Topic: Asrock H110 Pro btc+ Setup guide - page 2. (Read 1690 times)

Hi Everyone,

Has anyone got any advice on getting a rig with this mobo to run over wifi? 

Can anyone share any tips/advice please?

Many thanks,

Fiorano

watching this thread ,thanks

Yo, it will be like that, cause AMD software is shit. Change all to compute mode, it will restart after each change, but sometime it stay graphic (only visual) just go to next GPU. After you change it all, restart computer, and recheck again if there is still that not compute mode, change it again and then restart again, after that start mining.
Remember, you need to restart pc after change it to compute mode.

I tried to change to compute from graphic and seems not working on my card, Im using mixed brand of rx 570 4gb, MSI Gaming x, Aorus, Sapphire nitro+ rx570 8gb but when i change to compute the radeon restarted but when i looked again, there is no changes in some of my cards, yes I do it repeatedly in every card 1 by 1.. And tried also the 17.11.4 but I can't see any differences, I go back to the latest of adrenaline.

I don't use AB/Trixx, I just mod gpu bios.

i hace a h110 pro and i solved my problem by updating the bios, its a nice guide for beginners, thank you for your gentle work,

well rule isn't that true you can see 1600+ on the corsair link

I can confirm this. Running 10 RX580s on win10 with drivers 17.11.4 without problems.

@Bakhtra
Can you give me your settings in afterburner if you are using this? afterburner not working for me as it does not recognize more than 8 GPUs and its not working with driver 17.11.4. Hence I am using TRIXX instead (similar tool from Sapphire instead of MSI afterburner).

Blockchain driver will not recognize your last remaining card, since max you can run with it is 8 GPU. For more than 8, you need 17.11.4. Just mod your bios as your AB setting, if you really need to use that 2 remaining card.

Update.

I re-built my setup from scratch. Re-installed windows on a new ssd .
Here is what works for me:

The Asrock mobo doesn't give me picture on my screen even when i clean installed everything and had my screen connected to a graphics card. Im using XFX RX580's.
In bios the default graphics is PCIE2 but if i have a card connected on it either directly or via riser it just gives me black screen and i cant even access bios.
So i used the onboard graphics to setup windows. Once i had windows i shut down and put ONE card on the main PCIE which is PCIE2.
Then at the first boot with ONE AMD card i installed the drivers Bakhtra kept mentioning 17.11.4.
Then i restart and switch the Global setting function to compute in the AMD settings. Shut down again.
After installing the first card i went ahead and connected 7 more cards. I did then ALL at once. Then i switched the setting for each card.
One thing i noticed with the 17.11.14 drives was that i could not get MSI afterburner to work. I could not change clock or mem Hz at all. Claymore gave me about 26Mh/s

So then i used DDU and after switching back to onboard graphics i installed the latest AMD blockchain drivers. This time after the restart all the cards were shown. One small detail. I have a card connected to the main PCIE but no card connected to the slot right before it. Havent tweaked anything in the bios either.
Windows now sees 8 cards and with the latest drivers i can use Afterburner and get some extra juice off of my cards.

Running Claymore at the moment at 29.9 - 30Mh's

Quick note: I had to up windows virtual memory cause claymore gave me a DAG error. After adding more virtual memory everything works as a charm!

Now waiting for the triple PSU cable to connect the other 2 cards remaining and have a 10x RX580's setup.

I ll try to help as much as i can if anyone else getting crap from that board..

Also it wont recognize Intel M.2 SSD's..

My mobo wont let me boot into bios with an AMD card. Nvidia card works but my RX580 doesn't. I tried both stock and modified bios.

I have to switch to onboard graphics. Install windows and then do the rest. Install drivers and then i get image from a card but NOT if it is plugged in the main PCIe.
Asrock is seriously crap so far!

It only shows the 7 of them. You just set them all to gen1 and then save and restart. Then first try 8 cards. Login let all the drives load. Shut down, add the 9th. I had to skip one of the PCIe slots so my 9th is plugged into my 10th port. I had the same trouble you guys are having, even crashed the damn thing a few times and had to unplug the cards. First time only 6 would work. I did do as was suggested and try to install the other catalyst driver. Now running w/ 9 cards. All AMD RX580.

Anyhow, thats pretty much all I did after having the same problems. The steps all were posted above I think.

I just reset bios and change to gen 1 for all. No other changes needed, oh I use PCI2 as display. What you need is correct windows and driver.

Could someone else using this mobo post a picture of what your bios look like when running on 10 or more cards?

Since PSU efficiency 90% so max on wall is 1666w for 1500w PSU (100%), but rule said 80% from that that's why 1333w max on wall.

1500 corsair can go much higher on power in , on wall i mean like 1600

Bahktra

I was having the same issue with the motherboard seeing only 7 slots in bios and 7 cards in windows BEFORE i even installed ANY drivers. Firstly i installed the wrong drivers but then used DDU and after restart it still only showed SEVEN cards.
Now i managed to pinpoint another problem. When i have a card connected to the main pciE slot i get a black screen. Switching to the onboard graphics gives no image either and i CANNOT access bios.
I think the board is faulty. Going to return it today.

Will see what they tell me at the shop.

it is possible to run more than 10 GTX 1080ti on this board (OS UBUNTU)?

Yo, it because you use Blockchain Driver. Others can only see 7 GPU. It will shown after you change driver (for me 17.11.4 AMD Drivers). Why not try it? Is it really hard just to download that driver?

The problem is not in the drivers. Even before i installed the AMD blockchain drivers my system in Windows only detected 6x GPU's.

I went and changed the bios setting in the PCI configuration section from Auto to Gen1 for all 7x ports that show up and managed to get 7 out of 8 cards that i have connected now.

Again. My mining speed is very good 30Mh/s. The problem is that windows or motherboard or bios i dont know, wont show all of my cards.

I used the patcher too so no worries about that either.


Anyone else experiencing issues with this mobo?