Avalon ASIC users thread - page 160.

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: cryptograd on June 24, 2013, 02:08:13 PM

Is this a specifically a software problem(Cgminer) or does this indicate possible hardware damage due to overclocking?

Its a configuration/software issue. Seen this a couple of times as I was flashing within the various firmware. You can try flashing it back to the stock firmware. Hard Reboot, Cgminer configuration, change the speed settings, save & reapply settings.

elasticband

legendary

Activity: 1036

Merit: 1000

Nighty Night Don't Let The Trolls Bite Nom Nom Nom

no idea.... if that does nto work then maybe..... try flashing back to old firmware maybe?

cryptograd

member

Activity: 112

Merit: 10

Quote from: elasticband on June 24, 2013, 01:25:55 PM

Quote from: cryptograd on June 24, 2013, 01:13:40 PM

Quote from: ewibit on June 24, 2013, 10:40:28 AM

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

(perhaps my mistake was that I have kept settings)

I got this same exact Cgminer API error

HELP ME PLEASE!

My unit has been offline for 8 hours now Sad

kill cgminer process (needs to be done twice)
save config again.... try 345 instead of 350... it seems more stable for me
goto startup and RESTART cgminer.....

repeat this process every 5mins if not working

Is this a specifically a software problem(Cgminer) or does this indicate possible hardware damage due to overclocking?

melmo

full member

Activity: 213

Merit: 100

Quote from: elasticband on June 24, 2013, 01:16:32 PM

http://www.mycom.nl/hardware/voedingen/9687/corsair-tx750m

is this good enough for upgrading a batch 1 PSU?

Mine had a 750 watt Gold Enermax, so replacing with a 750 watt Bronze power supply may not be an upgrade.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: elasticband on June 24, 2013, 01:25:55 PM

Quote from: cryptograd on June 24, 2013, 01:13:40 PM

Quote from: ewibit on June 24, 2013, 10:40:28 AM

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

(perhaps my mistake was that I have kept settings)

I got this same exact Cgminer API error

HELP ME PLEASE!

My unit has been offline for 8 hours now Sad

kill cgminer process (needs to be done twice)
save config again.... try 345 instead of 350... it seems more stable for me
goto startup and RESTART cgminer.....

repeat this process every 5mins if not working

Apiallow have you touched it ?

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Is someone able to compile the same firmware but with variable fan speed please?

Temps are 42 and 46 [I only have external air being piped to one intake at the moment so can make the 46 lower]. I need to sleep next to this thing and 4k rpms don't exactly help Cheesy

elasticband

legendary

Activity: 1036

Merit: 1000

Nighty Night Don't Let The Trolls Bite Nom Nom Nom

Quote from: cryptograd on June 24, 2013, 01:13:40 PM

Quote from: ewibit on June 24, 2013, 10:40:28 AM

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

(perhaps my mistake was that I have kept settings)

I got this same exact Cgminer API error

HELP ME PLEASE!

My unit has been offline for 8 hours now Sad

kill cgminer process (needs to be done twice)
save config again.... try 345 instead of 350... it seems more stable for me
goto startup and RESTART cgminer.....

repeat this process every 5mins if not working

Elokane

hero member

Activity: 817

Merit: 1000

Truth is a consensus among neurons www.synereo.com

Quote from: cryptograd on June 24, 2013, 01:13:40 PM

Quote from: ewibit on June 24, 2013, 10:40:28 AM

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

(perhaps my mistake was that I have kept settings)

I got this same exact Cgminer API error

HELP ME PLEASE!

My unit has been offline for 8 hours now Sad

Maybe because you pushed it to 350 stock?

elasticband

legendary

Activity: 1036

Merit: 1000

Nighty Night Don't Let The Trolls Bite Nom Nom Nom

http://www.mycom.nl/hardware/voedingen/9687/corsair-tx750m

is this good enough for upgrading a batch 1 PSU?

cryptograd

member

Activity: 112

Merit: 10

Quote from: ewibit on June 24, 2013, 10:40:28 AM

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

(perhaps my mistake was that I have kept settings)

I got this same exact Cgminer API error

HELP ME PLEASE!

My unit has been offline for 8 hours now Sad

Elokane

hero member

Activity: 817

Merit: 1000

Truth is a consensus among neurons www.synereo.com

So which way do I stack these?

BTW running ckolivas' latest at 325 and works flawlessly for 4 hours now. Cheesy

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Is there a way to set max temp to 48/49? One of the modules sits on 47 which triggers max RPMs.

Also those of you running upright, do you have the PSU at the top or the bottom?

strombom

member

Activity: 77

Merit: 10

Quote from: loshia on June 24, 2013, 07:06:25 AM

PS: Att to strombom

Can you comment why values are different and timing also?

Thank you!
Best

It's timing settings, I did not have the information available so I simply extrapolated the numbers from the four available settings. Maybe those provided by BitSyncom are more optimal, so use them.

elasticband

legendary

Activity: 1036

Merit: 1000

Nighty Night Don't Let The Trolls Bite Nom Nom Nom

Quote from: ewibit on June 24, 2013, 10:40:28 AM

I have tried it and I am back to FW 20130519 which was the most stable for m

with 300 and 325 cgminer runs only a few minutes, the fans went up to 38xx rpm (noisy) and then cgminer restarts

thx for your work

PS: I have learned again -> never change a running system Cheesy

is this a batch one or batch 2?

either way it should not be doing that on 282mhz......

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: ebereon on June 24, 2013, 06:58:41 AM

Thank you ckolivas!

If you could add the 5Mhz steps from strombom into your firmware and the ability to change it via web interface, I will send you a tip of 0.5BTC Wink

+1 for the 5Mhz baby steps. Would be nice

ewibit

legendary

Activity: 2955

Merit: 1049

Quote from: -ck on June 24, 2013, 06:39:36 AM

So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:

I have tried it and I am back to FW 20130519 which was the most stable for me

first I had this

(perhaps my mistake was that I have kept settings)

and then

this was with only 282 Mhz

with 300 and 325 cgminer runs only a few minutes, the fans went up to 38xx rpm (noisy) and then cgminer restarts

thx for your work

PS: I have learned again -> never change a running system Cheesy

server

legendary

Activity: 892

Merit: 1002

1 BTC =1 BTC

Quote from: Elokane on June 24, 2013, 09:08:49 AM

I had one of them a bit farther away from the router and the upload took much longer till it timed out on the first couple of tries.
Either make sure the connection is fine or just do it by connecting it directly to another computer with an ethernet cable.

Thanks, I will try it with a direct cable connection.

server

legendary

Activity: 892

Merit: 1002

1 BTC =1 BTC

Quote from: ebereon on June 24, 2013, 08:48:50 AM

Did you power off/on the maschine? Try another Browser? Turn off antivirus/firewall for this moment?

Yup I tried everything... even modified the upload time-out settings in Firefox.

I think it's possible to start an update script from within the shell.
But if not I will make a direct connection with a laptop orso.

Can someone post the donation settings for ckolivas ?

Elokane

hero member

Activity: 817

Merit: 1000

Truth is a consensus among neurons www.synereo.com

Quote from: server on June 24, 2013, 08:43:03 AM

Is there a way to update the firmware from the shell ?

I can't update from the web interface because it gives me a time-out error.

I had one of them a bit farther away from the router and the upload took much longer till it timed out on the first couple of tries.
Either make sure the connection is fine or just do it by connecting it directly to another computer with an ethernet cable.

ebereon

sr. member

Activity: 397

Merit: 500

Quote from: server on June 24, 2013, 08:43:03 AM

Is there a way to update the firmware from the shell ?

I can't update from the web interface because it gives me a time-out error.

Did you power off/on the maschine? Try another Browser? Turn off antivirus/firewall for this moment?

I use chrome and works without problems.

Sry I can't help with shell update.

Topic: Avalon ASIC users thread - page 160. (Read 438600 times)