Topic: Asrock H110 Pro btc+ Setup guide - page 3. (Read 1690 times)

For me, max I can get stable only 12 GPU (AMD), can get 13 GPU but 2 last card will get halved hash. For that 12 AMD RX 5xx using 1300-1400w.
1500w PSU I think can go for 1320w max on wall.

i'm going to buy one myself, does it detect all the 13 gpu without doing anything?

i think i can do a 1500 watt-one -cpu build with 12x 1070ti underpowered at 55%-60% tdp, i see no reason to push the gpu at 90-100%, the gain is minimal...

Its easy.
1. Right click windows icon >> device manager >> go to your gpu >> right click GPU >> uninstall >> delete the driver software for this device >> do it for all your GPU.
2. Right click my computer >>  advance system setting >> hardware >> device installation setting >> NO >> save change.
3. Go to safe mode or just do DDU and then restart your PC.
4. Download AMD driver 17.11.4 >> you can search it on google and then install it.
4xxx >> I forgot this step >> IMPORTANT STEP if using mod bios >> run amd/ati pixel clock patcher.
5. Restart PC >> go to amd setting >> gaming >> global setting >> change mode from graphic to COMPUTE >> do it to all your GPU.
6. Restart PC again and then start mining.

Hello

Yes i am using the latest windows version. Updated and everything. Version 1709.
The drivers i am using are 17.30.1029 and there isn't anywhere that i can change the settings to compute as i have read elsewhere.

I have flashed all of my 6x cards that windows detected using AtiFlash and a modded bios version specifically for my card.
Windows wasn't detecting the 7th card with stock bios either.

https://i.imgur.com/QaeIxsq.jpg

this is what i see in the bios when i log in. btw i can only log in to bios when my screen is connected to the onboard graphics.

About the noob question above. No the mobo DOES NOT come with a heatsink for your cpu. You get the stock heatsink packaged with the cpu unless you buy a tray version.

Where is your sense of adventure! 

Perhaps we should start with building a simple computer with one graphics card first, before dropping $6k on parts we don't know how to use?

Ahh, ok. Thanks.

Usually it comes with one processor (even you buy tray processor, in my country it come with cpu heatsink, boxed always come with it). But for better, ask the seller.

Are you saying it comes with one or I need to buy one separately?

Of course you got that CPU heatsink if buying processor.

I just ordered this one too. Noob question, does it come with the cpu heat sink or is that something extra I need to buy? Again..I am a NOOB!

You need to use Windows 10 1709 (Fall Creator Update) and 17.11.4 AMD Drivers and don"t forget to change mode to COMPUTE for all GPU.

My setup is :
Started building my first mining rig. I have read both this forum and reddit as well as random info all over the internet.

Decided to go with the 13 gpu Asrock mobo and because of availability issues i got 3x psu's instead of 2x more powerfull.
Anyways building and connecting everything wasn't that hard. You need to follow the basic instructions that come with the mobo. I also watched this guy's video on youtube when assembling my rig : https://www.youtube.com/watch?v=B6gB7GYkkiA

Points to watch out for. You have to connect the 2x extra molex connectors on the mobo, to the same PSU that gives power to the mobo+cpu.

Other than that everything else as in the video but here's where MY problem starts

Setup is:

Asrock H110 Pro btc+
8g Ram (2x 4g dimms)
Pentium 4560
10x XFX R580's
3x 850w PSU (platinum)

For now i have only connected 7 cards using 2 psu's. Im waiting for a cable to connect all 10 cards and the 3rd psu.

I setup windows and installed the wrong drivers first. So had to use DDU and reinstall the AMD crimson pack. Now gpu-z and windows device manager sees 6 cards.
I did a bios update but that didnt change anything.
Also when i have my display connected to one of the 580's i CANNOT access bios setting.
If i disconnect all cards and use onboard graphics i can access bios but i get oenly 7 pciE showing in bios.

what gives?

btw using 6x cards with modded bios and AMD mining drivers gives me 30Mh/s on claymore mining Ethereum but i have 10x cards and i need to use them all.

thanks for any help..much appreciated!