Avalon ASIC users thread - page 24. | Bitcointalksearch.org

smoothrunnings

hero member

Activity: 630

Merit: 501

Quote from: -ck on February 28, 2014, 06:19:45 AM

Quote from: ?? on ??

Quote from: smoothrunnings on February 27, 2014, 07:26:32 AM

Con Kolivas <[email protected]> also develops firmware for the Avy, so I am surprised he hasn't come out with an update. But I have alerted him to this post so hopefully he comes out with something soon; I find his updates are better than YiFU's.

My avalon fell below profitable mining so it's gone. Hence I'm not doing any more firmware.

Actually I still have all my automated scripts for building it lying around, so if you're brave, here is firmware that is done completely blindly and totally untested for 55 and 110nm avalons with cgminer 4.0.1

http://ck.kolivas.org/apps/cgminer/avalon/20140228/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

Hey I tried your firmware in my Avalon mini and it didn't load in properly, it just restarted part way through the push and luckily the old firmware is still working. I didn't dump the old setting as I wasn't sure what it would do. LOL

Entropy-uc

hero member

Activity: 756

Merit: 501

Quote from: -ck on February 28, 2014, 06:19:45 AM

My avalon fell below profitable mining so it's gone. Hence I'm not doing any more firmware.

How much are you paying for electricity that it's no longer profitable? Mine is still ~75% profit.

Or did you just run out of power / cooling capacity for more efficient gear?

smoothrunnings

hero member

Activity: 630

Merit: 501

Quote from: -ck on February 28, 2014, 06:19:45 AM

Quote from: ?? on ??

Quote from: smoothrunnings on February 27, 2014, 07:26:32 AM

Con Kolivas <[email protected]> also develops firmware for the Avy, so I am surprised he hasn't come out with an update. But I have alerted him to this post so hopefully he comes out with something soon; I find his updates are better than YiFU's.

My avalon fell below profitable mining so it's gone. Hence I'm not doing any more firmware.

Actually I still have all my automated scripts for building it lying around, so if you're brave, here is firmware that is done completely blindly and totally untested for 55 and 110nm avalons with cgminer 4.0.1

http://ck.kolivas.org/apps/cgminer/avalon/20140228/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

As long as there are still some coins to be made I am going to keep running my Avalon's.

Thanks for the firmware.

pnoch

full member

Activity: 127

Merit: 100

Quote from: -ck on February 28, 2014, 06:19:45 AM

Quote from: ?? on ??

Quote from: smoothrunnings on February 27, 2014, 07:26:32 AM

Con Kolivas <[email protected]> also develops firmware for the Avy, so I am surprised he hasn't come out with an update. But I have alerted him to this post so hopefully he comes out with something soon; I find his updates are better than YiFU's.

My avalon fell below profitable mining so it's gone. Hence I'm not doing any more firmware.

Actually I still have all my automated scripts for building it lying around, so if you're brave, here is firmware that is done completely blindly and totally untested for 55 and 110nm avalons with cgminer 4.0.1

http://ck.kolivas.org/apps/cgminer/avalon/20140228/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

Working fine so far on one of my 55nm, will try on all the machines now

Thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: ?? on ??

Quote from: smoothrunnings on February 27, 2014, 07:26:32 AM

Con Kolivas <[email protected]> also develops firmware for the Avy, so I am surprised he hasn't come out with an update. But I have alerted him to this post so hopefully he comes out with something soon; I find his updates are better than YiFU's.

My avalon fell below profitable mining so it's gone. Hence I'm not doing any more firmware.

Actually I still have all my automated scripts for building it lying around, so if you're brave, here is firmware that is done completely blindly and totally untested for 55 and 110nm avalons with cgminer 4.0.1

http://ck.kolivas.org/apps/cgminer/avalon/20140228/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

smoothrunnings

hero member

Activity: 630

Merit: 501

Quote from: gjpminingco on February 27, 2014, 04:29:09 PM

i have tried running 16 and 24
and still i get

[match_work_count1] => 3878
[match_work_count2] => 3755
[match_work_count3] => 3849
[match_work_count4] => 3763
[match_work_count5] => 3786
[match_work_count6] => 3785
[match_work_count7] => 3799
[match_work_count8] => 3717
[match_work_count9] => 3949
[match_work_count10] => 3846
[match_work_count11] => 3886
[match_work_count12] => 3762
[match_work_count13] => 3858
[match_work_count14] => 3822
[match_work_count15] => 3734
[match_work_count16] => 0

but even missing that 1 i am getting pretty good speed with it

So the only thing to do is check the cables inside, and see if the last sub board is burnt in anyway.

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

i have tried running 16 and 24
and still i get

[match_work_count1] => 3878
[match_work_count2] => 3755
[match_work_count3] => 3849
[match_work_count4] => 3763
[match_work_count5] => 3786
[match_work_count6] => 3785
[match_work_count7] => 3799
[match_work_count8] => 3717
[match_work_count9] => 3949
[match_work_count10] => 3846
[match_work_count11] => 3886
[match_work_count12] => 3762
[match_work_count13] => 3858
[match_work_count14] => 3822
[match_work_count15] => 3734
[match_work_count16] => 0

but even missing that 1 i am getting pretty good speed with it

smoothrunnings

hero member

Activity: 630

Merit: 501

Quote from: gjpminingco on February 27, 2014, 02:30:36 AM

Well i wrote this update with the help of XiangFu

the update is that you are now able to run CGminer 4.0.0 which before this update the avalon mini was running 3.9.0

I am seeing about a 5ghs improvement ( normal speed was 47ghs - 49ghs before update due to a bad chip or miner since only 15 of the 16 chips/miners work )

if someone can show or tell me how i can post a pic i will post the pic up to prove new speeds

Are you running 24 or 16 miner count? If you set the miner to 24 miner count all 16 miners should work without a hitch unless you have managed to fry a sub board. Also the miner is supposed to be running at 350Mhz by default which would put it around 55-59GH/s. At 400Mhz my miner does closer to 62GH/s but I don't recommend you running at 400Mhz unless you plan to put your miner into a deep freezer.

Con Kolivas <[email protected]> also develops firmware for the Avy, so I am surprised he hasn't come out with an update. But I have alerted him to this post so hopefully he comes out with something soon; I find his updates are better than YiFU's.

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

Well i wrote this update with the help of XiangFu

the update is that you are now able to run CGminer 4.0.0 which before this update the avalon mini was running 3.9.0

I am seeing about a 5ghs improvement ( normal speed was 47ghs - 49ghs before update due to a bad chip or miner since only 15 of the 16 chips/miners work )

if someone can show or tell me how i can post a pic i will post the pic up to prove new speeds

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Nice!
I wonder if they will ever put out an update like that for my Gen 1 Avalon 70 gh/s unit?
Good luck and keep us up to date on your progress.

Quote from: gjpminingco on February 27, 2014, 02:20:23 AM

WOOOOOT

it works and I am getting better speed also

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

WOOOOOT

it works and I am getting better speed also

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

Hey I would thought i would let everyone know that i am working on a update for the Avalon Mini's to allow you to update to cgminer 4.0.0 from 3.9.0

I will keep you all up to date on my progress

smoothrunnings

hero member

Activity: 630

Merit: 501

Avalon issues. Sad

My B1 is having issues, I suspect the PSU is on it's last legs. This morning I noticed my light stopped blinking on my Avalon, when I checked my P2Pool the hashrate was very low, but higher more than my 60 + 12GH running. So I powered it down for a couple of minutes then powered it up and it started hashing normally again.

I just checked now remotely and notice my P2Pool shows I am doing 160GH/s out of the 180+, I checked the Avalon and noticed that all cards are working but the error rate is at 2.4 (yikes), I did a soft reboot. I suspect my AX860i is going because when the power goes off and on (I rarely have power brown outs or power loss but when I do I notice this) the PSU doesn't come back on properly and the Avy show's a red light forcing me to power it off and waiting a few seconds then powering it back on. Does this sound right?

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Very cool.
I had never done that on my Avalon they are both still on now. LOL
I might turn it off too.

Quote from: gjpminingco on February 23, 2014, 11:16:12 PM

hey all I got it setup

I had to disable the Lan connectionand once i did that it started accepting connections via the wifi

Thanks for all the PMs and Help everyone

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

hey all I got it setup

I had to disable the Lan connectionand once i did that it started accepting connections via the wifi

Thanks for all the PMs and Help everyone

ste0024

sr. member

Activity: 462

Merit: 250

Quote from: gjpminingco on February 22, 2014, 05:52:30 PM

ok if anyone has the know how to config a Avalon Mini ( 60ghs model ) to connect to wifi and start mining and allow the access to the config page via the wifi connection and if someone can help me do this i have like 0.0008 btc i can send ya for the help since i am very tight on funds after buying this thing

easy

i use all my 4 mini in wifi and i can check in wifi.

i can do with teamweiver

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

ok if anyone has the know how to config a Avalon Mini ( 60ghs model ) to connect to wifi and start mining and allow the access to the config page via the wifi connection and if someone can help me do this i have like 0.0008 btc i can send ya for the help since i am very tight on funds after buying this thing

ManeBjorn

legendary

Activity: 1288

Merit: 1004

That is weird. You might have to use the hardware reset button if it has one inside like some do. That will get you back to default and you can go in.
If the IP address is showing in the router though you should still be able to get to it unless there is a firewall block on your computers end though.
I wish I could help more.

Quote from: gjpminingco on February 22, 2014, 03:49:44 PM

nope i have tried that, it seems like the page can only be accessed on the IP that is assigned to the lan connection.

No matter what i have done i cant get it to work right

gjpminingco

sr. member

Activity: 350

Merit: 250

Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s

nope i have tried that, it seems like the page can only be accessed on the IP that is assigned to the lan connection.

No matter what i have done i cant get it to work right

ManeBjorn

legendary

Activity: 1288

Merit: 1004

It might be that it has a new IP Address.
Go into your router and check the clients list and once you find it type that into your browser to get to the login screen.
That should allow you back in with no issues.
I hope that helps you.

Quote from: gjpminingco on February 22, 2014, 03:23:41 PM

Hey is there any way to make an AVALON Mini respond to the Config page over Wifi connection???
I have it in another room and it is connected over wifi but it will only allow me to config it if i am connedted via lan, and Since this is being moved to another location in a few days i want to be able to remote access to this device ( API ) once it is in the new location ( all the way across town )

Topic: Avalon ASIC users thread - page 24. (Read 438516 times)