Ask here https://discord.gg/KKdNvyu
Hello friend, how are you?
Could you introduce your development team?
Thank you very much for your attention.
Topic: Arctic Coin (ARC), No premine, Evolution over 1 year - page 30. (Read 82177 times)
Hello friend, how are you?
Could you introduce your development team?
Thank you very much for your attention.
Ask here https://discord.gg/KKdNvyu
hi guys, this bothers me alot
if i check the goldminenode status
10:40:56

{
"vin": "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
"service": "x.x.x.x:7209",
"status": "Not capable goldminenode: Could not connect to x.x.x.x:7209"
}
but my masternode active and on the list
so , what is it good or wrong
Do need extra IP adrsses for multiple masternodes?
I run 5 masternodes on same IP.Here is .conf for all nodes.
#ARC02
listen=1
daemon=1
server=1
rpcuser=any
rpcpassword=any
rpcallow=127.0.0.1
rpcallowip=127.0.0.1
# You have to set different RPCport for each MN (1601, 1602, etc)
rpcport=1602
# ExternalIP set same internet public IP address for all MNs
externalip=77.7.7.7:7209
# Bind each MN to a separate port (7210, 7211, etc)
# Dont bind first MN, you can launch it on default 7209 port
bind=127.0.0.1:7210
goldminenode=1
goldminenodeprivkey=
Your goldminenode.conf stay clear at all other MN's.
You need to fill it only for your control wallet.
ARC1 77.7.7.7:7209
ARC2 77.7.7.7:7209
Make a copy of your /&APPDATA/Roaming/ArcticCore and rename it to something like ARC1, ARC2, etc
Launch daemon for each new masternode with command:
arcticcoind -datadir=C:\Users\User\AppData\Roaming\ARC1 -daemon
arcticcoind -datadir=C:\Users\User\AppData\Roaming\ARC2 -daemon
Wait 5 minutes and check if daemon is synchronized:
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC1 mnsync status
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC2 mnsync status
Launch masternodes at your control (or first) wallet.
After 15-60 minutes check your masternodes status:
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC1 goldminenode status
arcticcoin-cli -datadir=C:\Users\User\AppData\Roaming\ARC2 goldminenode status
Use AM29x2gxn87PDFATN24jLgyrvX9kftiUpm to thank me
Can you introduce your team?
Thank you
Thank you
hi, sinds yesterday i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
Yes probably, just wait a couple of days and you'll be fine!
thx for the reply
couple days ??
darn , i like to see it in action
, now i am seeying only gray wallet with only 1000 arc in balance....but i will wait and check few days later ...
hi, sinds yesterday i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
Yes probably, just wait a couple of days and you'll be fine!
hi, sinds yesterday i managed the masternode , but i cant see any shit , i mean my masternode is in de list as active
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
at https://arcticcoin.org/en-EN/goldmine-list you can see my masternode
my masterndoe adres: 58e2adab9befe7b0e6a19b53810c128ad654926f6a18e4153ec1c0133278729a
but i didnt see any earnings and at the pictures i can see the masternode tab on the picture but my wallet has none?
my questions , am i to impatient and have wait little longer ? or did i do something wrong ??
Do need extra IP adrsses for multiple masternodes?
yes / since it's just one port for deamon / but I know some guys doing port binding and running multiple nodes on 1ip ..
Thanks for the information... I have already 3 ip adresses on my vps so wil setup 2 more masternodes :-)
Come to our exchange and buy shares in mining. 1 share in the mining gives 1 coin per day. Coins may sell or contribute and earn an income 1.2% daily
Want to get 300% profit in one day? Visit us on the exchange and buy coins for 0.1$ and sell for 0.4$, or not sell and make a contribution, may bring profit, 36% a month! Everything is in Your hands!!!
Where are we now with Arctic Coin (ARC)?
Do need extra IP adrsses for multiple masternodes?
yes / since it's just one port for deamon / but I know some guys doing port binding and running multiple nodes on 1ip ..
Do need extra IP adrsses for multiple masternodes?
cool , i think my masternode is now online
i started the MN with the command:
goldminenode start-all --> it says " results: succesfull"
goldminenode list-conf --> its say "status : Pre-ENABLED "
but when i check with
goldminenode status its say :
not capable goldmine: could not connect to x.x.x.x:7209
so what is it , is it working now or what
pls help
check your external ip and open firewall port 7209
i use this for reference https://arcticcoin.org/guides-goldmine
with my windows vps and ARC in my windows pc and all goes fine
watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?
Indeed, as a noob this not easy , i am stuck now??is there an manual how to manage masternode with windows??
i found this :
https://steemit.com/arcticcoin/@bapparabi/arcticcoin-master-node-setup-earn-passive-income
but most of the command wont recognized by the wallet and gives me error like :
goldmine start-all
Method not found (code -32601)
who can help me ?
goldminenode genkey
goldminenode outputs
goldminenode start-all
goldminenode status
thank you, now the command are recognized but i didnt do it right , so i am gonna do the steps again.
thx again
cool , i think my masternode is now online
i started the MN with the command:
goldminenode start-all --> it says " results: succesfull"
goldminenode list-conf --> its say "status : Pre-ENABLED "
but when i check with
goldminenode status its say :
not capable goldmine: could not connect to x.x.x.x:7209
pls help
i see my node online and active on https://arcticcoin.org/goldmine-list , so i this is good ??
My status keeps going to New_Start_Required (after it has said enabled previously), I then start alias again and it will go to pre-enabled and then to successfully enabled which I thought meant that the goldminenode was active. I installed everything a week from last Monday, so it has been around 10 days. I installed an eternity node a day later and have already received many deposits but none from arc. When I type on goldminestatus when it says, "New_Start_Required", it says: "Not capable goldminenode: Goldminenode in NEW_START_REQUIRED state" but then when I restart it goes to enabled and says, "Goldminenode successfully started". This has happened several times. Any suggestions?
I thought I would re-ask this question as I have not gotten a response from anyone. Any ideas? Please help...
Just for the sake of trying, did you try different providers(VPS)? I thought I would re-ask this question as I have not gotten a response from anyone. Any ideas? Please help...
Did you have an ip address change, and is the firewall configured properly?
watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?
Indeed, as a noob this not easy , i am stuck now??is there an manual how to manage masternode with windows??
i found this :
https://steemit.com/arcticcoin/@bapparabi/arcticcoin-master-node-setup-earn-passive-income
but most of the command wont recognized by the wallet and gives me error like :
goldmine start-all
Method not found (code -32601)
who can help me ?
goldminenode genkey
goldminenode outputs
goldminenode start-all
goldminenode status
thank you, now the command are recognized but i didnt do it right , so i am gonna do the steps again.
thx again
watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?
Indeed, as a noob this not easy , i am stuck now??is there an manual how to manage masternode with windows??
i found this :
https://steemit.com/arcticcoin/@bapparabi/arcticcoin-master-node-setup-earn-passive-income
but most of the command wont recognized by the wallet and gives me error like :
goldmine start-all
Method not found (code -32601)
who can help me ?
goldminenode genkey
goldminenode outputs
goldminenode start-all
goldminenode status
watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?
Indeed, as a noob this not easy , i am stuck now??is there an manual how to manage masternode with windows??
i found this :
https://steemit.com/arcticcoin/@bapparabi/arcticcoin-master-node-setup-earn-passive-income
but most of the command wont recognized by the wallet and gives me error like :
goldmine start-all
Method not found (code -32601)
who can help me ?
watching the coin is not easy to work with, for a person not possessing great knowledge in the the technical part, the additional complexity for me. Or it was originally intended to work with nodes only for professional techies?
My status keeps going to New_Start_Required (after it has said enabled previously), I then start alias again and it will go to pre-enabled and then to successfully enabled which I thought meant that the goldminenode was active. I installed everything a week from last Monday, so it has been around 10 days. I installed an eternity node a day later and have already received many deposits but none from arc. When I type on goldminestatus when it says, "New_Start_Required", it says: "Not capable goldminenode: Goldminenode in NEW_START_REQUIRED state" but then when I restart it goes to enabled and says, "Goldminenode successfully started". This has happened several times. Any suggestions?
I thought I would re-ask this question as I have not gotten a response from anyone. Any ideas? Please help...
Just for the sake of trying, did you try different providers(VPS)? I thought I would re-ask this question as I have not gotten a response from anyone. Any ideas? Please help...
Jump to: