Anybody load the new AMD driver? Does it break anything? Change hash rates?
After the windows 10 update I lost about 15-20 h/s with my vega64. I had one gpu 2005 h/s and now I'm back to 1985 h/s.
Topic: Any word on amd vega hash rates? - page 9. (Read 202722 times)
Been working on tuning these hynix red devil vega56 for a few days. Over time I've discovered that I have one "bad" card that will not go over 870mhz without invalid results. Another one won't go over 900mhz. The other cards will do 935mhz with an invalid result every 600+ shares.
1730 h/s for the higher clocked gpu in the rig and less for the slower cards. I am going to try for intensity next and see if that can push closer to 1800 h/s.
Good thing I don't mind tinkering with these settings. It can take days of testing to figure out the limits on clocks for each gpu and the best XMR-STAK configuration.
1730 h/s for the higher clocked gpu in the rig and less for the slower cards. I am going to try for intensity next and see if that can push closer to 1800 h/s.
Good thing I don't mind tinkering with these settings. It can take days of testing to figure out the limits on clocks for each gpu and the best XMR-STAK configuration.
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
I would say because it is difficult to get accurate figures for this, you are talking about 13W in 164W, that's small.
Possible sources of error;
V64 system, two cards, V54 system, 8 cards. 4 to 1 difference in power you are trying to calculate, 4/1 error factor.
Is this two rigs or one? or more?
You ARE running the V56 core at higher voltage than V64, 900mV versus 890mV. Not much maybe but it adds to the problem.
You have the fan target at different temps.
You have the power target at different powers.
So you're not comparing like with like.
Baz
yes they are 2 rigs the links to the images are posted there where it says IMAGE
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
I would say because it is difficult to get accurate figures for this, you are talking about 13W in 164W, that's small.
Possible sources of error;
V64 system, two cards, V54 system, 8 cards. 4 to 1 difference in power you are trying to calculate, 4/1 error factor.
Is this two rigs or one? or more?
You ARE running the V56 core at higher voltage than V64, 900mV versus 890mV. Not much maybe but it adds to the problem.
You have the fan target at different temps.
You have the power target at different powers.
So you're not comparing like with like.
Baz
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
how are you measuring the power draw? hwinfo64/psu?
i have a meter on the wall outlet and it tells me the wattage use
I have an issue with my 6 card ref vega 56 @ 64 rig.
Everything work well for hours or day(s) long until the fan speed of 1 card drops to 7-800 rpm, then the cast-xmr stops, sometimes freezes.
I've experienced this before on a completely different rig as well.
Did anyone experience something similar?
Any ideas?
Win-10, blockchain driver, asus h270-plus mobo, PPT mod.
Everything work well for hours or day(s) long until the fan speed of 1 card drops to 7-800 rpm, then the cast-xmr stops, sometimes freezes.
I've experienced this before on a completely different rig as well.
Did anyone experience something similar?
Any ideas?
Win-10, blockchain driver, asus h270-plus mobo, PPT mod.
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
how are you measuring the power draw? hwinfo64/psu?
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
You will have to give us more information for us to help you. Some guide questions listed below should help:
1. Are you sure that you did overclock them correctly? Seems like they are at default clock settings.
2. Did you install the soft power play tables? This is a must for maximum profitability too
3. What driver version are you using?
1. I OC them all in Wattman but these two drop hashrate after a short period of time (1hour or so).
2. No, please provide with info how to do this.
3. Blockchain drivers, I tried new drivers but my cards was crashing like every few hours with them so I stick to blockchain.
I also tried flashing them to bios 64, but that again didn't work well they were crashing for some reason. Do I need to flash them again to 64?
Thanks
hey i can help with your rig to set it up correctly and try to get it stable
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
You will have to give us more information for us to help you. Some guide questions listed below should help:
1. Are you sure that you did overclock them correctly? Seems like they are at default clock settings.
2. Did you install the soft power play tables? This is a must for maximum profitability too
3. What driver version are you using?
1. I OC them all in Wattman but these two drop hashrate after a short period of time (1hour or so).
2. No, please provide with info how to do this.
3. Blockchain drivers, I tried new drivers but my cards was crashing like every few hours with them so I stick to blockchain.
I also tried flashing them to bios 64, but that again didn't work well they were crashing for some reason. Do I need to flash them again to 64?
Thanks
He probably bought 56s which usually are Hynix nowadays. Every 64 I've seen comes with Samsung.
Thats what i though, i bought two from amazon just for test,
when i receive i will post here
Thanks
He probably bought 56s which usually are Hynix nowadays. Every 64 I've seen comes with Samsung.
Hi guys,
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
Most likely that will be Hynix.
Most of my Vega PowerColors are hynix and seeing that is a "Devil" it means that it is aftermarket. All aftermarket VEGAs have a high chance of not having Samsung memory. If you want Samsung memory then you will probably have to buy 2nd hand reference models of those Vegas.
Hi,
Thanks for awnser,
Even the 64? I know could happen in 56,
Regards,
Hi guys,
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
Most likely that will be Hynix.
Most of my Vega PowerColors are hynix and seeing that is a "Devil" it means that it is aftermarket. All aftermarket VEGAs have a high chance of not having Samsung memory. If you want Samsung memory then you will probably have to buy 2nd hand reference models of those Vegas.
Hi guys,
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
anyone knows if PowerColor 8 GB Radeon RX Vega 64 Devil HBM2 PCI-EXPRESS Graphics Card could be samsung memory? or will be silicon lotery? xD
Built a 6 gpu vega56 rig recently with powercolor red devils. Hynix HBM. Kinda wish I'd just spent the extra $150 per gpu for vega64 asus rog.
Half my cards wont get over 880mhz without 2-3% invalid results. Increasing voltage w/OverdrivenTool doesn't help. Temps are great. Adrenaline drivers.
1650 h/s.
Half my cards wont get over 880mhz without 2-3% invalid results. Increasing voltage w/OverdrivenTool doesn't help. Temps are great. Adrenaline drivers.
1650 h/s.
What's a good supplier for Vega's in Europe? Caseking.de?
Need shipping to Macedonia.
Thanks!
Need shipping to Macedonia.
Thanks!
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
You will have to give us more information for us to help you. Some guide questions listed below should help:
1. Are you sure that you did overclock them correctly? Seems like they are at default clock settings.
2. Did you install the soft power play tables? This is a must for maximum profitability too
3. What driver version are you using?
hey guys these are my settings for my vega 56 and vega 64 rigs
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
OVERDRIVENTOOL SETTINGS
VEGA 56 (8x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1408;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=700;900;0
Mem_P3=950;850
Fan_Min=2600
Fan_Max=4900
Fan_Target=60
Fan_Acoustic=2300
Power_Temp=75
Power_Target=-20
THESE PULL OUT THE WALL = 164w PER CARD
IMAGE = https://prntscr.com/jbfwgp
--------------------------------------------
VEGA 64 (2x)
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1408;890
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;870
Fan_Min=3200
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0
THESE PULL OUT THE WALL = 151w EACH PER CARD
IMAGE = https://prntscr.com/jbfwyf
-------------------------------------------------------------------
BTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTCBTC
I have 6x Sapphire Nitro+ Vega 56, anyone knows why two of them can't reach hashrate of others?
https://prnt.sc/jbcymv
https://prnt.sc/jbcymv
Anyone have cryptonight heavy vega 64/56 hashrates?
Jump to: