seems my naked R1 will goes offline after 70 hours or so....
what should I key in the "Scheduled Task" tab to auto reboot the R1 let's say every 48 hours?
Topic: ¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤ - page 16. (Read 97886 times)
I have to take my fun runners down for a bit while I chase down a problem, they'll be back soon.
Yes - not sure why it took so long to accept shares. But it seems to have leveled off. I have a small USB fan on it too.
So, I think it looks good and no further action is required
If you want, you can try to overclock it with confidence.
MINER -> R1 MINER Configuration -> Advanced settings
Change: -> frequency
Voltage: can you kept untouched, changes does not make any difference...
On stock it´s possible to run it stable in most cases up to 150/175MHz
(with a little air fan)
Little hint:
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update
andY
Thanks Andy. Very helpful. Cranked it up to 150MHz and we'll see what it does.
Yes - not sure why it took so long to accept shares. But it seems to have leveled off. I have a small USB fan on it too.
So, I think it looks good and no further action is required
If you want, you can try to overclock it with confidence.
MINER -> R1 MINER Configuration -> Advanced settings
Change: -> frequency
Voltage: can you kept untouched, changes does not make any difference...
On stock it´s possible to run it stable in most cases up to 150/175MHz
(with a little air fan)
Little hint:
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update
andY
Frequency is 100M
Voltage is 0725
What do you suggest?
but I see your R1 seems to running now in the right way...
Antrun shows now a hashrate of: 6.36 GH/s,
-> http://www.antrun.de/
Thats okay for a clockrate of about 100MHz...
I would suggest, to be patient for a moment and lets observe it...
andY
Yes - not sure why it took so long to accept shares. But it seems to have leveled off. I have a small USB fan on it too.
Frequency is 100M
Voltage is 0725
What do you suggest?
but I see your R1 seems to running now in the right way...
Antrun shows now a hashrate of: 6.36 GH/s,
-> http://www.antrun.de/
Thats okay for a clockrate of about 100MHz...
I would suggest, to be patient for a moment and lets observe it...
andY
OK - got the FW installed and it changed a lot of settings. It's certainly hashing faster. But still not getting any shares accepted. Can you see anything wrong?
http://imgur.com/WZCpt5b
http://imgur.com/WZCpt5b
Ok, seems, you got the first success
,I see now your Antrouter hashing @ antrun: -> http://www.antrun.de/
But it works very slowly, there seems to be another issue too....
Can you post a screenshot from:
MINER -> R1 MINER Configuration -> Advanced settings
andY
Frequency is 100M
Voltage is 0725
What do you suggest?
Hey, runners. Got my internet on and my new router setup last night and my R1 is back up and fun-running. Good luck, everyone!
@Denizs66:
Wow: 410Gh/s with an Antrouter R1?
No cheating!Wow: 410Gh/s with an Antrouter R1
?Hi Mike, nice to see you back on antrun again
!andY
OK - got the FW installed and it changed a lot of settings. It's certainly hashing faster. But still not getting any shares accepted. Can you see anything wrong?
http://imgur.com/WZCpt5b
http://imgur.com/WZCpt5b
Ok, seems, you got the first success
,I see now your Antrouter hashing @ antrun: -> http://www.antrun.de/
But it works very slowly, there seems to be another issue too....
Can you post a screenshot from:
MINER -> R1 MINER Configuration -> Advanced settings
andY
Hey, runners. Got my internet on and my new router setup last night and my R1 is back up and fun-running. Good luck, everyone!
@Denizs66:
Wow: 410Gh/s with an Antrouter R1?
No cheating! Wow: 410Gh/s with an Antrouter R1
?Did you flash the Firmware patch from the first post of this thread?
Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
Ahh, I think thats it Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
!!@swimmer63:
did you flashed the proper custom FW before?
It´s neccessary to join antrun with your R1
!You´ll find the FW and all instructions here:
-> Custom FW and instructions
andY
Did not. Missed that. Working on it now. May come back with more questions. Not a tech guy.
!But don´t worry about, it´s very easy
.And if any questions feel free to ask...
andY
OK - got the FW installed and it changed a lot of settings. It's certainly hashing faster. But still not getting any shares accepted. Can you see anything wrong?
http://imgur.com/WZCpt5b
@Denizs66:
Wow: 410Gh/s with an Antrouter R1?
Thats amazing
Wow: 410Gh/s with an Antrouter R1
?Thats amazing
Did you flash the Firmware patch from the first post of this thread?
Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
Ahh, I think thats it Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
!!@swimmer63:
did you flashed the proper custom FW before?
It´s neccessary to join antrun with your R1
!You´ll find the FW and all instructions here:
-> Custom FW and instructions
andY
Did not. Missed that. Working on it now. May come back with more questions. Not a tech guy.
!But don´t worry about, it´s very easy
.And if any questions feel free to ask...
andY
Did you flash the Firmware patch from the first post of this thread?
Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
Ahh, I think thats it Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
!!@swimmer63:
did you flashed the proper custom FW before?
It´s neccessary to join antrun with your R1
!You´ll find the FW and all instructions here:
-> Custom FW and instructions
andY
Did not. Missed that. Working on it now. May come back with more questions. Not a tech guy.
What do you write in putty once you have logged in to get access to cgminer like you would if you ran a single instance through windows?
1. First of all you have to stop the cron job (Web Gui -> SYSTEM -> STARTUP -> Cronejob -> Disable)
2. After than restart the cgminer (Web Gui -> SYSTEM -> STARTUP -> cgminer -> Restart)
3. Now you have to insert and start the following line:
cgminer --antrouter-options 115200:1:100:0783 -o solo.ckpool.org:3333 -u YOUR_BTC_ADDRESS_WORKER
That starts mining with your BTC address and 100MHz @ckpool.
If you want to run it in a overclocked mode, you must change the Clockspeed Values:
cgminer --antrouter-options 115200:1:100:0783 -o solo.ckpool.org:3333 -u YOUR_BTC_ADDRESS_WORKER
Thats all
Note: If you stop the cgminer, it´s neccessary to do step 2 (WebGui -> cgminer Restart) before you change the clockspeed and start the cgminer again!
Cheers,
andY
What do you write in putty once you have logged in to get access to cgminer like you would if you ran a single instance through windows?
No, not the rejected ones .
HW errors you´ll find here: (red marked)
.HW errors you´ll find here: (red marked)
Ohh than Im only to stupid
I thought that we are able to check it in the webinterface too
My second R1 (andymanone 2) is running out of the box ("as it is", w/o any Cooling oder modding) @150MHz stable over weeks, no stops, no HW errors.
No Hardware Errors
I count around 10 per day if I'm looking correct under "rejected" or am I wrong here?
No, not the rejected ones
.HW errors you´ll find here: (red marked)
andY
Did you flash the Firmware patch from the first post of this thread?
Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
Ahh, I think thats it Also check the correct pool adress under tab "R1 Miner configuration"
solo.ckpool.org:3333 - should be the right one for you
!!@swimmer63:
did you flashed the proper custom FW before?
It´s neccessary to join antrun with your R1
!You´ll find the FW and all instructions here:
-> Custom FW and instructions
andY
Some other issue. Not sure what is going on. My "R1 Miner" page shows it's mining at 5,29 gh/s. My "U3 Status" page shows the ck pool alive, but I am not getting any shares accepted. They are all getting discarded. Any ideas?
Hmm, sounds strange...Did you running both (R1 and U3) together?
Did you set the proper pool information?
e.g here:
Can you try to connect via ssh and start cgminer manually?
In your case you have to insert and start the following line:
cgminer --antrouter-options 115200:1:100:0783 -o solo.ckpool.org:3333 -u 15yPCq8kUq2uNfQ3pQUnkxtXgZgdWAGGM9
(-> starts mining with your BTC address and 100MHz @ckpool)
When it´s running, you can check the output.
It should looks like this:
andY
Jump to: