Topic: ASrock H110 Pro BTC+ 13 GPU Board - page 12. (Read 54645 times)
guys i have read some people say it's bad for parts to touch at pci to motherboard connection. is this true? or is it fine if they some times touch?
for me the mainboard works fine hehe 13x rx470/570 2x 1200 watt power supply 13x powered risers molex and sata extended power connected to mb monitor connected to onboard dvi running with simple mining os
guys i try to run 13 gtx 1060 3gb on asrock h110 and Ethos.
Everytime i get more then 8gpu connected my rig crasches..... and ist not the riser, it cant be that all 5 other risers are broken (i checked one by one the last 5 risers) one of them has started but crashed after 10 minutes.
Now ist like the gpu nr 9 which was mining the 10 minutes now won's start
And it was on mem 4000 and pwr 90 = 17,5 so i didnt overclock too much..... (THE first 8GPU was able to work on mem 4400 4 hours with no crashes )..
Problems started when i connected gpu 9 , 10 11, 12 or 13 ........
i have 2x molex + sata power connected
I also made an Isolation betwen risers so they dont touch each other...
what the füc* is wrong with These Mainboards .... ??
please advice !!
Everytime i get more then 8gpu connected my rig crasches..... and ist not the riser, it cant be that all 5 other risers are broken (i checked one by one the last 5 risers) one of them has started but crashed after 10 minutes.
Now ist like the gpu nr 9 which was mining the 10 minutes now won's start
And it was on mem 4000 and pwr 90 = 17,5 so i didnt overclock too much..... (THE first 8GPU was able to work on mem 4400 4 hours with no crashes )..
Problems started when i connected gpu 9 , 10 11, 12 or 13 ........
i have 2x molex + sata power connected
I also made an Isolation betwen risers so they dont touch each other...
what the füc* is wrong with These Mainboards .... ??
please advice !!
Sup Fellow Asrockers I have been playing around with this board for some time now waiting on vendor releases to accommodate 13 cards of the same type.... I have not been successful
I was able to detect 13 cards in win10 but when mining software ran it crashed
I have since split the cards into 2 rigs in waiting for the
I have some questions..... but before I ask I will tell my setup .....
asrock h110BTC pro +
16gb ram at 2400 ddr4
120 GB ssd partitioned win7/win10 ( have tested ubuntu 16.04 NVOC19 and SMOS) want to try ethOS but thats GPUshacked up
13 1070s
Open air frame
Does anyone have any new methods to modify the display port number recognition??
Has anyone used Virtual Machine software to attempt mining
Has anybody gotten a response from Asrock in relation to this motherboard and further releases...?
I was able to detect 13 cards in win10 but when mining software ran it crashed
I have since split the cards into 2 rigs in waiting for the
I have some questions..... but before I ask I will tell my setup .....
asrock h110BTC pro +
16gb ram at 2400 ddr4
120 GB ssd partitioned win7/win10 ( have tested ubuntu 16.04 NVOC19 and SMOS) want to try ethOS but thats GPUshacked up
13 1070s
Open air frame
Does anyone have any new methods to modify the display port number recognition??
Has anyone used Virtual Machine software to attempt mining
Has anybody gotten a response from Asrock in relation to this motherboard and further releases...
?I bought this motherboard but I have a problem, with any remote access software not working with monitor turned off.
How do I fix this problem ?
How do I fix this problem ?
Which OS do you use?
Windows 10
It's no different from any other mb. I'm using RealVNC and if there's no monitor/display dummy connected the resolution will be limited to 640x480, otherwise it's working just fine. .. also it seems that RDP is somehow works better later(it was terrible with accessing gpraphics hw) and there you wont be limited to the VGA size, so you can do some changes to the system from there
hi i'm new to mining.. right now I can use both 6 gtx 1070 and 3 rx 580 using ethos. but when I plug the 4th rx580 ethos won't boot. anybody experience the same problem?
I bought this motherboard but I have a problem, with any remote access software not working with monitor turned off.
How do I fix this problem ?
How do I fix this problem ?
Which OS do you use?
Windows 10
I bought this motherboard but I have a problem, with any remote access software not working with monitor turned off.
How do I fix this problem ?
How do I fix this problem ?
Which OS do you use?
I bought this motherboard but I have a problem, with any remote access software not working with monitor turned off.
How do I fix this problem ?
How do I fix this problem ?
2) do you have any substance to the shorting claim? cause I'm yet to find one pair touching each other(though maybe its just good soldering), but the main point is: it seems that the biggest bumps are the ground.
No, i dont have first hand experience, like i said i used electrical tape to insulate just to be sure, but i read it somewhere. Someone complained this scenario happened to him.
That its why i mention it as a possibility.
How do you guys overcoming the PCI-E Slot blocking Issue? the Standart Riser blocks the next slot, are there special riser out?
They do not block the next slot, what riser do you have? Here is picture from crypotminig blog:
How do you guys overcoming the PCI-E Slot blocking Issue? the Standart Riser blocks the next slot, are there special riser out?
I mean when i plug in on mobo only 10 gpu-s. All 10 works without problem, but when i add 11th gpu and start rig , rig sometimes start only 9 gpu , 7 gpu, sometimes 11. I try EtOS and SMOS...its same
I read somewhere that these could be os problems, try pimp
I'm sorry, what exactly did you change? Did you used the molex or not? When i read your writing is kinda confusing to understand.
One of the reasons can be that your risers are shorting. On that mobo they are very close and sometimes can touch and short each other. I use electrical tape to insulate them and have no problems.
2) do you have any substance to the shorting claim? cause I'm yet to find one pair touching each other(though maybe its just good soldering), but the main point is: it seems that the biggest bumps are the ground.
I just got this board, but i'm kinda confused.
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
You don't need to use the 4-pin molex PCI-E supplemental power when using all powered USB risers. There is only a small 3.3V draw from the PCI-E slot to the riser through the USB cable.
That's exactly what I thought, however during building one of those(see below 2 winx workers) last week I've experienced some really weird issues (don't remember if MB wouldn't POST or something) the warning was disabled on both and the only difference was that one had molex connected to the board and another one didn't, so I changed that... and the issue was gone.
P.S. Of course it could be a coincidence and I'm just being a superstitious ghm... whatever. but I'm not willing to spend time testing and disproving myself. so... as always the choice is yours:)
I'm sorry, what exactly did you change? Did you used the molex or not? When i read your writing is kinda confusing to understand.
Hi , i need help from you . I have ASrock H110 Pro BTC+ and 13 gpu (6rx580 Saphire nitro ,4x Asaus \Strix rx 580 8 gb and 3x Asusu strix rx 570 4 gb) and only 10 gpu work for me, when i plug in 11th and start rig, rig recognizes sometimes 8,sometimes 7 gpu, sometimes 11 gpu...when i try plug in all 13 gpus its same thing, rig sometimes recognizes..8 gpu, sometimes 12...and very rare (after 20 restars ) recognizes all 13 gpu. I have only 4 gb ram memory. Sorry for bad English, i hope you understund me and can help me.
One of the reasons can be that your risers are shorting. On that mobo they are very close and sometimes can touch and short each other. I use electrical tape to insulate them and have no problems.
Other reason can be a bad raiser, try to test them one by one.
And final suggestion is to test it with 8gb ram.
Hi , i need help from you . I have ASrock H110 Pro BTC+ and 13 gpu (6rx580 Saphire nitro ,4x Asaus \Strix rx 580 8 gb and 3x Asusu strix rx 570 4 gb) and only 10 gpu work for me, when i plug in 11th and start rig, rig recognizes sometimes 8,sometimes 7 gpu, sometimes 11 gpu...when i try plug in all 13 gpus its same thing, rig sometimes recognizes..8 gpu, sometimes 12...and very rare (after 20 restars ) recognizes all 13 gpu. I have only 4 gb ram memory. Sorry for bad English, i hope you understund me and can help me.
What ido you mean by "rig recognizes", what is the operating system that you use?
I mean when i plug in on mobo only 10 gpu-s. All 10 works without problem, but when i add 11th gpu and start rig , rig sometimes start only 9 gpu , 7 gpu, sometimes 11. I try EtOS and SMOS...its same
Hi , i need help from you . I have ASrock H110 Pro BTC+ and 13 gpu (6rx580 Saphire nitro ,4x Asaus \Strix rx 580 8 gb and 3x Asusu strix rx 570 4 gb) and only 10 gpu work for me, when i plug in 11th and start rig, rig recognizes sometimes 8,sometimes 7 gpu, sometimes 11 gpu...when i try plug in all 13 gpus its same thing, rig sometimes recognizes..8 gpu, sometimes 12...and very rare (after 20 restars ) recognizes all 13 gpu. I have only 4 gb ram memory. Sorry for bad English, i hope you understund me and can help me.
What ido you mean by "rig recognizes", what is the operating system that you use?
I just got this board, but i'm kinda confused.
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
You don't need to use the 4-pin molex PCI-E supplemental power when using all powered USB risers. There is only a small 3.3V draw from the PCI-E slot to the riser through the USB cable.
That's exactly what I thought, however during building one of those(see below 2 winx workers) last week I've experienced some really weird issues (don't remember if MB wouldn't POST or something) the warning was disabled on both and the only difference was that one had molex connected to the board and another one didn't, so I changed that... and the issue was gone.
P.S. Of course it could be a coincidence and I'm just being a superstitious ghm... whatever. but I'm not willing to spend time testing and disproving myself. so... as always the choice is yours:)
Hi , i need help from you . I have ASrock H110 Pro BTC+ and 13 gpu (6rx580 Saphire nitro ,4x Asaus \Strix rx 580 8 gb and 3x Asusu strix rx 570 4 gb) and only 10 gpu work for me, when i plug in 11th and start rig, rig recognizes sometimes 8,sometimes 7 gpu, sometimes 11 gpu...when i try plug in all 13 gpus its same thing, rig sometimes recognizes..8 gpu, sometimes 12...and very rare (after 20 restars ) recognizes all 13 gpu. I have only 4 gb ram memory. Sorry for bad English, i hope you understund me and can help me.
Thank you kindly for your reply.
I thought that is not necessary, but better ask than sorry.
I also use a single EVGA 1600w power supply so im safe on the mixing PSU's side.
I thought that is not necessary, but better ask than sorry.
I also use a single EVGA 1600w power supply so im safe on the mixing PSU's side.
I just got this board, but i'm kinda confused.
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
You don't need to use the 4-pin molex PCI-E supplemental power when using all powered USB risers. There is only a small 3.3V draw from the PCI-E slot to the riser through the USB cable. You also DEFINITELY SHOULDN'T connect different power sources to the motherboard, otherwise the motherboard will have to fight the different power sources to stabilize the line.
I just got this board, but i'm kinda confused.
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
Is it mandatory to power the 2 molex on the MOBO if you use powered risers?
Jump to: