Topic: ANTMINER S5+ is available to order, 7.722TH/S 0.445J/GH - page 21. (Read 40128 times)

I went with bitmaintech's new hashnest offering instead

I got 10th for 6.66 btc.

Frankly I rather have this unit but the wife would kill me.



The price is good 2375 usd  for 7.7 th

with shipping  to usa 2473.37   keeps under that 2500 barrier.  (thank you)



As for my  choice of 10th for 6.66 btc

bitmaintech has sold 10,514  1th contracts for PACMIC v3 in the last 20 hours

that is about 7000 btc in sales.

It would be interesting to see what turns out to be the better buy.

Ordered.

$2,475 shipped to US.

Ordered

2x S5+ with shipping to estonia
18.958 BTC

There we go! It is official now, cheers to that.

Reserved for FAQ

Bitmain is proud to introduce our newest iteration of AntMiner, the S5+. This model is comprised of three hashing modules, each of which is approximately the same form factor as the S5, with the addition of an extra hashing board located in the middle. The new design squeezes 144 BM1384 chips into the same area that the S5 fit only 60 chips into.

  

Specifications:

• Hash Rate: 7722 GH/s ±5%
• Power Consumption: 3436W (at the wall, with AC/DC 93% efficiency, 25℃ ambient temp)
• Power Efficiency: 0.445W/GH (at the wall, with AC/DC 93% efficiency, 25℃ ambient temp)
• Rated Voltage: 12V
• Chip Process: 28nm
• Chip quantity per unit: 432x BM1384
• Dimensions: 275 mm x 372 mm x 155 mm
• Cooling: 6x 12038 fan
• Operating Conditions: 0 °C to 40 °C
• Network Connection: Ethernet

The three modules are linked together and operated with one controller board located on the middle unit. Customers must buy the set of three modules as one unit; Bitmain is not selling the individual modules of the S5+.

In addition to the higher hashrate, the AntMiner S5+ also achieves a better power efficiency than the standard S5. At 0.445J/GH, the S5+ is approximately 13% more efficient than its predecessor.

Comparison

	AntMiner S4+	AntMiner S5	AntMiner S5+
Chip	204x BM1382	60x BM1384	432x BM1384
Hashrate	2570GH/s	1155GH/s	7722GH/s
Power Draw	1500W	590W	3436W
Power Efficiency	0.58J/GH	0.51J/GH	0.445J/GH
Dimensions(mm)	432*442*133	298*137*155	275*372*155
Weight(boxed)	14.4kg	3.5kg	11kg

A New Cooling Solution:
The S5+ uses an unpainted aluminum casing. It also does away with the larger heatsinks of previous models; instead each chip is fitted with its own small heatsink for greater heat dissipation.

Each of the three modules contains two 12038 axial fans, one on each end. Each fan runs at approximately 4,200 RPM.

Hash board with heat sinks attached.
 
Front view with fans attached

Front view (fans removed). Note the new heat sink configuration.

Rear view

Hash board, with no heat sinks attached.

Detail view of the control board.