 100 $ per unit or so)
they pay employees for a full day of work less than 5 $
hero member
Activity: 770
Merit: 509

Where did you get the info that S3 production cost is 0.4$/GH? Hopefully the production cost is cheaper for S4.
It might be a little lower as the chips are overclocked and no PSU is included, but not by much.

It is accurate for S4 though (more chips, included PSU...).

But where did you get the $0.4/gh from?

Quote
Each unit also includes shipping costs which aren´t cheap at all, so the profit for bitmain is very thin.

I have to disagree. Shipping from china to USA is only ~$5/kg.
hero member
Activity: 714
Merit: 500

Where did you get the info that S3 production cost is 0.4$/GH? Hopefully the production cost is cheaper for S4.
It might be a little lower as the chips are overclocked and no PSU is included, but not by much.

It is accurate for S4 though (more chips, included PSU...).

People often don´t realize that there is a real limit to the amount a vendor can discount its hardware, and that is production cost.
With these low bitcoin prices, high difficulty rates etc. the profit margins on the hardware side aren´t what they used to be.

Chip cost, cost of assembly, pcb and PSU cost are all factors that cannot really be influenced by the vendor (other than bulk discounts, these do not apply to chips though)
A good chip design can decrease the cost per GH for chips, but once everyone is on 28nm, there is no big difference between vendors.
sr. member
Activity: 434
Merit: 250
You idiots should stop funding Chinese mining farm.... seriously you think you can beat them?

For every S4 sold, it will fund 5x S4s for their farm.

That is highly unlikely, as production cost for S3s is around 0.4$/GH....

Each unit also includes shipping costs which aren´t cheap at all, so the profit for bitmain is very thin.


On top of this, Chinese farms aren´t really as competitive as you might think. Chinese electricity prices, while heavily subsidized, are still quite high in comparison to WA state 0.03$/kWh power rates.

Where did you get the info that S3 production cost is 0.4$/GH? Hopefully the production cost is cheaper for S4.
sr. member
Activity: 318
Merit: 250
How is the noise level on these?   Was the S2 relatively quiet like the S1/S3?   Just want to know what I should expect from these S4s.  If these are noisier, I will probably stick with the S3s.
hero member
Activity: 714
Merit: 500
You idiots should stop funding Chinese mining farm.... seriously you think you can beat them?

For every S4 sold, it will fund 5x S4s for their farm.

That is highly unlikely, as production cost for S3s is around 0.4$/GH....

Each unit also includes shipping costs which aren´t cheap at all, so the profit for bitmain is very thin.


On top of this, Chinese farms aren´t really as competitive as you might think. Chinese electricity prices, while heavily subsidized, are still quite high in comparison to WA state 0.03$/kWh power rates.
hero member
Activity: 658
Merit: 500
You idiots should stop funding Chinese mining farm.... seriously you think you can beat them?

For every S4 sold, it will fund 5x S4s for their farm.
legendary
Activity: 1258
Merit: 1027
So many questions, so little information....

All we know is stated 2 TH/s.

Power consumption at the wall?

Watts per GH?

Internal manufacturer supplied or external user supplied power supply?

Price?

Bulk discount threshold?

Fill us in please....
Pages:
Jump to: