Avalon ASIC users thread - page 22. | Bitcointalksearch.org

ManeBjorn

legendary

Activity: 1288

Merit: 1004

It's been nuts lately. On I knew was a risk and a couple of us tried anyways. The other was a trusted seller on here. .09 gone to that one and .13 or so gone total.
I could have used that towards a miner I am .15 short to buy. I would have been happy with their products. Now I see a lost opportunity and lose a bit more faith in people.
Last night you helped rebuild that faith though.
Thanks again.

Quote from: gjpminingco on March 05, 2014, 03:37:52 AM

i know i have been scammed a few times my self

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

i know i have been scammed a few times my self

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I wish I could have tipped more but last week I got scammed badly on here.
Now I can mine it back.

Quote from: gjpminingco on March 05, 2014, 02:46:35 AM

Glad i could help you get the speed boost i got ya
and thanks for the tip

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

Glad i could help you get the speed boost i got ya
and thanks for the tip

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Thanks so much for the help.
I sent you a tip. I do not have much but I appreciate your help immensely.

I am so happy right now.
The whole unit is running so much better.

Quote from: gjpminingco on March 05, 2014, 02:16:52 AM

Quote from: ManeBjorn on March 05, 2014, 02:11:55 AM

I cannot get it to connect at all.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

If you want help i can help you do you have Teamviewer?

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Thanks for the help I sent you a PM for team viewer.

Quote from: gjpminingco on March 05, 2014, 02:16:52 AM

Quote from: ManeBjorn on March 05, 2014, 02:11:55 AM

I cannot get it to connect at all.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

If you want help i can help you do you have Teamviewer?

ManeBjorn

legendary

Activity: 1288

Merit: 1004

No I don't but I can get it if you give me a min?

Quote from: gjpminingco on March 05, 2014, 02:16:52 AM

Quote from: ManeBjorn on March 05, 2014, 02:11:55 AM

I cannot get it to connect at all.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

If you want help i can help you do you have Teamviewer?

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

Quote from: ManeBjorn on March 05, 2014, 02:11:55 AM

I cannot get it to connect at all.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

If you want help i can help you do you have Teamviewer?

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I cannot get it to connect at all.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I updated and all I get is this error.

Quote from: gjpminingco on March 05, 2014, 02:06:46 AM

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

I have had mine running on the one i built for the 110nm chip for a few days I did notice that running at Freq of 375 I got more HW errors but dropping down to 35 DRASTICALLY loweredmy error rate and with the new firmware i got a speed boost when running on CEX

If you want i will post the settings i run

ManeBjorn

legendary

Activity: 1288

Merit: 1004

How has it been running for you?
I am ready to try it but I wanted to see how it was doing for others for a bit first.
Have you seen any improvements and such?
What are the new features?

Quote from: -ck on March 04, 2014, 11:29:55 PM

Quote from: xiangfu on March 04, 2014, 11:24:56 PM

Hi

A new firmware for Avalon machine:

ChangeLog:
https://en.bitcoin.it/wiki/Avalon1#20140227

Download:
http://downloads.canaan-creative.com/software/avalon/20140227/

The main update was update cgminer to 4.0.0. thanks for GJPMiningco for build the firmware.

Xiangfu

Did you miss the part where i offered firmware?
http://ck.kolivas.org/apps/cgminer/avalon/20140228/

Admittedly it was blindly built, but one user tried it and it was fine.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

How does it work?
Does it give any improvements in performance and stability??

Quote from: xiangfu on March 04, 2014, 11:24:56 PM

Hi

A new firmware for Avalon machine:

ChangeLog:
https://en.bitcoin.it/wiki/Avalon1#20140227

Download:
http://downloads.canaan-creative.com/software/avalon/20140227/

The main update was update cgminer to 4.0.0. thanks for GJPMiningco for build the firmware.

Xiangfu

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: xiangfu on March 04, 2014, 11:24:56 PM

Hi

A new firmware for Avalon machine:

ChangeLog:
https://en.bitcoin.it/wiki/Avalon1#20140227

Download:
http://downloads.canaan-creative.com/software/avalon/20140227/

The main update was update cgminer to 4.0.0. thanks for GJPMiningco for build the firmware.

Xiangfu

Did you miss the part where i offered firmware?
http://ck.kolivas.org/apps/cgminer/avalon/20140228/

Admittedly it was blindly built, but one user tried it and it was fine.

xiangfu

full member

Activity: 120

Merit: 100

Hi

A new firmware for Avalon machine:

ChangeLog:
https://en.bitcoin.it/wiki/Avalon1#20140227

Download:
http://downloads.canaan-creative.com/software/avalon/20140227/

The main update was update cgminer to 4.0.0. thanks for GJPMiningco for build the firmware.

Xiangfu

ManeBjorn

legendary

Activity: 1288

Merit: 1004

With MultiMiner you setup a stratum proxy that will allow you to point the Avalon at the pool of your choice or possibly solo mine. Ask on the MultiMiner thread as many people there can help you get going.
Plus as was said before if you check on the P2Pool threads you will get lots of help doing what you want as well.

Quote from: sacskate on March 01, 2014, 10:37:36 PM

Will check into multi miner. I meant the ip of the miner. I mine scrypt with gpus solo with wallets on different pc's with no problem. I'll try multi miner and report back, thanks for the help!

Edit: I don't think multi miner will help as I cannot install it on the avalon. It is a stand alone unit. It has cgminer installed on it. I did mange to get the avalon to connect to my wallet, but cgminer shows no hashrate and all getworks.

smoothrunnings

hero member

Activity: 630

Merit: 501

Quote from: sacskate on March 01, 2014, 07:52:48 PM

I know people here hate altcoins. But no one else can answer my questions. I have Btmine avalon clone. I have actually roi'ed it with sha altcoins. Currently I have to use pools for my avalon. I would love to be able to solo mine sha alt coins with it. I have the ip of my miner in my .conf for the wallet but it still does not connect. I've heard that it's basically impossible to solo sha altcoins with an avalon. Is this correct?

What are you using P2Pool? If so ask in the P2Pool mining -> Pool forum for help.

sacskate

hero member

Activity: 994

Merit: 500

Will check into multi miner. I meant the ip of the miner. I mine scrypt with gpus solo with wallets on different pc's with no problem. I'll try multi miner and report back, thanks for the help!

Edit: I don't think multi miner will help as I cannot install it on the avalon. It is a stand alone unit. It has cgminer installed on it. I did mange to get the avalon to connect to my wallet, but cgminer shows no hashrate and all getworks.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I would run MultiMiner and use it's as a stratum.
From there you can setup to mine on pools and even solo mine.
The easy to use GUI makes setup easy and nwools supports it solidly answering questions right on here in this thread.
https://bitcointalksearch.org/topic/multiminer-any-miner-any-where-on-any-device-free-open-source-cross-platform-248173

Quote from: sacskate on March 01, 2014, 10:21:56 PM

I have been very careful. I run the wallets on a pc that has nothing on it anyway. My question was though, how would I solo mine these coins from the avalon clone. I put rpcallowip=thewalletsip in the config for the coin, but the miner will not connect to the wallet. I've opened the ports on my router. I've done rather well mining alts, it just sucks that I always find over double the blocks for the pools as I actually get paid out, and would love to solo.

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

sacskate if you would like i can setup everything for ya, any tips would be appreciated

Topic: Avalon ASIC users thread - page 22. (Read 438714 times)