Topic: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH &amp; 0.51W/GH - page 86. (Read 451266 times)

Quote from: toptekk on May 07, 2015, 11:30:07 PM

I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

the wires were perfect length..
the fan i got use a reverse pwm signal. so instead of 0v full speed, and 5v stop, its 0v stop and 5v full speed..

im not sure if the fans he got are the same.

this was the fan i got
http://www.amazon.com/gp/product/B00L5XEKOS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Awesome! I do have 2 boards to adapt those fans, clusters of 3, I got two because I intended on getting more C1's and upgrade fans/rad.
Day I went to order C1... Sold Out! lol
So I overspent for an S5 but that's fine, better one of those than 5x S1's. Cool

OR

http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

That's brilliant!! Been looking for this for ages.... well... in bitcoin mining this means a few weeks. Grin

Yet again, amazon ain't normally my place to buy computer parts.

Thanks, both of ya's, now I have a plan of attack but it's still kinda cool right now, hottest temperature in the mine is only 35c...
Besides, I'll be putting in an air blower next month but adding a second fan should increase resale value... plus in case the blower fails.

I'm more worried about temperature than I am with the noise.
My Miner's white noise help me sleep at night.

alienesb

hero member

Activity: 868

Merit: 1000

Quote from: toptekk on May 07, 2015, 11:30:07 PM

OR

http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

Use the stock fan and just put this on it:

http://www.amazon.com/Zalman-Fan-Speed-Controller-FANMATE-2/dp/B000292DO0/ref=sr_1_2?s=electronics&ie=UTF8&qid=1431083011&sr=1-2&keywords=fanmate

I have used this for several miners and it lets you adjust the speed/sound/temp ratio just fine. Also, tape two of these in a line and put it on top of your miner to quiet it down even further. Make sure it extends past the fans a little bit:

http://www.amazon.com/gp/product/B008Y387B4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

toptekk

member

Activity: 112

Merit: 10

Quote from: thedreamer on May 07, 2015, 09:12:14 PM

I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

OR

http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: marvykkio on May 07, 2015, 03:22:42 AM

I ordered four of these fans, what do you think?

delta 120 mm 12 cm ventola pwm tfc1212de 252CFM

fabbricazione / marca
delta
modello / part number
TFC1212DE-SP07
dimensione / dimension
120 mm x 120 mm x 38 mm
tensione nominale
12 vdc
corrente nominale
4.0 amp
potenza nominale di ingresso
- watt
velocità della ventola
5500 numero di giri ( giri al minuto )
massimo flusso d'aria
252.8 cfm ( piedi cubi al minuto )
livello di rumore
66 db-a
pressione massima
35.88 mmh2o
tipo di cuscinetto
palla
terminazione
12 ? con 4 conduttori
connettore di alimentazione
4 pin
funzione / caratteristiche
controllo pwm / sensore di velocità ( put tach out )
rohs
rohs compliant

I have one. it's actually louder than the stock S5 fan. Cheesy

it is at full volume but not at 50% and at 50% it flows more air then the stock fan.

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Quote from: marvykkio on May 07, 2015, 03:22:42 AM

I ordered four of these fans, what do you think?

delta 120 mm 12 cm ventola pwm tfc1212de 252CFM

fabbricazione / marca
delta
modello / part number
TFC1212DE-SP07
dimensione / dimension
120 mm x 120 mm x 38 mm
tensione nominale
12 vdc
corrente nominale
4.0 amp
potenza nominale di ingresso
- watt
velocità della ventola
5500 numero di giri ( giri al minuto )
massimo flusso d'aria
252.8 cfm ( piedi cubi al minuto )
livello di rumore
66 db-a
pressione massima
35.88 mmh2o
tipo di cuscinetto
palla
terminazione
12 ? con 4 conduttori
connettore di alimentazione
4 pin
funzione / caratteristiche
controllo pwm / sensore di velocità ( put tach out )
rohs
rohs compliant

I have one. it's actually louder than the stock S5 fan. Cheesy

aarons6

legendary

Activity: 1736

Merit: 1006