When I extract the file(Antminer-V9-20180312-600M) that I downloaded from bitmain, it does not have a img file. How do I extract as a img file?
Hi. I downloaded the firmware update from bitmain and extracted it to my desktop with winzip. I then opened the antminer mining software, clicked upgrade and at the bottom of that page was the was an option to update firmware from the folder I had on the desktop. Took around 3 mins to update to latest firmware, and no need for the sd card. Hope this helps.
Topic: Antminer V9 4TH - page 3. (Read 20009 times)
Had mine arrive today, only tested one so far but Nicehash only works for a few mins then doesn't pick up anything and Slushpool gets around 45% rejected shares rate :S
Will test the others tomorrow
BTW yes I have updated the firmware to the latest version
Will test the others tomorrow
BTW yes I have updated the firmware to the latest version
i have this problem too. did you find a solution?
When I extract the file(Antminer-V9-20180312-600M) that I downloaded from bitmain, it does not have a img file. How do I extract as a img file?
I tried formatting my SD card then i copied the files from the link you posted onto this sd card. Is this the proper way to make the sd card readable for the miner?
If you formatted the SD card, normally just copying the files will not create a bootable disc. The software is based on an image and not an exe file. You'll need to do an internet search and find a program to burn the image to disc, in your case it will burn the image to the SD card. My comp came with an iso viewer that also burns images to disc, you may have something like it already installed on yours. I used it to burn an image to my old S-2 SD card and it worked perfectly. Sometimes just a right click on the image file will bring up a menu that will allow you to burn the image to disc. Hopefully your comp came with something too.
I'm sure you already know but for anyone that may not, they need to download an IP scanner to search their network for the miner during the first boot up or anytime the V-9 is set to DHCP. After finding the miner, sign in with username "root" and password "root" to set the network and static IP settings.
Chris B.
Moderator's note: This post was edited by frodocooper to remove nested quotes.
The reset button on the V9's I have dont do anything. I can hold them down for over a mintue and still no beep. I formatted an SD card with FAT32 and copied the firmware files bitmain posted for the V9 Miner onto the SD card. I then inserted the SD card into the miner and turned it on. The fans started spinning at max and now both the red and green led are staying on. Ethernet light is flashing but nothing is showing up on my router. Any ideads?
you may not have incorrectly configured the static IP address address i had a V9 the Controller went up after i tried to set the static IP address a few others in this post a few pages back had the same problem, i had to get the V9 replaced.
the two i have now work great on a static IP. it doesn't happen to everyone,I believe it's the same controller used on the S9 an T 9 .. I Know for sure it is not the same controller used on the L3+ AND D3 ...
Moderator's note: This post was edited by frodocooper to remove nested quotes.
I tried formatting my SD card then i copied the files from the link you posted onto this sd card. Is this the proper way to make the sd card readable for the miner?
Moderator's note: This post was edited by frodocooper to remove nested quotes.
The reset button on the V9's I have dont do anything. I can hold them down for over a mintue and still no beep. I formatted an SD card with FAT32 and copied the firmware files bitmain posted for the V9 Miner onto the SD card. I then inserted the SD card into the miner and turned it on. The fans started spinning at max and now both the red and green led are staying on. Ethernet light is flashing but nothing is showing up on my router. Any ideads?
Have you tried this:
https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
Moderator's note: This post was edited by frodocooper to remove nested quotes.
Can Someone please share the IMG file for the V9 firmware so i can flash it on my miner. I incorrectly configured the static IP address and now i cant log into the machine. I'm not sure what files to copy onto my SD card for the flash.
Did you try resetting the miner?
Thank you for the response.
The reset button on the V9's I have dont do anything. I can hold them down for over a mintue and still no beep. I formatted an SD card with FAT32 and copied the firmware files bitmain posted for the V9 Miner onto the SD card. I then inserted the SD card into the miner and turned it on. The fans started spinning at max and now both the red and green led are staying on. Ethernet light is flashing but nothing is showing up on my router. Any ideads?
Can Someone please share the IMG file for the V9 firmware so i can flash it on my miner. I incorrectly configured the static IP address and now i cant log into the machine. I'm not sure what files to copy onto my SD card for the flash.
Did you try resetting the miner?
Great news.
Is there anyway in updating the firmware when there is no access into the miner interface??
Could there be a way via using an SD card?
Is there anyway in updating the firmware when there is no access into the miner interface??
Could there be a way via using an SD card?
Yes, it's on the Bitmain website:
https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
-Dave
IT WORKS!! Managed to flash Firmware by loading the files onto SD card. Once loaded, found IP throught
the IP report button. Set to static again, this time no problems.
Mine on!
Can Someone please share the IMG file for the V9 firmware so i can flash it on my miner. I incorrectly configured the static IP address and now i cant log into the machine. I'm not sure what files to copy onto my SD card for the flash.
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Yea it does . it use CGminer as the soft ware miner .
Can you set the access control for the API, e.g. specify which IP can write and which can only read? I didn't see a section in the screenshots that shot a place to input that information.
Cheers.
hmm, seeing $199 with free shipping on ebay as I type this. Wish I could look into it for a half dozen of these or so, but I just purchased two s9s which have tapped me out for the time being.
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Yea it does . it use CGminer as the soft ware miner .
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Can you give me an easy way to test for what you want?
I don't have full access to them from where I am now, but if it's simple I can try to carve out sometime tomorrow or Tuesday.
-Dave
Cheers.
-Dave
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Can you give me an easy way to test for what you want?
I don't have full access to them from where I am now, but if it's simple I can try to carve out sometime tomorrow or Tuesday.
-Dave
Cheers.
Anyone else see an unusually high number of rejected shares?
About 2/3 rejected to accepted. 0 hardware errors
About 2/3 rejected to accepted. 0 hardware errors
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Can you give me an easy way to test for what you want?
I don't have full access to them from where I am now, but if it's simple I can try to carve out sometime tomorrow or Tuesday.
-Dave
I know this is a crazy question, but can anyone let me know if this device supports the cgminer API set like the S9 does?
Cheers.
Cheers.
Did some power consumption tests on the V9. Using OEM Bitmain APW 3 Psu.
~1370watts!!!!!!!!!!!!
~1370watts!!!!!!!!!!!!
Just as an FYI if you set the speed too low you might have a board drop out.
I was testing to see how far I could drop it. And to see if I could get the noise down to a tolerable level to keep one in my office for testing. Below 412 one of the board would go all xxxxxx after a little while.
Above that it's fine.
So there might be a bottom limit on some of these.
-Dave
I was testing to see how far I could drop it. And to see if I could get the noise down to a tolerable level to keep one in my office for testing. Below 412 one of the board would go all xxxxxx after a little while.
Above that it's fine.
So there might be a bottom limit on some of these.
-Dave
Jump to: