Armory 0.96.5 - page 7. | Bitcointalksearch.org

walkingaround

newbie

Activity: 4

Merit: 2

Thank you, HCP.

I have already tried to rebuild and rescan databases many times with no success.

I waited on "organizing blockchain" for more than 12 hours. It was, however, not a first sync; I have been using Armory 96.0 for over two years with no problems. The trouble began as I changed to ver. 96.5.

I suspect that my bitcoin core blockchain is corrupted. Curiously, bitcoin core reported to be fully synchronized, but in an attempt to reindex chainstate bitcoin core reported a fatal error and does not start anymore.

Now, I am reindexing the whole bitcoin blockchain; this will take some long time.

I think that the origin of the failure is that an Armory process working in the background was killed as I shut down the computer and corrupted thereby the bitcoin blockchain files. I will write again if I get Armory running after rebuilding Bitcoin Core.

Thanks again!

HCP

legendary

Activity: 2086

Merit: 4363

I honestly can't see anything really obviously wrong with those logs?!? Sad

I would suggest that you attempt to use the "Rebuild and Rescan Databases" option from the help menu and see if that fixes it. Other than that, possibly running ArmoryDB manually from the command line (without ArmoryQT running) to see if it is behaving correctly.

Quote from: walkingaround on June 25, 2019, 05:26:38 AM

"organizing blockchain" for ages, but nothing else happens.

Note that the "organising blockchain" can take quite a while to finish on first sync... how long did you leave it running?

walkingaround

newbie

Activity: 4

Merit: 2

Hello to all, thanks for the many answers. In principle, I only wanted to know if 0.96.5/0.18.0 can work or I should give up. As you commented, I can expect normal functioning with those versions, that's good news.

On the other side, I can't succeed in getting Armory running, so that I post my logs and say many thanks in advance for your help.

Armory starts, rebuilds the data base and stucks. It is either offline or shows a status "online" but zero blocks. It shows "node status" with no change and "organizing blockchain" for ages, but nothing else happens.

I already rebooted many times since I am tryiing to get Armory running.

I tried already letting Armory run bitcoin core in background and also without that (i.e. bitcoin core running separately).

Drive J is a Samsung T3 (fast enough).

I changed bitcoin core's config:
listen=1
addnode=127.0.0.1
server=1

That's all, thank you for any hint.

Code:

Armorylog:

2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1284 - ************************************************************
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1285 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe --dbdir=J:\Users\User3\AppData\Roaming\Armory\databases --satoshi-datadir=J:\bitcoin
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1286 - ************************************************************
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1287 - Loading Armory Engine:
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1288 - Armory Version : 0.96.5
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1289 - Armory Build: : 8730390989
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1290 - PyBtcWallet Version : 1.35
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1291 - Detected Operating system: Windows
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1292 - OS Variant : 10-10.0.17763--Multiprocessor Free
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1293 - User home-directory : C:\Users\User3\AppData\Roaming
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1294 - Satoshi BTC directory : J:\bitcoin
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1295 - Armory home dir : C:\Users\User3\AppData\Roaming\Armory\
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1296 - Detected System Specs :
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1297 - Total Available RAM : 15.96 GB
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1298 - CPU ID string : AMD64 Family 21 Model 2 Stepping 0, AuthenticAMD
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1299 - Number of CPU cores : 8 cores
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1300 - System is 64-bit : True
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1301 - Preferred Encoding : cp1252
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1302 - Machine Arch : amd64
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1303 - Available HDD (ARM) : 958 GB
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1304 - Available HDD (BTC) : 209 GB
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1305 -
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1306 - Network Name: Main Network
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1307 - Satoshi Port: 8333
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1308 - Do wlt check: True
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1309 - Named options/arguments to armoryengine.py:
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - force_segwit : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - nettimeout : 2
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - rescan : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - force_fcgi : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - ignoreAllZC : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - rescanBalance : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - disableModules : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - port : None
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - interport : 8223
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - coverageOutputDir: None
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - forceWalletCheck: False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - regtest : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - rebuild : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - thread_count : -1
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - datadir : DEFAULT
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - clearMempool : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - offline : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - armoryDBDir : J:\Users\User3\AppData\Roaming\Armory\databases
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - armorydb_port : 9001
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - satoshiPort : DEFAULT
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - disableConfPermis: False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - useTorSettings : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - netlog : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - keypool : 100
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - coverageInclude : None
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - forceOnline : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - disableWalletCheck: False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - redownload : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - rpcBindAddr : 127.0.0.1
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - armorydb_ip : 127.0.0.1
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - multisigFile : DEFAULT
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - ram_usage : -1
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - ignoreZC : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - logDisable : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - settingsPath : C:\Users\User3\AppData\Roaming\Armory\ArmorySettings.txt
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - language : en
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - db_type : DB_FULL
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - doDebug : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - enableDetSign : True
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - mtdebug : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - testnet : False
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - rpcport : DEFAULT
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - satoshiHome : J:\bitcoin
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - satoshiRpcport : DEFAULT
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - logFile : C:\Users\User3\AppData\Roaming\Armory\ArmoryQt.exe.log.txt
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1311 - verbosity : None
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1312 - Other arguments:
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1315 - ************************************************************
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:1720 - C++ block utilities loaded successfully
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:3578 - Using settings file: C:\Users\User3\AppData\Roaming\Armory\ArmorySettings.txt
2019-06-25 11:23:48 (ERROR) -- ArmoryUtils.pyc:3735 - Unsupported language specified. Defaulting to English (en)
2019-06-25 11:23:48 (INFO) -- ArmoryUtils.pyc:3738 - Using Language: en
2019-06-25 11:23:48 (INFO) -- BDM.pyc:353 - Using the asynchronous/multi-threaded BlockDataManager.
2019-06-25 11:23:48 (INFO) -- BDM.pyc:354 - Blockchain operations will happen in the background.
2019-06-25 11:23:48 (INFO) -- BDM.pyc:355 - Devs: check TheBDM.getState() before asking for data.
2019-06-25 11:23:48 (INFO) -- BDM.pyc:356 - Registering addresses during rescans will queue them for
2019-06-25 11:23:48 (INFO) -- BDM.pyc:357 - inclusion after the current scan is completed.
2019-06-25 11:23:51 (INFO) -- ArmoryUtils.pyc:3578 - Using settings file: C:\Users\User3\AppData\Roaming\Armory\ArmorySettings.txt
2019-06-25 11:23:51 (INFO) -- ArmoryQt.py:2060 - loadWalletsAndSettings
2019-06-25 11:23:51 (INFO) -- ArmoryQt.py:2120 - Loading wallets...
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:2185 - Number of wallets read in: 9
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:2190 - Wallet (26Jaq9434): "Online Wallet " (Encrypted)
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:2190 - Wallet (2yxvwUv5M): "08 offline green (Wat" (No Encryption)
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:2190 - Wallet (2URaJxaPh): "07 offline green (Wat" (No Encryption)
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:2195 - Loading Multisig Lockboxes
2019-06-25 11:23:52 (INFO) -- ArmoryQt.py:1763 - acquiring process mutex...
2019-06-25 11:23:53 (INFO) -- ArmoryQt.py:1395 - setupUriRegistration
2019-06-25 11:23:53 (INFO) -- ArmoryQt.py:1513 - URL-register action: AskUser
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:566 - Usermode: Expert
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1698 - Changing usermode:
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1699 - From: Expert
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1707 - To: Expert
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1836 - startBitcoindIfNecessary
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1872 - setSatoshiPaths
2019-06-25 11:23:54 (INFO) -- ArmoryQt.py:1891 - Setting satoshi datadir = j:\bitcoin
2019-06-25 11:23:54 (INFO) -- SDM.pyc:171 - Found bitcoind in the following places:
2019-06-25 11:23:54 (INFO) -- SDM.pyc:173 - C:\Program Files\Bitcoin\daemon\bitcoind.exe
2019-06-25 11:23:54 (INFO) -- SDM.pyc:173 - C:\Program Files\Bitcoin\daemon\bitcoind.exe
2019-06-25 11:23:54 (INFO) -- SDM.pyc:175 - Using: C:\Program Files\Bitcoin\daemon\bitcoind.exe
2019-06-25 11:23:54 (INFO) -- SDM.pyc:340 - Called startBitcoind
2019-06-25 11:23:54 (WARNING) -- SDM.pyc:445 - Spawning bitcoind with command: C:\Program Files\Bitcoin\daemon\bitcoind.exe -datadir=j:\bitcoin
2019-06-25 11:23:54 (INFO) -- ArmoryUtils.pyc:689 - Executing popen: [u'C:\\Program Files\\Bitcoin\\daemon\\bitcoind.exe', '-datadir=j:\\bitcoin']
2019-06-25 11:23:55 (INFO) -- SDM.pyc:451 - PID of bitcoind: 4252
2019-06-25 11:23:55 (INFO) -- SDM.pyc:452 - PID of armory: 2664
2019-06-25 11:23:55 (INFO) -- ArmoryUtils.pyc:689 - Executing popen: ['C:\\Program Files (x86)\\Armory\\guardian.exe', '2664', '4252']
2019-06-25 11:23:58 (INFO) -- ArmoryQt.py:1923 - Setting netmode: 1
2019-06-25 11:23:58 (INFO) -- ArmoryQt.py:1905 - loadBlockchainIfNecessary
2019-06-25 11:23:58 (ERROR) -- ArmoryQt.py:1198 - 27 attempts to load blockchain failed. Remove mempool.bin.
2019-06-25 11:23:58 (ERROR) -- ArmoryQt.py:1203 - File mempool.bin does not exist. Nothing deleted.
2019-06-25 11:23:58 (INFO) -- ArmoryQt.py:1923 - Setting netmode: 1
2019-06-25 11:23:58 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode
2019-06-25 11:23:58 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode
2019-06-25 11:24:00 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode
2019-06-25 11:24:04 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode
2019-06-25 11:24:07 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode
2019-06-25 11:24:11 (INFO) -- ArmoryQt.py:4672 - Dashboard switched to "Scanning" mode

=============

dblog:

Log file opened at 11:21:50.000: C:\Users\User3\AppData\Roaming\Armory\dbLog.txt
-INFO - 11:21:50.000: (e:\users\goat\code\armory3\cppforswig\main.cpp:32) Running on 8 threads
-INFO - 11:21:50.000: (e:\users\goat\code\armory3\cppforswig\main.cpp:33) Ram usage level: 50
-INFO - 11:21:50.093: (e:\users\goat\code\armory3\cppforswig\blockutils.cpp:915) blkfile dir: J:\bitcoin\blocks
-INFO - 11:21:50.093: (e:\users\goat\code\armory3\cppforswig\blockutils.cpp:916) lmdb dir: J:\Users\User3\AppData\Roaming\Armory\databases
-INFO - 11:21:50.093: (e:\users\goat\code\armory3\cppforswig\lmdb_wrapper.cpp:388) Opening databases...
-INFO - 11:21:51.734: (e:\users\goat\code\armory3\cppforswig\bdm_server.h:263) Listening on port 59111
-INFO - 11:21:51.734: (e:\users\goat\code\armory3\cppforswig\bitcoinp2p.cpp:947) Connected to Bitcoin node
-INFO - 11:21:51.062: (e:\users\goat\code\armory3\cppforswig\noderpc.cpp:57) RPC connection established
-INFO - 11:21:51.062: (e:\users\goat\code\armory3\cppforswig\blockdatamanagerconfig.cpp:919) waiting on node sync: 99.9998%
-INFO - 11:21:51.078: (e:\users\goat\code\armory3\cppforswig\noderpc.cpp:425) Node is ready
-INFO - 11:21:51.078: (e:\users\goat\code\armory3\cppforswig\blockutils.cpp:1108) Executing: doInitialSyncOnLoad
-INFO - 11:21:51.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:199) Reading headers from db
-WARN - 11:21:51.218: (e:\users\goat\code\armory3\cppforswig\lmdb_wrapper.cpp:1241) No headers in DB yet!
-INFO - 11:21:51.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:238) Found 1 headers in db
-INFO - 11:21:51.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:71) updating HEADERS db
-INFO - 11:21:52.797: (e:\users\goat\code\armory3\cppforswig\bdm_server.cpp:1121) registered bdv: ae3e5bb38b7e83f01b1b
-INFO - 11:21:55.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #4
-INFO - 11:21:55.328: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #6
-INFO - 11:21:56.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #7
-INFO - 11:21:59.359: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #12
-INFO - 11:21:59.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #13
-INFO - 11:22:00.843: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #14
-INFO - 11:22:00.125: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #15
-INFO - 11:22:03.531: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #20
-INFO - 11:22:03.578: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #21
-INFO - 11:22:04.297: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #22
-INFO - 11:22:04.437: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #23
-INFO - 11:22:07.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #29
-INFO - 11:22:08.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #30
-INFO - 11:22:09.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #31
-INFO - 11:22:11.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #37
-INFO - 11:22:13.156: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #39
-INFO - 11:22:15.375: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #45
-INFO - 11:22:17.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #47
-INFO - 11:22:19.187: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #53
-INFO - 11:22:22.109: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #54
-INFO - 11:22:22.234: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #55
-INFO - 11:22:23.984: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #61
-INFO - 11:22:26.140: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #62
-INFO - 11:22:26.203: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #63
-INFO - 11:22:27.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #69
-INFO - 11:22:30.984: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #70
-INFO - 11:22:30.047: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #71
-INFO - 11:22:31.781: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #77
-INFO - 11:22:34.062: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #78
-INFO - 11:22:34.172: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #79
-INFO - 11:22:35.765: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #85
-INFO - 11:22:38.047: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #86
-INFO - 11:22:38.125: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #87
-INFO - 11:22:38.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #93
-INFO - 11:22:42.890: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #94
-INFO - 11:22:42.000: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #95
-INFO - 11:22:42.343: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #101
-INFO - 11:22:46.015: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #102
-INFO - 11:22:46.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #103
-INFO - 11:22:46.187: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #109
-INFO - 11:22:50.765: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #117
-INFO - 11:22:53.312: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #125
-INFO - 11:22:57.843: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #133
-INFO - 11:23:00.328: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #141
-INFO - 11:23:04.968: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #149
-INFO - 11:23:07.547: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #157
-INFO - 11:23:11.031: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #165
-INFO - 11:23:14.484: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #173
-INFO - 11:23:18.937: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #181
-INFO - 11:23:21.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #189
-INFO - 11:23:25.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #197
-INFO - 11:23:28.343: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #205
-INFO - 11:23:32.000: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #213
-ERROR - 11:23:33.297: (e:\users\goat\code\armory3\cppforswig\bitcoinp2p.cpp:1037) caught StopBlockingLoop in processDataStackThread
-INFO - 11:23:33.297: (e:\users\goat\code\armory3\cppforswig\bitcoinp2p.cpp:969) Disconnected from Bitcoin node
-INFO - 11:23:35.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #221
-INFO - 11:23:39.078: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #229
-INFO - 11:23:42.422: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #237
-INFO - 11:23:46.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #245
-INFO - 11:23:49.468: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #253
-INFO - 11:23:53.906: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #261
-INFO - 11:23:56.343: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #269
-INFO - 11:23:58.875: (e:\users\goat\code\armory3\cppforswig\bdm_server.cpp:1121) registered bdv: 7a11e6b86a45ff77a2ed
-INFO - 11:24:00.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #277
-INFO - 11:24:04.750: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #285
-INFO - 11:24:07.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #293
-INFO - 11:24:11.672: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #301
-INFO - 11:24:14.953: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #309
-INFO - 11:24:18.656: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #317
-INFO - 11:24:21.406: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #325
-INFO - 11:24:24.593: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #333
-INFO - 11:24:28.297: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #341
-INFO - 11:24:31.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #349
-INFO - 11:24:35.047: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #357
-INFO - 11:24:38.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #365
-INFO - 11:24:42.500: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #373
-INFO - 11:24:46.156: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #381
-INFO - 11:24:50.156: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #389
-INFO - 11:24:54.968: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #397
-INFO - 11:24:57.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #405
-ERROR - 11:25:00.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:366) block deser except:
-ERROR - 11:25:00.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:367) block fileID: 412
-INFO - 11:25:00.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:493) Found next block after skipping 909384bytes
-INFO - 11:25:01.328: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #413
-INFO - 11:25:05.750: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #421
-INFO - 11:25:09.750: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #429
-INFO - 11:25:12.250: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #437
-INFO - 11:25:16.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #445
-INFO - 11:25:20.672: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #453
-INFO - 11:25:23.125: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #461
-INFO - 11:25:27.953: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #469
-INFO - 11:25:30.625: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #477
-INFO - 11:25:34.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #485
-INFO - 11:25:38.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #493
-INFO - 11:25:42.781: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #501
-INFO - 11:25:44.890: (e:\users\goat\code\armory3\cppforswig\bitcoinp2p.cpp:947) Connected to Bitcoin node
-INFO - 11:25:45.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #509
-INFO - 11:25:49.812: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #517
-INFO - 11:25:52.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #525
-INFO - 11:25:56.172: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #533
-INFO - 11:26:00.812: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #541
-INFO - 11:26:03.422: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #549
-INFO - 11:26:07.140: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #557
-INFO - 11:26:11.718: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #565
-INFO - 11:26:14.047: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #573
-INFO - 11:26:18.750: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #581
-INFO - 11:26:21.406: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #589
-INFO - 11:26:25.984: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #597
-INFO - 11:26:28.593: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #605
-INFO - 11:26:32.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #613
-INFO - 11:26:36.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #621
-INFO - 11:26:39.359: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #629
-INFO - 11:26:43.109: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #637
-INFO - 11:26:47.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #645
-INFO - 11:26:50.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #653
-INFO - 11:26:54.875: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #661
-INFO - 11:26:58.656: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #669
-INFO - 11:27:01.343: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #677
-INFO - 11:27:05.187: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #685
-INFO - 11:27:09.015: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #693
-INFO - 11:27:13.734: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #701
-INFO - 11:27:16.562: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #709
-INFO - 11:27:20.234: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #717
-INFO - 11:27:24.890: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #725
-INFO - 11:27:27.312: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #733
-INFO - 11:27:31.968: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #741
-INFO - 11:27:34.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #749
-INFO - 11:27:38.953: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #757
-INFO - 11:27:42.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #765
-INFO - 11:27:46.656: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #773
-INFO - 11:27:49.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #781
-INFO - 11:27:53.203: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #789
-INFO - 11:27:57.718: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #797
-INFO - 11:28:00.187: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #805
-INFO - 11:28:04.672: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #813
-INFO - 11:28:07.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #821
-INFO - 11:28:10.578: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #829
-INFO - 11:28:14.937: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #837
-INFO - 11:28:17.406: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #845
-INFO - 11:28:21.000: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #853
-INFO - 11:28:25.656: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #861
-INFO - 11:28:28.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #869
-INFO - 11:28:32.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #877
-INFO - 11:28:36.828: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #885
-INFO - 11:28:39.203: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #893
-INFO - 11:28:43.797: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #901
-INFO - 11:28:46.375: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #909
-INFO - 11:28:50.031: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #917
-INFO - 11:28:53.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #925
-INFO - 11:28:57.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #933
-INFO - 11:29:01.656: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #941
-INFO - 11:29:04.156: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #949
-INFO - 11:29:07.531: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #957
-INFO - 11:29:11.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #965
-INFO - 11:29:14.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #973
-INFO - 11:29:18.062: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #981
-INFO - 11:29:22.765: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #989
-INFO - 11:29:25.375: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #997
-INFO - 11:29:29.093: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1005
-INFO - 11:29:33.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1013
-INFO - 11:29:36.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1021
-INFO - 11:29:40.890: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1029
-INFO - 11:29:43.250: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1037
-INFO - 11:29:47.078: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1045
-INFO - 11:29:50.547: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1053
-INFO - 11:29:54.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1061
-INFO - 11:29:58.843: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1069
-INFO - 11:30:01.468: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1077
-INFO - 11:30:05.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1085
-INFO - 11:30:08.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1093
-INFO - 11:30:12.468: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1101
-INFO - 11:30:16.484: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1109
-INFO - 11:30:20.937: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1117
-INFO - 11:30:24.875: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1125
-INFO - 11:30:27.484: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1133
-INFO - 11:30:31.109: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1141
-INFO - 11:30:34.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1149
-INFO - 11:30:37.890: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1157
-INFO - 11:30:40.781: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1165
-INFO - 11:30:43.828: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1173
-INFO - 11:30:46.781: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1181
-INFO - 11:30:48.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1189
-INFO - 11:30:51.359: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1197
-INFO - 11:30:54.359: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1205
-INFO - 11:30:58.703: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1213
-INFO - 11:31:01.359: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1221
-INFO - 11:31:04.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1229
-INFO - 11:31:08.125: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1237
-INFO - 11:31:11.437: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1245
-INFO - 11:31:15.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1253
-INFO - 11:31:18.343: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1261
-INFO - 11:31:22.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1269
-INFO - 11:31:25.718: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1277
-INFO - 11:31:28.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1285
-INFO - 11:31:31.562: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1293
-INFO - 11:31:34.515: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1301
-INFO - 11:31:38.640: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1309
-INFO - 11:31:41.797: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1317
-INFO - 11:31:44.062: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1325
-INFO - 11:31:47.578: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1333
-INFO - 11:31:51.031: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1341
-INFO - 11:31:54.484: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1349
-INFO - 11:31:58.000: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1357
-INFO - 11:32:01.437: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1365
-INFO - 11:32:05.140: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1373
-INFO - 11:32:09.750: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1381
-INFO - 11:32:12.406: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1389
-INFO - 11:32:16.718: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1397
-INFO - 11:32:19.250: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1405
-INFO - 11:32:23.906: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1413
-INFO - 11:32:26.390: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1421
-INFO - 11:32:30.015: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1429
-INFO - 11:32:33.437: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1437
-INFO - 11:32:37.031: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1445
-INFO - 11:32:40.484: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1453
-INFO - 11:32:44.062: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1461
-INFO - 11:32:47.562: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1469
-INFO - 11:32:51.203: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1477
-INFO - 11:32:55.922: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1485
-INFO - 11:32:59.781: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1493
-INFO - 11:33:03.640: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1501
-INFO - 11:33:06.328: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1509
-INFO - 11:33:10.218: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1517
-INFO - 11:33:13.375: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1525
-INFO - 11:33:17.984: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1533
-INFO - 11:33:20.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1541
-INFO - 11:33:24.203: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1549
-INFO - 11:33:28.859: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1557
-INFO - 11:33:31.609: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1565
-INFO - 11:33:36.687: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1573
-INFO - 11:33:39.562: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1581
-INFO - 11:33:43.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1589
-INFO - 11:33:47.453: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1597
-INFO - 11:33:51.406: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1605
-INFO - 11:33:55.015: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1613
-INFO - 11:33:59.968: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1621
-INFO - 11:34:03.687: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1629
-INFO - 11:34:06.281: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1637
-INFO - 11:34:10.890: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1645
-INFO - 11:34:14.797: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1653
-INFO - 11:34:17.297: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1661
-INFO - 11:34:21.906: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1669
-INFO - 11:34:24.578: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1677
-INFO - 11:34:28.234: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1685
-INFO - 11:34:32.843: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1693
-INFO - 11:34:53.718: (e:\users\goat\code\armory3\cppforswig\databasebuilder.cpp:281) parsed block file #1695
-INFO - 11:35:02.078: (e:\users\goat\code\armory3\cppforswig\blockchain.cpp:248) Organizing chain

HCP

legendary

Activity: 2086

Merit: 4363

Quote from: walkingaround on June 24, 2019, 01:14:18 PM

Hi! Good to see that there's always new improvements to Armory. I have a question: does Ver. 0.96.5 work together with Bitcoin Core 0.18.0? I can't get it running on Windows 10 pro 64 bit.

Am I doing something wrong, or does Armory 0.96.5 require lower versions of Bitcoin core?

I'm currently using Windows 10 PRO x64 + Bitcoin Core 0.18.0 + Armory 0.96.5 and it all works fine.

Can you please clarify exactly what you mean by "can't get it running". Does Armory start? Does it attempt to build the database? Is is just showing as "offline"? Is it not correctly updating the number of blocks? Huh

Also, if you haven't already tried... a very simple thing to try is simply rebooting the PC, it's possible there are "ghost" ArmoryDB processes running in the background preventing Armory from running properly.

But, in all honesty, your best bet is to do as Carlton Banks already suggested and post your logs. Both the armorylog.txt and dbLog.txt.

PhoenixFire

member

Activity: 270

Merit: 36

Quote from: walkingaround on June 24, 2019, 01:14:18 PM

Hi! Good to see that there's always new improvements to Armory. I have a question: does Ver. 0.96.5 work together with Bitcoin Core 0.18.0? I can't get it running on Windows 10 pro 64 bit. Since some days ago, I used Ver. 0.96.0 with many different Bitcoin core versions and all worked fine, but 0.96.5 doesn't work with 0.18.0 - I tried already all recommended pathing settings etc., but I can't get it running.

Am I doing something wrong, or does Armory 0.96.5 require lower versions of Bitcoin core?

Thank you, regards

0.18.0 and 0.96.5 function fine on my Win 10 testing VM.
Have you tried clearing the Armory database after upgrading from 0.96?
If yes, make a thread

Carlton Banks

legendary

Activity: 3430

Merit: 3080

Quote from: walkingaround on June 24, 2019, 01:14:18 PM

does Ver. 0.96.5 work together with Bitcoin Core 0.18.0?

I tested them together on Linux a few months ago, all seemed ok (pretty quick superficial test though). I'm not using 0.18 with Armory now though (0.18 eats your CPU if you use it together with Tor :/ )

"Post your logs" is what someone will eventually say

walkingaround

newbie

Activity: 4

Merit: 2

Hi! Good to see that there's always new improvements to Armory. I have a question: does Ver. 0.96.5 work together with Bitcoin Core 0.18.0? I can't get it running on Windows 10 pro 64 bit. Since some days ago, I used Ver. 0.96.0 with many different Bitcoin core versions and all worked fine, but 0.96.5 doesn't work with 0.18.0 - I tried already all recommended pathing settings etc., but I can't get it running.

Am I doing something wrong, or does Armory 0.96.5 require lower versions of Bitcoin core?

Thank you, regards

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Quote from: naska21 on April 29, 2019, 01:24:44 AM

Quote from: goatpig on December 24, 2018, 03:59:21 AM

snip

Thank you, goatpig, for updating Armory. Regarding this I have question whether it has an option to transfer offline transaction from/to cold wallet via QR code? If not, will such option contain in future releases?

No this feature is not available in Armory. It has been requested before, and I think it's a good feature to have. I believe having hardware wallet support comes first however, but depending on how easy it is to implement, I can add it in the next major release.

naska21

hero member

Activity: 1358

Merit: 635

Quote from: goatpig on December 24, 2018, 03:59:21 AM

snip

Thank you, goatpig, for updating Armory. Regarding this I have question whether it has an option to transfer offline transaction from/to cold wallet via QR code? If not, will such option contain in future releases?

droark

sr. member

Activity: 525

Merit: 282

While I can't speak for goatpig, I believe the following will be present in 0.97. Some of this is nerd stuff. Don't worry if this makes no sense to you. Wink

- Upgraded wallets (finally!) with full SegWit support and some other features. (Of course, people who wish to stick to their old wallets may do so. They just won't get access to the new features.)
- FCGI is being replaced with WebSockets, which is much more stable.
- Proper supernode support. People who wish to connect to Armory remotely will be able to do so via WebSockets. If it helps, think of it as being a bit like one of those block explorers, only you can send transactions and quickly resolve transactions that you throw at it. (You will need a powerful server for this, mind you.)
- Support for BIP 150 and 151. (Granted, Jonas is deprecating them in favor of a new standard.) This can be used in conjunction with WebSockets to establish a secure connection without relying on TLS.
- Moving from an ancient version of Crypto++ to libsecp256k1 (via libbtc) for crypto functionality.
- Better build system, partially in prep for a move to Python 3 and Qt 5 (required for many reasons).
- Replace SWIG with cppyy.
- More unit tests, to ensure that nothing breaks.
- Better documentation.
- Some code cleanup to get rid of a ton of compiler warnings.

There's probably more that I forgot. This is the gist of what's in there right now, or should be in there very soon.

Regarding Python 3 and Qt 5, this is a much-delayed thing we've been meaning to do for ages, especially since Qt 4 has been unsupported for ages and probably won't even run on the next version of macOS (out in ~6 months or so). We have somebody helping in their free time but I won't complain if others want to jump in and make things happen more quickly.

As for the timeframe, Q2 is still the target, but we'll see. Things keep coming up.

johnlu

sr. member

Activity: 471

Merit: 252

Quote from: goatpig on December 24, 2018, 03:59:21 AM

Most likely the last update before 0.97, sometimes for Q2 2019.

What will be new features in 0.97?

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Quote from: Cassiel on January 25, 2019, 06:58:30 AM

Thanks goatpig.

Quick bug report, it still defaults to the wrong path on install (32bit, rather than 64bit). Been a bug for a number of releases now, very annoying if you don't remember to change it!

It's somewhere in the NSIS settings, I never remember to update that =(

Cassiel

newbie

Activity: 11

Merit: 0

Thanks goatpig.

Quick bug report, it still defaults to the wrong path on install (32bit, rather than 64bit). Been a bug for a number of releases now, very annoying if you don't remember to change it!

bitpop

legendary

Activity: 2912

Merit: 1060

Merry Christmas 🎄🎅🎁

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Another point release with some bug fixes and the ability to spend to bech32 addresses. Most likely the last update before 0.97, sometimes for Q2 2019.

Changelog

Quote

== Added ==
- You can now set the database path from the Settings menu.
- You can now spend to bech32 addresses.
- Added support for satoshi-port CLI argument in ArmoryDB.
- Break backwards compatibility for unsigned transactions carrying bech32 outputs.
Older versions cannot make sense of bech32 addresses, therefor they shouldn't
be able to sign the tx at all.

== Fixes ==
- Improved bitcoind path detection.
- Properly carry thread-count and ram-usage command line arguments from client to automated db process.
- Custom paths set in the GUI will now properly overrule custom paths from armoryqt.conf.
- Fixed spending from lockboxes.
- Fixed deleting lockboxes.
- Fixed Simulfund promisory note creation and signing.
- Fixed preview dialog for unconfirmed transactions.
- Fixed previewing unsigned transactions in offline mode.
- Properly detect output script type when filtering UTXOs.
- Use relevant config files with testnet/regtest modes.
- Properly display bech32 address strings in transaction system tray notification.
- Fix signing transactions with OP_RETURN outputs.
- Fix passing satoshi-port argument through ArmoryQt to auto-managed ArmoryDB.

- Fixed SecurePrint decryption on Windows.
- Recent updates to the MSVC compiler resulted in invalid decryption of AES-CBC packets. This issue only
affects the decryption of SecurePrint encrypted backups. Encryption still operates as expected, no
SecurePrint backups created with the incriminated builds are faulty. Wallets are not concerned, as they
use AES-CFB.

The solution was to turn off all optimizations in MSVC when buidling CryptoPP. This may impact DB boostrapping
performance.

This issue affects all Windows builds of 0.96.4.

== Misc ==
- Use blockstream.info instead of blockchain.info as the external block explorer link.

Binaries
https://github.com/goatpig/BitcoinArmory/releases/tag/v0.96.5

Happy holidays!

Topic: Armory 0.96.5 - page 7. (Read 57016 times)