¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤ - page 32.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: Real-Duke on April 18, 2016, 09:38:43 AM

Quote from: andymanone on April 18, 2016, 08:44:48 AM

@booblelp: 141 GH/s over a week with an Antrouter R1 ?

Wow Shocked

!

Gtx,
André

He should mine to a new payout address never used from another miner of him.

Yes, I definitely agree. That should be one of the other very few rules we have, that you must use a brand new address to mine to so as not to adversely affect the stats reported on the web page.

Looks like another cksolo block solve over the weekend as the bestshare stats have reset again.

gt_addict

hero member

Activity: 2534

Merit: 623

Mine won't go above 131.25mhz since I plugged the gekko stick into it. Just wondered if it was easy to add an external power source to it aswell to give it a try and see if it will go further.

RichBC

hero member

Activity: 588

Merit: 500

Quote from: gt_addict on April 18, 2016, 11:33:49 AM

Im interested in any simplemods you can do to it to get it to hash faster Grin

Pictures speak a thousand words aswell Wink

I find that a standard R1 runs well up to 200Mhz with no mods at all. You can probably go a little further just with a fan, then you need to take it apart and can go a little further by adding a pot to increase the Core voltage, then it needs and external PSU.

However that is all very well until I can solve why it does not restart above 200MHz? What I cannot remember is when I first set this up if I had this restart problem or if I only did some quick tests to see how high I could go?

There is a lot of stuff in the R1 thread, here's a link to a post with a picture.

Quote from: RichBC on October 24, 2015, 07:51:38 AM

I have tidied things up and mounted the parts on a piece of wood, fitted a pot to allow the Core Voltage to be adjusted and we are ready to go.

I have been taking the Frequency up 25MHz at a time and adjusting the Core Voltage for a low HW error rate. Here are the results so far.

Code:

Setting	       MHz	V Core	    W	  GH    J/GH
														
1:300:0b82 	300	0.670	  10.2	16.50   0.62
2:275:0a82 	275	0.650	   9.0	15.13   0.60
2:250:0982  	250	0.635	   7.9	13.75   0.57
2:225:0882 	225	0.610	   6.8	12.38   0.55
5:150:0b83 	150	0.610	   5.0	8.25    0.61
7:100:0783 	100	0.610	   3.9	5.50    0.71

An interesting observation is that the Core Voltage needed for this single chip to give a low HW error rate is quite a bit lower than I have found with the S5 and the data sheet?

I have however had it just stop hashing for at 300MHz after 30 Minutes for no reason, started again with no problem? SoI am going to run for a while as 300MHz to check that things are stable before going any higher.

Rich

Around this post there will be others with information. I am going to go back myself and read them to see if it answers how long I ran for at the higher frequencies? Grin

Rich

gt_addict

hero member

Activity: 2534

Merit: 623

Im interested in any simplemods you can do to it to get it to hash faster Grin

Pictures speak a thousand words aswell Wink

RichBC

hero member

Activity: 588

Merit: 500

Quote from: andymanone on April 18, 2016, 09:58:50 AM

Quote from: RichBC on April 18, 2016, 09:30:33 AM

Quote from: andymanone on April 18, 2016, 09:26:00 AM

Quote from: citronick on April 18, 2016, 09:07:12 AM

.... it would be nice to have.... fastest speed ever recorded by R1 in this race Shocked

Ohh, yesss Grin

!

But I just working on a real "Boost to the limit"-Mod for an Antrouter R1

.

Yesterday I achieved my first small success

.

But it´s Beta at the moment.

When it runs stable, I´ll post it here (Howto Mod, my Custom-FW Patch for it and pictures too.

Gtx.,
André

I have had my first R1, not the one in the table, up to 300MHz however for some reason I cannot track down when it stops and is restarted by the Cron Job at any frequency over 200MHz it does not reliably restart. Am still trying things but cannot get to the bottom of the problem?

Rich

Hi Rich,
not sure, what you´ve done?
Did you only increase the clock rate?
You should bear in mind, that the Asic must be (active) cooled and you have to check the stability of the internal powersupply,
looking for voltage sags (the internal PS is not suitable, if you´re looking for max overclocking)

The PBC-layout and the PS for the ASIC was dimensioned for a power consumption of about 3.43A (+/-)
After overclocking the power consumption only for the Asic will rising up to 12,3 A and more!

But I just working on it

, If I got more, detailed results soon, I´ll share it here

André

The R1 is out of it's case, has additional heatsinks and a temperature controlled fan. It's also powered by an external 5V PSU and I have added a Pot to enable me to increase the Core Voltage which is monitored with a digital display.

The problem is that I can get it to run, no HW errors, at frequencies above 200MHz, but when it stops as all R1's do this is detected by the Cron Job which restarts cgminer but it does not then start hashing again. At 200MHz & below it also stops from time to time and restarts without problem.

Rich

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: RichBC on April 18, 2016, 09:30:33 AM

Quote from: andymanone on April 18, 2016, 09:26:00 AM

Quote from: citronick on April 18, 2016, 09:07:12 AM

.... it would be nice to have.... fastest speed ever recorded by R1 in this race Shocked

Ohh, yesss Grin

!

But I just working on a real "Boost to the limit"-Mod for an Antrouter R1

.

Yesterday I achieved my first small success

.

But it´s Beta at the moment.

When it runs stable, I´ll post it here (Howto Mod, my Custom-FW Patch for it and pictures too.

Gtx.,
André

I have had my first R1, not the one in the table, up to 300MHz however for some reason I cannot track down when it stops and is restarted by the Cron Job at any frequency over 200MHz it does not reliably restart. Am still trying things but cannot get to the bottom of the problem?

Rich

Hi Rich,
not sure, what you´ve done?
Did you only increase the clock rate?
You should bear in mind, that the Asic must be (active) cooled and you have to check the stability of the internal powersupply,
looking for voltage sags (the internal PS is not suitable, if you´re looking for max overclocking)

The PBC-layout and the PS for the ASIC was dimensioned for a power consumption of about 3.43A (+/-)
After overclocking the power consumption only for the Asic will rising up to 12,3 A and more!

But I just working on it

, If I got more, detailed results soon, I´ll share it here

André

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Real-Duke on April 18, 2016, 09:38:43 AM

Quote from: andymanone on April 18, 2016, 08:44:48 AM

@booblelp: 141 GH/s over a week with an Antrouter R1 ?

Wow Shocked

!

Gtx,
André

He should mine to a new payout address never used from another miner of him.

Old Address + New Address = 141GHs?

Real-Duke

legendary

Activity: 3486

Merit: 2287

Top Crypto Casino

Quote from: andymanone on April 18, 2016, 08:44:48 AM

@booblelp: 141 GH/s over a week with an Antrouter R1 ?

Wow Shocked

!

Gtx,
André

He should mine to a new payout address never used from another miner of him.

RichBC

hero member

Activity: 588

Merit: 500

Quote from: andymanone on April 18, 2016, 09:26:00 AM

Quote from: citronick on April 18, 2016, 09:07:12 AM

.... it would be nice to have.... fastest speed ever recorded by R1 in this race Shocked

Ohh, yesss Grin

!

But I just working on a real "Boost to the limit"-Mod for an Antrouter R1

.

Yesterday I achieved my first small success

.

But it´s Beta at the moment.

When it runs stable, I´ll post it here (Howto Mod, my Custom-FW Patch for it and pictures too.

Gtx.,
André

I have had my first R1, not the one in the table, up to 300MHz however for some reason I cannot track down when it stops and is restarted by the Cron Job at any frequency over 200MHz it does not reliably restart. Am still trying things but cannot get to the bottom of the problem?

Rich

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: citronick on April 18, 2016, 09:07:12 AM

.... it would be nice to have.... fastest speed ever recorded by R1 in this race Shocked

Ohh, yesss Grin

!

But I just working on a real "Boost to the limit"-Mod for an Antrouter R1

.

Yesterday I achieved my first small success

.

But it´s Beta at the moment.

When it runs stable, I´ll post it here (Howto Mod, my Custom-FW Patch for it and pictures too.

Gtx.,
André

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

.... it would be nice to have.... fastest speed ever recorded by R1 in this race Shocked

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Yes, I know

, it was a joke Wink

.

André

RichBC

hero member

Activity: 588

Merit: 500

Quote from: andymanone on April 18, 2016, 08:44:48 AM

@booblelp: 141 GH/s over a week with an Antrouter R1 ?

Wow Shocked

!

Gtx,
André

Definitely not an R1. Would need to clocked at 2000MHz

Rich

andymanone

sr. member

Activity: 432

Merit: 250

@booblelp: 141 GH/s over a week with an Antrouter R1 ?

Wow Shocked

!

Gtx,
André

booblelp

newbie

Activity: 41

Merit: 0

can you delete the old worker?

new worker:

Name: booblelp

Country: Germany

http://solo.ckpool.org/users/1PdC45pyxkFbp6bNrJZCju6H2i8JqWH9v

my shares are all discarded but why?

ammi84

sr. member

Activity: 462

Merit: 251

Quote from: booblelp on April 18, 2016, 06:38:23 AM

ok i'll try it again

can you add me?

Name: booblelp

Country: Germany

http://solo.ckpool.org/users/1BYMBnRnqPZaT7NzBupPGhJtgP7518EJnM

hi,
added you but if possible give me a url with a worker
for example: http://solo.ckpool.org/workers/1myR1enMf4roWGUyYuhWv5m6sJrLeZ1jX_R1 (my R1)
the overall user-stats from you are a little bit high i suppose Wink

booblelp

newbie

Activity: 41

Merit: 0

ok i'll try it again

can you add me?

Name: booblelp

Country: Germany

http://solo.ckpool.org/users/1BYMBnRnqPZaT7NzBupPGhJtgP7518EJnM

Buchi-88

legendary

Activity: 3976

Merit: 2639

Quote from: booblelp on April 18, 2016, 06:26:54 AM

can you add me?

booblelp

Germany

1BYMBnRnqPZaT7NzBupPGhJtgP7518EJnM

You need for the add a full CKSolo Pool link:

For example:

http://solo.ckpool.org/workers//13gtAPBFkrTq5QEnyd4pBKF2wDWvdKd7mw_Antrouter

regards

To the German Link:

https://bitcointalksearch.org/topic/antrunde-antrouter-r1-fun-run-compare-your-share-german-support-thread-1412287

booblelp

newbie

Activity: 41

Merit: 0

can you add me?

booblelp

Germany

1BYMBnRnqPZaT7NzBupPGhJtgP7518EJnM

ammi84

sr. member

Activity: 462

Merit: 251

Quote from: elokk on April 17, 2016, 10:31:08 PM

http://solo.ckpool.org/workers/15aSLCmngYvrJN6RNGxQvVBx88Q5ry5bdd_elokk

I have ck solo as my backup to a peercoin solo but it appears I am currently mining at ck

hi
can i add you to the page?
just give me a message and i will add you to the database

greetings

Topic: ¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤ - page 32. (Read 97864 times)