Nice video..i think i saw it on youtube before when i was looking how to setup my rig..
I have a question though. Has anyone put all 13 AMD cards on this board? Will it run on 13 AMD cards cause asrock's guide has a mix of 7 AMD and 5 Nvidia.
I have 8 AMD cards hooked up on it and im waiting on a cable to plug 2 more. I recently bought another 2 RX580's though for a 2nd rig im planning but i thought in the meanwhile if i could put them all together.
But i want to ask first if anyone else has done it..
thanks
Topic: Asrock H110 Pro btc+ Setup guide (Read 1690 times)
ok, I see everybody making up to 12-13 gpu rigs with this motherboard using 1080ti's or rx4xx/5xx,
But,
has anyone done 8-13 gpu rig with this motherboard using hawaii/fiji cards?
using win 10 v1709 and earlier crimson drivers such as 16.7.3?
But,
has anyone done 8-13 gpu rig with this motherboard using hawaii/fiji cards?
using win 10 v1709 and earlier crimson drivers such as 16.7.3?
I made a pretty well detailed video of a 13 GPU build using the Asrock H110 Pro BTC. It might be useful for some of you guys
https://youtu.be/UWu2d6_bF5M
https://youtu.be/UWu2d6_bF5M
Is it true that ethOS gives you an extra 1-2mhs per card for ethereum?
Not sure about AMD and ETH, but with my nvidia cards and zcash mining ethos gave me more sol/s compared to Windows 10.
Is it true that ethOS gives you an extra 1-2mhs per card for ethereum?
How does it work with this board? Anyone tried that setup yet?
How does it work with this board? Anyone tried that setup yet?
My setup is :
Started building my first mining rig. I have read both this forum and reddit as well as random info all over the internet.
Decided to go with the 13 gpu Asrock mobo and because of availability issues i got 3x psu's instead of 2x more powerfull.
Anyways building and connecting everything wasn't that hard. You need to follow the basic instructions that come with the mobo. I also watched this guy's video on youtube when assembling my rig : https://www.youtube.com/watch?v=B6gB7GYkkiA
Points to watch out for. You have to connect the 2x extra molex connectors on the mobo, to the same PSU that gives power to the mobo+cpu.
Other than that everything else as in the video but here's where MY problem starts
Setup is:
Asrock H110 Pro btc+
8g Ram (2x 4g dimms)
Pentium 4560
10x XFX R580's
3x 850w PSU (platinum)
For now i have only connected 7 cards using 2 psu's. Im waiting for a cable to connect all 10 cards and the 3rd psu.
I setup windows and installed the wrong drivers first. So had to use DDU and reinstall the AMD crimson pack. Now gpu-z and windows device manager sees 6 cards.
I did a bios update but that didnt change anything.
Also when i have my display connected to one of the 580's i CANNOT access bios setting.
If i disconnect all cards and use onboard graphics i can access bios but i get oenly 7 pciE showing in bios.
what gives?
btw using 6x cards with modded bios and AMD mining drivers gives me 30Mh/s on claymore mining Ethereum but i have 10x cards and i need to use them all.
thanks for any help..much appreciated!
Hi, I have experience of mining on such a motherboard. I have three rigs for thirteen cards. Two rig on NVIDIA video cards, and one on am. I'm working on Linux. I think this is the most convenient operating system. There is no glitch like windows, supports thirteen video cards without any problems. I also use a server power supply and I advise you.it is necessary to additionally supply two Molex connectors. Started building my first mining rig. I have read both this forum and reddit as well as random info all over the internet.
Decided to go with the 13 gpu Asrock mobo and because of availability issues i got 3x psu's instead of 2x more powerfull.
Anyways building and connecting everything wasn't that hard. You need to follow the basic instructions that come with the mobo. I also watched this guy's video on youtube when assembling my rig : https://www.youtube.com/watch?v=B6gB7GYkkiA
Points to watch out for. You have to connect the 2x extra molex connectors on the mobo, to the same PSU that gives power to the mobo+cpu.
Other than that everything else as in the video but here's where MY problem starts
Setup is:
Asrock H110 Pro btc+
8g Ram (2x 4g dimms)
Pentium 4560
10x XFX R580's
3x 850w PSU (platinum)
For now i have only connected 7 cards using 2 psu's. Im waiting for a cable to connect all 10 cards and the 3rd psu.
I setup windows and installed the wrong drivers first. So had to use DDU and reinstall the AMD crimson pack. Now gpu-z and windows device manager sees 6 cards.
I did a bios update but that didnt change anything.
Also when i have my display connected to one of the 580's i CANNOT access bios setting.
If i disconnect all cards and use onboard graphics i can access bios but i get oenly 7 pciE showing in bios.
what gives?
btw using 6x cards with modded bios and AMD mining drivers gives me 30Mh/s on claymore mining Ethereum but i have 10x cards and i need to use them all.
thanks for any help..much appreciated!
With the latest updates there is no limitation in number of cards Windows supports. When you assemble your rig start with just ONE card. Install the drivers from scratch and then add the rest of your cards.
I used the 17.11.4 drivers version. Not sure if the same will work for you.
I used the 17.11.4 drivers version. Not sure if the same will work for you.
I have 8 GPU and the new driver have no 8GPU limit
You using 10 GPU card on Windows OS?
I think windows OS give hardware limitation, max 6 card. but i dont know actually, my rig only 5 RX570 with windows 10
I think windows OS give hardware limitation, max 6 card. but i dont know actually, my rig only 5 RX570 with windows 10
Hi,
I have try to install the 17.11.4 versione and the last 18.2.3 but for some GPU I can't change mode from graphic to COMPUTE,
any idea ?
What I can do ?
thx
I have try to install the 17.11.4 versione and the last 18.2.3 but for some GPU I can't change mode from graphic to COMPUTE,
any idea ?
What I can do ?
thx
I have this mobo running 8 cards.
It is true its a pain to setup and logic doesn't apply when configuring it to work with more than 7-8 cards.
What worked for me was using the blockchain drivers. Not the latest ones though. Or 17.11.4 AMD Drivers which will let you use MSI afterburner to change mem and core speed.
Also if you have connected 7-8-9 or 10 cards but it doesn't show some of them try changing the pciE slots. I plugged them in order from 1st to 8th skipping the main pciE.
Im about to connect 2 more cards at some point for a total of 10 but for now i can't tell which slots and in what order the mobo will detect. One thing sure is that you need to use DDU each time you change the drivers.
Also for me the latest version of drivers didn't work because although all cards where detected i COULDN'T use MSI afterburner to change clocks so i only got speeds up to 22-24 in claymores ETH miner.
I have read somewhere that you need a combination of cards for the mobo to run all 13 slots. Ie you need both AMD and Nvidia im not sure if it matters which you need more or if you need mining specific cards as well.
If anyone's got any questions or has any other info feel free to post. I ll keep this thread updated!
It is true its a pain to setup and logic doesn't apply when configuring it to work with more than 7-8 cards.
What worked for me was using the blockchain drivers. Not the latest ones though. Or 17.11.4 AMD Drivers which will let you use MSI afterburner to change mem and core speed.
Also if you have connected 7-8-9 or 10 cards but it doesn't show some of them try changing the pciE slots. I plugged them in order from 1st to 8th skipping the main pciE.
Im about to connect 2 more cards at some point for a total of 10 but for now i can't tell which slots and in what order the mobo will detect. One thing sure is that you need to use DDU each time you change the drivers.
Also for me the latest version of drivers didn't work because although all cards where detected i COULDN'T use MSI afterburner to change clocks so i only got speeds up to 22-24 in claymores ETH miner.
I have read somewhere that you need a combination of cards for the mobo to run all 13 slots. Ie you need both AMD and Nvidia im not sure if it matters which you need more or if you need mining specific cards as well.
If anyone's got any questions or has any other info feel free to post. I ll keep this thread updated!
Hi Guys ,
Can anyone help us what is the issue. My last 2 weeks I tried many things but till now non of them work for me .
I have 11 GPUs 10xRX5xx and 1xRX4xx Card.
Install Windows 10 Pro 1709 ( as per the thread found out 1709 is must to run more then 8 gpus) so download and install
But with AsRock H110 Pro Btc+ I am not fortunate to run 11 gpus.
I tried with latest AMD 18.x driver-7 feb release, I tried 17.11.4 as all mentioning but sometime windows detect 8 cards some times 9 or when I am lucky they detect 10 gpus and after a reboot it again randomly shows 8 or 9 gpus.
Randomly gpu wont get detect on windows at reboot, when I run claymore undetected card fan wont work or sometimes when I reboot 1 or 2 gpus fan keep running wont stop after reboot (mean gpus not detect in windows) . In device manager I can see hiddentr gpu which I delete and restart but still I was not able to see all 11 cards working in windows.
Even when I run 10 gpus in miner after sometimes windows get crash randomly. dont know its windows problem or Mobo riser and touching each other and make the board to reboot.
From last 2 weeks trying to fix my rig crash/reboot , GPUs detection issue but not I am fed up after all changes .
Someone please share there experience if you are running 11 or more GPUs on Windows
Kudo
Can anyone help us what is the issue. My last 2 weeks I tried many things but till now non of them work for me .
I have 11 GPUs 10xRX5xx and 1xRX4xx Card.
Install Windows 10 Pro 1709 ( as per the thread found out 1709 is must to run more then 8 gpus) so download and install
But with AsRock H110 Pro Btc+ I am not fortunate to run 11 gpus.
I tried with latest AMD 18.x driver-7 feb release, I tried 17.11.4 as all mentioning but sometime windows detect 8 cards some times 9 or when I am lucky they detect 10 gpus and after a reboot it again randomly shows 8 or 9 gpus.
Randomly gpu wont get detect on windows at reboot, when I run claymore undetected card fan wont work or sometimes when I reboot 1 or 2 gpus fan keep running wont stop after reboot (mean gpus not detect in windows) . In device manager I can see hiddentr gpu which I delete and restart but still I was not able to see all 11 cards working in windows.
Even when I run 10 gpus in miner after sometimes windows get crash randomly. dont know its windows problem or Mobo riser and touching each other and make the board to reboot.
From last 2 weeks trying to fix my rig crash/reboot , GPUs detection issue but not I am fed up after all changes .
Someone please share there experience if you are running 11 or more GPUs on Windows
Kudo
i still dont get why people use windows unless theyre trying to mine obscure coins.
I could not agree more. Windows is not suitable for mining, its such a pain. Ethos is a way to go.
i have 2 of these boards. im running 12 1080tis on each rig. theyre pulling around 8500sols via smos/dstm. no drivers, no nothing. just plug and play.
i still dont get why people use windows unless theyre trying to mine obscure coins.
Hey man what OS do you use ?i still dont get why people use windows unless theyre trying to mine obscure coins.
We had really many issues here is a short story;
Bought 15 rx 580 8gb. We just can use 5 on each rig. So we bought 3 MOBO 3 Ram and 3 CPU. I really want to get this shit working.. For me it would be a success to get more than 5 to work!! It simply does not recognize the 6th card. When I Plug in it radomly Shows 3-4 cards. At 5 it shows 5.
Which PCI E lanes do you guys use? I use the black one except the long lane.
i have 2 of these boards. im running 12 1080tis on each rig. theyre pulling around 8500sols via smos/dstm. no drivers, no nothing. just plug and play.
i still dont get why people use windows unless theyre trying to mine obscure coins.
i still dont get why people use windows unless theyre trying to mine obscure coins.
Also it wont recognize Intel M.2 SSD's..
It will only not recognize PCI-E M.2 SSDs because theres no pci-e lanes left. You can use a SATA M.2 SSD just fine.
everyone here seems to be getting issues for AMD cards but I can't figure out how to get Windows 10 to recognize more than 6 GTX 1080 ti's.
On the latest Nvidia Drivers, Windows 10 fully updated. Bios only shows 7/12 Pcie's. Windows will only pull up 6 even though I changed all 7 to Gen 1.
Not sure what to try next
On the latest Nvidia Drivers, Windows 10 fully updated. Bios only shows 7/12 Pcie's. Windows will only pull up 6 even though I changed all 7 to Gen 1.
Not sure what to try next
i hace a h110 pro and i solved my problem by updating the bios, its a nice guide for beginners, thank you for your gentle work,
Hi!
Can you tell me which version of motherboard version did you had and on which on did you updated?
I connected 6 AMD cards, all are recognized but only card that is in PCI2 slot (GPU0) is minning above 14Mh that how much I can get with OC, all other cards are running areound 12 MHs. I tried to switch cards and again same situation only card that is in PCI2 slot is minning 14Mh and all other about 12 Mhs.
I tried GPUs on different motherboard and they are able to mine all of them 14MHs simultaneously.
Any advise.
Thank you!
You need to use Windows 10 1709 (Fall Creator Update) and 17.11.4 AMD Drivers and don"t forget to change mode to COMPUTE for all GPU.
...The drivers i am using are 17.30.1029 and there isn't anywhere that i can change the settings to compute as i have read elsewhere.
...
Driver version 17.30 is beta version supporting chainblock. This version does not have that selection.
Hi fellas,
I have Win10 Enterprise up to date.
h110 Pro btc+
5*RX580
3*RX570
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
BIOS settings: Intergrated video = off; All PCIe = 1Gen.
I have only 1 GPU in PCIe2 as using it to connect display.
I have an issue, that not all cards are recognised. Always random.
Usually around 4/5/6.
I tried to use only one 1200W power supply, but usually used two 1000w with a syncroniser.
Please give any clues.
I have Win10 Enterprise up to date.
h110 Pro btc+
5*RX580
3*RX570
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
BIOS settings: Intergrated video = off; All PCIe = 1Gen.
I have only 1 GPU in PCIe2 as using it to connect display.
I have an issue, that not all cards are recognised. Always random.
Usually around 4/5/6.
I tried to use only one 1200W power supply, but usually used two 1000w with a syncroniser.
Please give any clues.
Jump to: