People say to flash the BIOS to vega64.
What if your card has Hynix and the vega64 model in your product line has samsung? Isn't that going to brick the card?
Topic: Any word on amd vega hash rates? - page 8. (Read 202550 times)
anyone have a good optimization for cryptonight heavy or light for vega 64? I get 2k hash on regular cryptonight but I get around 1400h/s on cryptonight heavy and 16600h/s on cryptonight light
Regular Vega 56s and 64s do only about 1400-1500h/s on CN-Heavy. The exception are Vega Frontiers. They do 2350H/s on CN-Heavy. Vega Frontiers are the kings on all the cryptonight algos.
thanks for the tip, got 4 and currently mining Monero. After I water cool them next week will try CN-Heavy
anyone have a good optimization for cryptonight heavy or light for vega 64? I get 2k hash on regular cryptonight but I get around 1400h/s on cryptonight heavy and 16600h/s on cryptonight light
Regular Vega 56s and 64s do only about 1400-1500h/s on CN-Heavy. The exception are Vega Frontiers. They do 2350H/s on CN-Heavy. Vega Frontiers are the kings on all the cryptonight algos.
Yeah i knew it when i saw 16gb of ram built in. Do you have any vega 56 with stock bios running stable using castxmr/srbminer? Would you share your Overdriventool/soft powerplay table(im mining for power efficiency tnx,currently at 110 w based on hwinfo64)?
anyone have a good optimization for cryptonight heavy or light for vega 64? I get 2k hash on regular cryptonight but I get around 1400h/s on cryptonight heavy and 16600h/s on cryptonight light
Regular Vega 56s and 64s do only about 1400-1500h/s on CN-Heavy. The exception are Vega Frontiers. They do 2350H/s on CN-Heavy. Vega Frontiers are the kings on all the cryptonight algos.
anyone have a good optimization for cryptonight heavy or light for vega 64? I get 2k hash on regular cryptonight but I get around 1400h/s on cryptonight heavy and 16600h/s on cryptonight light
Decreased hashrates on the other algos you mentioned are normal. Cryptonight-heavy is called heavy because it exerts a heavier load on your CPU processing power. You don't need to worry about anything because every one has decreased hashrates and that is the new standard hashrate.
The small hash rate drop I saw is due to the Windows 10 update that dropped yesterday.
I loaded the new AMD driver and the only issue I noted was that OverdriveNTool doesn't spin the fan up on one of my two Vega64 when I command it. Once I start the miner up - it spins up. Not sure why it is acting that way now. Hash rates are no difference vs. the previous driver.
I suspect while the situation with the newer Adrenaline drivers is much improved the blockchain drivers are still a little faster for mining. With my Vega64 clocked 1408 core and 1100 memory I'm getting 1950 h/s. With the blockchain drivers it would be 100 h/s more than that. I don't want to deal with the issues those drivers have especially on a system like this where it isn't a dedicated miner.
I loaded the new AMD driver and the only issue I noted was that OverdriveNTool doesn't spin the fan up on one of my two Vega64 when I command it. Once I start the miner up - it spins up. Not sure why it is acting that way now. Hash rates are no difference vs. the previous driver.
I suspect while the situation with the newer Adrenaline drivers is much improved the blockchain drivers are still a little faster for mining. With my Vega64 clocked 1408 core and 1100 memory I'm getting 1950 h/s. With the blockchain drivers it would be 100 h/s more than that. I don't want to deal with the issues those drivers have especially on a system like this where it isn't a dedicated miner.
Anybody load the new AMD driver? Does it break anything? Change hash rates?
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
yeah iim on 18.4.1 latest amd driver on both my vega 56 and 64 rigs and they are working normal no hashrate drops or anything !
anyone have a good optimization for cryptonight heavy or light for vega 64? I get 2k hash on regular cryptonight but I get around 1400h/s on cryptonight heavy and 16600h/s on cryptonight light
Since I haven't loaded the new driver yet. I would tend to blame the Windows update on this client for causing that drop in hash.
I'm not sure if anyone has tried the new AMD driver - there has been zero talk of it here. I'm tempted however am a little concerned about causing new issues such as breaking OverdriveNTool.
I'm not sure if anyone has tried the new AMD driver - there has been zero talk of it here. I'm tempted however am a little concerned about causing new issues such as breaking OverdriveNTool.
Anybody load the new AMD driver? Does it break anything? Change hash rates?
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
But is that the new driver that is responsible or new windows?
Anybody load the new AMD driver? Does it break anything? Change hash rates?
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
Been working on tuning these hynix red devil vega56 for a few days. Over time I've discovered that I have one "bad" card that will not go over 870mhz without invalid results. Another one won't go over 900mhz. The other cards will do 935mhz with an invalid result every 600+ shares.
1730 h/s for the higher clocked gpu in the rig and less for the slower cards. I am going to try for intensity next and see if that can push closer to 1800 h/s.
Good thing I don't mind tinkering with these settings. It can take days of testing to figure out the limits on clocks for each gpu and the best XMR-STAK configuration.
1730 h/s for the higher clocked gpu in the rig and less for the slower cards. I am going to try for intensity next and see if that can push closer to 1800 h/s.
Good thing I don't mind tinkering with these settings. It can take days of testing to figure out the limits on clocks for each gpu and the best XMR-STAK configuration.
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
I would say because it is difficult to get accurate figures for this, you are talking about 13W in 164W, that's small.
Possible sources of error;
V64 system, two cards, V54 system, 8 cards. 4 to 1 difference in power you are trying to calculate, 4/1 error factor.
Is this two rigs or one? or more?
You ARE running the V56 core at higher voltage than V64, 900mV versus 890mV. Not much maybe but it adds to the problem.
You have the fan target at different temps.
You have the power target at different powers.
So you're not comparing like with like.
Baz
yes they are 2 rigs the links to the images are posted there where it says IMAGE
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
I would say because it is difficult to get accurate figures for this, you are talking about 13W in 164W, that's small.
Possible sources of error;
V64 system, two cards, V54 system, 8 cards. 4 to 1 difference in power you are trying to calculate, 4/1 error factor.
Is this two rigs or one? or more?
You ARE running the V56 core at higher voltage than V64, 900mV versus 890mV. Not much maybe but it adds to the problem.
You have the fan target at different temps.
You have the power target at different powers.
So you're not comparing like with like.
Baz
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
how are you measuring the power draw? hwinfo64/psu?
i have a meter on the wall outlet and it tells me the wattage use
I have an issue with my 6 card ref vega 56 @ 64 rig.
Everything work well for hours or day(s) long until the fan speed of 1 card drops to 7-800 rpm, then the cast-xmr stops, sometimes freezes.
I've experienced this before on a completely different rig as well.
Did anyone experience something similar?
Any ideas?
Win-10, blockchain driver, asus h270-plus mobo, PPT mod.
Everything work well for hours or day(s) long until the fan speed of 1 card drops to 7-800 rpm, then the cast-xmr stops, sometimes freezes.
I've experienced this before on a completely different rig as well.
Did anyone experience something similar?
Any ideas?
Win-10, blockchain driver, asus h270-plus mobo, PPT mod.
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
how are you measuring the power draw? hwinfo64/psu?
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
You will have to give us more information for us to help you. Some guide questions listed below should help:
1. Are you sure that you did overclock them correctly? Seems like they are at default clock settings.
2. Did you install the soft power play tables? This is a must for maximum profitability too
3. What driver version are you using?
1. I OC them all in Wattman but these two drop hashrate after a short period of time (1hour or so).
2. No, please provide with info how to do this.
3. Blockchain drivers, I tried new drivers but my cards was crashing like every few hours with them so I stick to blockchain.
I also tried flashing them to bios 64, but that again didn't work well they were crashing for some reason. Do I need to flash them again to 64?
Thanks
hey i can help with your rig to set it up correctly and try to get it stable
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
You will have to give us more information for us to help you. Some guide questions listed below should help:
1. Are you sure that you did overclock them correctly? Seems like they are at default clock settings.
2. Did you install the soft power play tables? This is a must for maximum profitability too
3. What driver version are you using?
1. I OC them all in Wattman but these two drop hashrate after a short period of time (1hour or so).
2. No, please provide with info how to do this.
3. Blockchain drivers, I tried new drivers but my cards was crashing like every few hours with them so I stick to blockchain.
I also tried flashing them to bios 64, but that again didn't work well they were crashing for some reason. Do I need to flash them again to 64?
Thanks
He probably bought 56s which usually are Hynix nowadays. Every 64 I've seen comes with Samsung.
Thats what i though, i bought two from amazon just for test,
when i receive i will post here
Thanks
Jump to: