Unlocked my Batch 3 about 10 days ago.
Running steady at 700Mhz
Depending on the pool difficulty it ranges between 14.5k (high diff) and 17k (low diff)
Ran at 750Mhz for a full day, but the speed was noticeably lower (12-13ksol/s)
http://i65.tinypic.com/23ubgo1.jpg
Topic: Antminer Z9 mini overclocked - page 5. (Read 26129 times)
You are right bro. Time is coming!
I've been stupid to buy chinese again. But I vow that I will not be anymore prey of the communist Chinese.
They are and will be always my first enemy. I hate the communism capitalist of these people not able to create added value. Thinks about the salary of people that is building asics in factories. They are trying to build a new Roman Era with their modern slaves. But pay attention Chinese, in the Roman Empire we have built streets, aqueducts and a big army ready to fight anyone. Not to build obsolete miners. Also the Moore's Law, do you remember the famous 18 months in ICT? Well, with these new miners this law has been destroyed.
Pay attention chinese, or the Old Empire will destroy you.
Tell me what you smoke, I want to buy the same
Could you pls help me to figure out how to solve the problem on board no.2 ?
I have x on board 2, however, if i decreased the frequency the x will be removed.
https://i.postimg.cc/HWSGkKS8/20180918_224555.jpg
https://postimg.cc/xqbpssV9
I have x on board 2, however, if i decreased the frequency the x will be removed.
https://i.postimg.cc/HWSGkKS8/20180918_224555.jpg
https://postimg.cc/xqbpssV9
"Decrease frequency" is the only solution as of now.
Does board no 2 get enough power ? ? ?
Switch powerconnector with board 1 or 3 and see if problem moves to other board or goes away ? ? ?
If not, then decrease frequecy is only solution as of now!!!
I have tried to switch the power connector, but the problem still there.
Only decreasing the frequency, which cause losing hashrate, was the only solution i found.
Could you pls help me to figure out how to solve the problem on board no.2 ?
I have x on board 2, however, if i decreased the frequency the x will be removed.
I have x on board 2, however, if i decreased the frequency the x will be removed.
"Decrease frequency" is the only solution as of now.
Does board no 2 get enough power ? ? ?
Switch powerconnector with board 1 or 3 and see if problem moves to other board or goes away ? ? ?
If not, then decrease frequecy is only solution as of now!!!
what is diffrence b/w altcoin and bitcoin
you can try google but here you go
BTC is BTC altcoins are al all the other coins
what is diffrence b/w altcoin and bitcoin
Seen the last returns ready to turn off this great investment 
Damn China!!
Damn China!!
FYI: with those 2x Z9 from batch2, i§m not able to go over 600MHz, when i overclock more, they runs just about 1.5 KSol.,.. Asic status is oooo for al boards
Doesnt matter if i set 610, 630, 650 or more, looks the same
Something as:
Chain# ASIC# Frequency KSol/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1 4 666 1.62 0 33 41 oooo
2 4 666 1.27 0 33 41 oooo
3 4 666 1.39 0 35 44 oooo
Compared to 600 MHz:
Chain# ASIC# Frequency KSol/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1 4 600 4.30 0 50 64 oooo
2 4 600 4.09 0 46 60 oooo
3 4 600 4.62 0 49 61 oooo
Doesnt matter if i set 610, 630, 650 or more, looks the same
Something as:
Chain# ASIC# Frequency KSol/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1 4 666 1.62 0 33 41 oooo
2 4 666 1.27 0 33 41 oooo
3 4 666 1.39 0 35 44 oooo
Compared to 600 MHz:
Chain# ASIC# Frequency KSol/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1 4 600 4.30 0 50 64 oooo
2 4 600 4.09 0 46 60 oooo
3 4 600 4.62 0 49 61 oooo
Anyway reverse the fan will fall the warranty. So make it at your risk.
There is no sticker over the fan. No one will recognize, you had it reversed. But i just do not see the point of doing so .)
It seems that communications on Z9 is done through PIC16F1704, same as for L3+
https://bitcointalksearch.org/topic/the-inside-of-antminer-z9s-4534369
Did anyone try to change voltages similar to this ?
all details here
https://bitcointalksearch.org/topic/bitmain-l3-voltage-control-toolfree-3546316
https://bitcointalksearch.org/topic/the-inside-of-antminer-z9s-4534369
Did anyone try to change voltages similar to this ?
Code:
./set_voltage 1 90
all details here
https://bitcointalksearch.org/topic/bitmain-l3-voltage-control-toolfree-3546316
Stop buy chinese stuffs, absolutely not worth. Buy National stuffs, they steal your money in favour of communism capitalist.
I'm quite sure thoose who sold us the ASICs are true capitalists and the money will go to their Globalist Totalitarianism of which Communism is just a light version. It's Agenda 2030 and beyond there goal is at.
Just hope WWG1WGA WW will succed!!!
(Q = red pilling and waking people up and draining the swamps)
I've been stupid to buy chinese again. But I vow that I will not be anymore prey of the communist Chinese.
They are and will be always my first enemy. I hate the communism capitalist of these people not able to create added value. Thinks about the salary of people that is building asics in factories. They are trying to build a new Roman Era with their modern slaves. But pay attention Chinese, in the Roman Empire we have built streets, aqueducts and a big army ready to fight anyone. Not to build obsolete miners. Also the Moore's Law, do you remember the famous 18 months in ICT? Well, with these new miners this law has been destroyed.
Pay attention chinese, or the Old Empire will destroy you.
Stop buy chinese stuffs, absolutely not worth. Buy National stuffs, they steal your money in favour of communism capitalist.
I'm quite sure thoose who sold us the ASICs are true capitalists and the money will go to their Globalist Totalitarianism of which Communism is just a light version. It's Agenda 2030 and beyond their goal is at.
Just hope WWG1WGA WW will succed!!!
(Q = red pilling and waking people up and draining the swamps)
I am very upset by having invested in miners. I will never buy miners again. It's not worth. I have better solutions to invest my money. Losing time, money and effort for a too low and long return in time. So the true is save your money and invest in better stuffs.
I overclocked miners , I tried everything to maximize the return but again is not enough.
Save your money, save your time, don't buy it.
I overclocked miners , I tried everything to maximize the return but again is not enough.
Save your money, save your time, don't buy it.
We are all very upset!!!
where can i download a legit batch 1 firmware?
May 26 firmware:
File: Antminer-Z9-Mini-201805262047-500M.tar.gz
sha-1: 8791eee569dfff728c8363e5d8fd93f68957a2ee
https://ufile.io/fwcqd
(This link goes to the May 26 firmware which I've shared at Uploadfiles.io and the link should work for 30 days from september 10, 2018!)
Stop buy chinese stuffs, absolutely not worth. Buy National stuffs, they steal your money in favour of communism capitalist.
I am very upset by having invested in miners. I will never buy miners again. It's not worth. I have better solutions to invest my money. Losing time, money and effort for a too low and long return in time. So the true is save your money and invest in better stuffs.
I overclocked miners , I tried everything to maximize the return but again is not enough.
Save your money, save your time, don't buy it.
I overclocked miners , I tried everything to maximize the return but again is not enough.
Save your money, save your time, don't buy it.
We managed to OC some of our Batch 2 devices up to 706 with stable hashrates for 19hrs. We are very excited about the results.
https://abload.de/img/2018-09-22_083403c5e0c.jpg
https://abload.de/img/2018-09-22_083403c5e0c.jpg
where can i download a legit batch 1 firmware?
so why does everyone think they are entitled to this massive overclock on these?
People seem genuinely confused and offended that their machine can only overclock 50% over the advertised rate.
No one promised you anything but 10k sols, if you get even a fraction more than that you should be happy.
Instead people want to try and RMA machines that dont overclock enough for their liking?
People seem genuinely confused and offended that their machine can only overclock 50% over the advertised rate.
No one promised you anything but 10k sols, if you get even a fraction more than that you should be happy.
Instead people want to try and RMA machines that dont overclock enough for their liking?
how cool you're keeping the miner/room, and some luck. To troubleshoot, I always first reboot the miner and keep an eye on it. If it can't hold the freq that it used to be able to handle, then I try to figure out what changed. In all of my similar situations, the change was always the temperature in the room (one time I moved a miner to a hotter location, another time the A/C went out). Once I got the miner back to the same room temperature conditions it was in before, it worked like before. These boxes are a little finicky at the higher freq.
Yep, doesn't make sense to me because they never go above 70c. yet when they do die it's only during the hottest part of the day despite regardless of fan setting.
Jump to: