Quote
In fact, they have the highest percentage of orphaned blocks of any pool (over 50% of the last 70 orphans were AM)
Topic: ASICMINER: Entering the Future of ASIC Mining by Inventing It - page 820. (Read 3917468 times)
Where am I able to confirm this.....
People on reddit are complaining because of the low transaction count in ASICMiner blocks:
http://www.reddit.com/r/Bitcoin/comments/1jd525/why_is_asicminer_including_only_40_transactions/
Can the chinese firewall be the problem? It would be good if this problem could be fixed
http://www.reddit.com/r/Bitcoin/comments/1jd525/why_is_asicminer_including_only_40_transactions/
Can the chinese firewall be the problem? It would be good if this problem could be fixed
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
so, when will blades be for sale?
we're 1 month late on this (you initially said late June), and I think we'd all appreciate some information on what is the holdup on these blades and when we can expect it them to be ready.
Whoa, calm down there. If there are delays, then there are logistical reasons why that's the case. If friedcat needs to reveal why, he'll do so at the according time. No need to get rowdy.
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
so, when will blades be for sale?
we're 1 month late on this (you initially said late June), and I think we'd all appreciate some information on what is the holdup on these blades and when we can expect it them to be ready.
BLASPHEMY! Friedcat is a GOD and can be as late as he wants, without any updates! His urine is made of GOLD and you should feel HONORED to even have the privilege of mentioning his name!
You must now repent your sins and proceed to kill 20 neighborhood dogs, and then MAYBE Friedcat will forgive you for your heresy! We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
so, when will blades be for sale?
we're 1 month late on this (you initially said late June), and I think we'd all appreciate some information on what is the holdup on these blades and when we can expect it them to be ready.
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
Thanks for the clarification Friedcat don't worry we all love ya keep up the excellent work <3
Friedcat continues to be awesome one more time.
If he were to do another IPO I would put 90% of my BTC into it. Without thinking twice.
Without a doubt.
It's a shame that when 3rd parties get involved (like this preorder debacle) that things can get so screwed up.
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
fried cat is best cat
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
Whoops! Probably should learn to read Chinese before I make an ass of myself again XD
We of course don't accept pre-orders.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
What we would like to make clear is that this pre-order was not initiated by rockxie himself.
Friedcat continues to be awesome one more time.
If he were to do another IPO I would put 90% of my BTC into it. Without thinking twice.
Friedcat continues to be awesome one more time.
Yeay! Rockxie learned his lesson with pre-orders, called that one a while ago... now if he could only take another page out of the friedcat play book for success and NOT RELEASE INFORMATION TILL THINGS ARE READY!!!
These distributes really should just sit back and take their margin and be happy! Why put yourself through all this extra mess?!! Why deviate from what makes ASICMINER different!
These distributes really should just sit back and take their margin and be happy! Why put yourself through all this extra mess?!! Why deviate from what makes ASICMINER different!
9 承诺：我们再也不他妈的搞预售了。。。。。 Cry
lol @google translate: Quote
9 commitment: We no longer engage in pre-fuck up. . . . . Cry
3. no more blade pre-sale, and we will never do it again (friedcat does not agree with the pre-sale, it's distributor's own decision)
I completely agree with this! Thanks friedcat for no more F*****G pre-orders.
3. no more blade pre-sale, and we will never do it again (friedcat does not agree with the pre-sale, it's distributor's own decision)
I completely agree with this! Thanks friedcat for no more F*****G pre-orders.
3. no more blade pre-sale, and we will never do it again (friedcat does not agree with the pre-sale, it's distributor's own decision)
I completely agree with this! Thanks friedcat for no more F*****G pre-orders.
here you are: https://bitcointalksearch.org/topic/--264754
1 因新刀片还有一点问题需要解决，工厂暂时无法如期交货，新刀片出货将继续延迟。
2 前面预售的订单如期发货，不过产品改为用10G的老版本刀片替代(全新未拆封 刚刚从工厂出来)，可以稳定超频到12.5G以上，电压和散热好可以接近13G。(新刀片无法超频)
另外，为了回馈和补偿预定客户，降价3BTC，也就是15.88BTC/台，所有已经预订的客户，将会把多出来的部分BTC在发货当天退回，请联系各自购买的代理。
3 刀片预售停止，并且以后也不再预售。（实际上这次预售烤猫并不赞同，完全是代理行为。）
4 该刀片产品规格参数与以前的老刀片产品一致，有着成熟稳定的技术，但本身不配有电源和风扇，请自行准备，具体说明请咨询代理。
5 5G订单拥有转12.8G刀片名额，也可以选择退款，详细情况请咨询各自代理。
6 新刀片(10G/5G)的发货日期和价格还未确定，请关注官方公告。
7 预售订单发货日期为8月3号之前。
8 为了更好地获得售后服务，请认准官方授权代理。http://ttbit.sinaapp.com/t/41
9 承诺：我们再也不他妈的搞预售了。。。。。 Cry
From the link given, doing my translation
1. new blade still has some issues, the factory cannot deliver on time
2. pre-orders will be filled with 10G old blade (brand new, un-opened, fresh off the production line), stable when OC to 12.G. With good voltage and cooling, it can run at 13G (new blade cannot be OC)
to compensate, there will be a rebate of 3 BTC, rebate will be paid out when machines are mailed
3. no more blade pre-sale, and we will never do it again (friedcat does not agree with the pre-sale, it's distributor's own decision)
4. the substitute blades will be same as the old blades, with mature process, but does not come with power-supply or fan, buyer are responsible for those, for info, contact your distributor
5. there's quota for those with 5G mini-blade order to switch to 12.8G blades (I suppose this is the old blade). Buyer can request refunds. Please contact your distributor
6. no ETA or price to the new blades
7. pre-orders will be sent by Aug 3
8. for better after-sale support, only buy from licensed distributor
9. Promise: We'll never have another fxxxing pre-sale
1 因新刀片还有一点问题需要解决，工厂暂时无法如期交货，新刀片出货将继续延迟。
2 前面预售的订单如期发货，不过产品改为用10G的老版本刀片替代(全新未拆封 刚刚从工厂出来)，可以稳定超频到12.5G以上，电压和散热好可以接近13G。(新刀片无法超频)
另外，为了回馈和补偿预定客户，降价3BTC，也就是15.88BTC/台，所有已经预订的客户，将会把多出来的部分BTC在发货当天退回，请联系各自购买的代理。
3 刀片预售停止，并且以后也不再预售。（实际上这次预售烤猫并不赞同，完全是代理行为。）
4 该刀片产品规格参数与以前的老刀片产品一致，有着成熟稳定的技术，但本身不配有电源和风扇，请自行准备，具体说明请咨询代理。
5 5G订单拥有转12.8G刀片名额，也可以选择退款，详细情况请咨询各自代理。
6 新刀片(10G/5G)的发货日期和价格还未确定，请关注官方公告。
7 预售订单发货日期为8月3号之前。
8 为了更好地获得售后服务，请认准官方授权代理。http://ttbit.sinaapp.com/t/41
9 承诺：我们再也不他妈的搞预售了。。。。。 Cry
From the link given, doing my translation
1. new blade still has some issues, the factory cannot deliver on time
2. pre-orders will be filled with 10G old blade (brand new, un-opened, fresh off the production line), stable when OC to 12.G. With good voltage and cooling, it can run at 13G (new blade cannot be OC)
to compensate, there will be a rebate of 3 BTC, rebate will be paid out when machines are mailed
3. no more blade pre-sale, and we will never do it again (friedcat does not agree with the pre-sale, it's distributor's own decision)
4. the substitute blades will be same as the old blades, with mature process, but does not come with power-supply or fan, buyer are responsible for those, for info, contact your distributor
5. there's quota for those with 5G mini-blade order to switch to 12.8G blades (I suppose this is the old blade). Buyer can request refunds. Please contact your distributor
6. no ETA or price to the new blades
7. pre-orders will be sent by Aug 3
8. for better after-sale support, only buy from licensed distributor
9. Promise: We'll never have another fxxxing pre-sale
First of all,the pre-order is rockxie's idea.And,he won't do it any more.Never.Ever.
Indeed, that was really stupid. There is no point to get money in advance if you don't absolutely need this money in order to finish the products. It just brings some risk to look bad, which actually happens now. I hope people will not confuse AM reliability with rockxie's one, even if I doubt it, sadly.
Jump to: